Amy Elliott - Publications, H-index & Citations

Amy Elliott

Oak Ridge National Laboratory

28H指数

99论文数

3.8K被引数

收录论文 22

发表时间

Influence of silicon infiltration conditions on microstructure and mechanical properties in binder jet 3D printed SiC 硅浸渗条件对粘结剂喷射3D打印SiC微观结构和力学性能的影响

Journal of the European Ceramic Society

IF6.2

2026-02-11

PREAI

Bola Yoon; Benjamin Groth; Marco C. Martinez; Trevor G. Aguirre; Amy M. Elliott; Corson L. Cramer

Packing density optimization and recyclability of multi-modal SiC powder feedstocks in binder jet additive manufacturing 粘结剂喷射增材制造中多模态SiC粉末喂料体系的堆积密度优化与可回收性

Ceramics International

IF5.6

2025-07-30

PREAI

Trevor G. Aguirre; Bhargavi Mummareddy; M. Dylan Richardson; Amy M. Elliott; Corson L. Cramer; Thomas R. Muth; Kashif Nawaz; Bradley J. Brennan

Process development of NiTi using binder jetting additive manufacturing: Investigation of the sintering process 使用粘合剂喷射增材制造的NiTi的工艺开发: 烧结过程的研究

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2024-10-01

OAAI

Pourshams, Mohammad; Elliott, Amy; Chinnasamy, Chins; Poorganji, Behrang; Benafan, Othmane; Elahinia, Mohammad

Surface Finishing and Coating Parameters Impact on Additively Manufactured Binder-Jetted Steel-Bronze Composites

MATERIALS

IF3.2

2024-01-26

OAAI

Grizzle, Andrew C.; Elliott, Amy; Klein, Kate L.; Tyagi, Pawan

Machine Learning-Enabled Quantitative Analysis of Optically Obscure Scratches on Nickel-Plated Additively Manufactured (AM) Samples

MATERIALS

IF3.2

2023-09-20

OAAI

Mengesha, Betelhiem N.; Grizzle, Andrew C.; Demisse, Wondwosen; Klein, Kate L.; Elliott, Amy; Tyagi, Pawan

Spray coating for washout tooling by binder jet additive manufacturing

COMPOSITES PART B-ENGINEERING

IF14.2

2023-02-01

OAAI

Han, Lu; Gilmer, Dustin B.; Elliott, Amy; Saito, Tomonori

Additive manufacturing of strong silica sand structures enabled by polyethyleneimine binder

NATURE COMMUNICATIONS

IF15.7

2021-08-26

OAAI

Gilmer, Dustin B.; Han, Lu; Lehmann, Michelle L.; Siddel, Derek H.; Yang, Guang; Chowdhury, Azhad U.; Doughty, Benjamin; Elliott, Amy M.; Saito, Tomonori

Properties of SiC-Si made via binder jet 3D printing of SiC powder, carbon addition, and silicon melt infiltration

JOURNAL OF THE AMERICAN CERAMIC SOCIETY

IF3.8

2021-06-11

OAAI

Cramer, Corson L.; Elliott, Amy M.; Lara-Curzio, Edgar; Flores-Betancourt, Alexis; Lance, Michael J.; Han, Lu; Blacker, Jesse; Trofimov, Artem A.; Wang, Hsin; Cakmak, Ercan; Nawaz, Kashif

Binder jet 3D printing?Process parameters, materials, properties, modeling, and challenges*Binder jet 3D打印？工艺参数、材料、属性、建模和挑战 *

PROGRESS IN MATERIALS SCIENCE

IF40

2021-06-01

570

OAAI

Mostafaei, Amir; Elliott, Amy M.; Barnes, John E.; Li, Fangzhou; Tan, Wenda; Cramer, Corson L.; Nandwana, Peeyush; Chmielus, Markus

W-ZrC composites prepared by reactive melt infiltration of Zr2Cu alloy into binder jet 3D printed WC preforms

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2021-01-01

OAAI

Mudanyi, Rina K.; Cramer, Corson L.; Elliott, Amy M.; Unocic, Kinga A.; Guo, Qianying; Kumar, Dhananjay

Development, implementation and optimization of a mobile 3D printing platform

PROGRESS IN ADDITIVE MANUFACTURING

IF5.4

2020-11-20

PREAI

Sauter, Andreas; Nasirov, Aslan; Fidan, Ismail; Allen, Michael; Elliott, Amy; Cossette, Mel; Tackett, Ed; Singer, Thomas

High-Performance Titanium Oxynitride Thin Films for Electrocatalytic Water Oxidation

ACS APPLIED ENERGY MATERIALS

IF5.5

2020-08-04

OAAI

Mucha, Nikhil Reddy; Som, Jacob; Choi, Jonghyun; Shaji, Surabhi; Gupta, Ram K.; Meyer, Harry M.; Cramer, Corson L.; Elliott, Amy M.; Kumar, Dhananjay

Binder jet printed WC infiltrated with pre-made melt of WC and Co 用WC和Co的预制熔体渗透的粘合剂喷射印刷WC

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2020-02-01

OAAI

Cramer, Corson L.; Aguirre, Trevor G.; Wieber, Natalie R.; Lowden, Richard A.; Trofimov, Artem A.; Wang, Hsin; Yan, Jiaqiang; Paranthaman, M. Parans; Elliott, Amy M.

Binder jet additive manufacturing method to fabricate near net shape crack-free highly dense Fe-6.5 wt.% Si soft magnets

HELIYON

IF3.6

2019-11-01

OAAI

Cramer, Corson L.; Nandwana, Peeyush; Yan, Jiaqiang; Evans, Samuel F.; Elliott, Amy M.; Chinnasamy, Chins; Paranthaman, M. Parans

Microstructure evolution during near-net-shape fabrication of NixAly-TiC cermets through binder jet additive manufacturing and pressureless melt infiltration 通过粘合剂喷射增材制造和无压熔体渗透在NixAly-TiC金属陶瓷的近净成形过程中的微观结构演变

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2019-11-01

OAAI

Arnold, Joshua M.; Cramer, Corson L.; Elliott, Amy M.; Nandwana, Peeyush; Babu, Sudarsanam Suresh