logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
G

Giovanni Meneghetti

university of padua

38H指数
314论文数
4.9K被引数
收录论文 91
发表时间
logo
Guest Editorial: Characterization of Crack/Notch Tip Fields (CCTF7)客座编辑：裂纹/缺口尖端场的表征（CCTF7）
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2026-09-12
err0
errOAAI
errYoushi Hong; Michael Vormwald; Luca Susmel; Giovanni Meneghetti; Thierry Palin-Luc
err分享
err收藏
Fatigue lifetime assessment of as-welded and HFMI treated lean duplex steel butt joints subjected to constant and variable amplitude axial loading according to the peak stress method根据峰值应力法评估承受恒定和变幅轴向载荷的焊态及HFMI处理的低合金双相钢对接接头的疲劳寿命
errEngineering Failure Analysis
IF5.7
err2026-08-13
err0
errOAAI
errAlberto Campagnolo; Miloslav Kepka; Miloslav Kepka; Giovanni Meneghetti
err分享
err收藏
A novel notch mechanics-based fatigue assessment of additively manufactured lattice structures from aluminium A205基于缺口力学的新型增材制造铝A205点阵结构疲劳评估
errInternational Journal of Fatigue
IF6.8
err2026-05-07
err0
errOAAI
errFrancesco Collini; Berk Baris Celik; Emilie Beevers; Brecht Van Hooreweder; Giovanni Meneghetti
err分享
err收藏
Probabilistic fatigue limit estimation in welded joints containing defects using the cyclic R-curve analysis and the Peak Stress Method基于循环R曲线分析和峰值应力法的含缺陷焊接接头疲劳极限概率估计
errInternational Journal of Fatigue
IF6.8
err2026-04-27
err0
errOAAI
errLuca Vecchiato; Giovanni Meneghetti
err分享
err收藏
A critical analysis of the fatigue life assessment for arc-welded similar and dissimilar joints in additively manufactured and wrought stainless steel using the peak stress method基于峰值应力法对增材制造和锻造不锈钢中弧焊同种及异种接头疲劳寿命评估的批判性分析
errInternational Journal of Fatigue
IF6.8
err2026-03-06
err0
errOAAI
errLucrezia Contiero; Luca Vecchiato; Alberto Campagnolo; Vittorio Babini; Giovanni Meneghetti
err分享
err收藏
Fatigue Design of Tubular Carbon–Aluminium Bonded Joints Under Constant- and Variable-Amplitude Fatigue管状碳-铝粘接接头的恒幅和变幅疲劳设计
errMaterials
IF3.2
err2026-02-27
err0
errOAAI
errMauro Ricotta; Gianmaria Bettio; Giovanni Meneghetti
err分享
err收藏
Calculation of plastic notch stress intensity factor and strain energy density by Peak Stress Method under low-cycle fatigue conditions低周疲劳条件下基于峰值应力法的塑性缺口应力强度因子和应变能密度计算
errTheoretical and Applied Fracture Mechanics
IF5.6
err2025-12-16
err0
errOAAI
errDomen Šeruga; Alberto Campagnolo; Jernej Klemenc; Giovanni Meneghetti
err分享
err收藏
Advancement of IIW Fatigue Design Concepts by Applying the Peak Stress Method to Offshore Welded K-Nodes通过应用峰值应力法推进IIW疲劳设计概念在离岸焊接K节点中的应用
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2025-12-01
err0
PREAI
errMeneghetti, G.; Sonsino, C. M.; Visentin, A.; Campagnolo, A.
err分享
err收藏
Fatigue Lifetime Assessment of HFMI-Treated Welded Joints According to the Peak Stress Method根据峰值应力法对HFMI处理焊缝接头的疲劳寿命评估
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2025-12-01
err0
errOAAI
errCampagnolo, Alberto; Leitner, Martin; Meneghetti, Giovanni
err分享
err收藏
Fatigue lifetime assessment of tube-to-flange arc-welded steel joints with reinforcement ribs under constant and variable amplitude multiaxial fatigue loadings according to the Peak Stress Method根据峰值应力法，对带加强筋的管法兰弧焊钢接头在恒幅和变幅多轴疲劳载荷下的疲劳寿命评估
errInternational Journal of Fatigue
IF6.8
err2025-07-05
err0
errOAAI
errAlberto Visentin; Alberto Campagnolo; Vittorio Babini; Giovanni Meneghetti
err分享
err收藏
Fracture and notch mechanics to estimate the uniaxial fatigue limit of plain and severely notched L-PBF AlSi10Mg specimens断裂与缺口力学用于估算普通和严重缺口L-PBF AlSi10Mg试样的单轴疲劳极限
errEngineering Fracture Mechanics
IF5.3
err2025-06-30
err0
errOAAI
errFrancesco Collini; Giovanni Meneghetti
err分享
err收藏
Fatigue life assessment of steel specimens with weld ends and complex cracking scenarios by crack propagation numerical analyses含焊缝端部及复杂裂纹扩展情形的钢试样疲劳寿命评估数值分析
errInternational Journal of Fatigue
IF6.8
err2025-06-23
err0
PREAI
errV. Giannella; A. Campagnolo; R. Sepe; R. Citarella; G. Meneghetti
err分享
err收藏
Potentials and limitations of direct current potential drop for measuring elliptical cracks in round bars用于测量圆棒中椭圆形裂纹的直流电位降的电势和局限性
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2025-04-22
err0
errOAAI
errVecchiato, Luca; Campagnolo, Alberto; Cova, Matteo; Meneghetti, Giovanni
err分享
err收藏
Notch and Fracture Mechanics-Based Assessment of Multiaxial Fatigue Thresholds of Defects and Sharp Notches in Metallic Materials基于缺口和断裂力学的金属材料中缺陷和尖锐缺口的多轴乏力阈值评估
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2025-01-15
err0
errOAAI
errCollini, Francesco; Rigon, Daniele; Meneghetti, Giovanni
err分享
err收藏
A Master Curve for Fatigue Design of Notched Nodular Cast Iron Components Based on the Local Averaged Strain Energy Density基于局部平均应变能密度的缺口球墨铸铁零件乏力设计的主曲线
errMATERIALS
IF3.2
err2024-09-29
err0
errOAAI
errPelizzari, Jacopo; Campagnolo, Alberto; Dengo, Carlo; Meneghetti, Giovanni
err分享
err收藏
Static strength assessment of short glass fibre-reinforced polyphenilenesulphide in presence of notches according to different approaches
errCOMPOSITE STRUCTURES
IF7.1
err2024-09-01
err0
errOAAI
errResente, A.; Ricotta, M.; Sorgato, M.; Meneghetti, G.
err分享
err收藏
Highly porous carbon-SiC composites with continuous carbon fibers for the production of radioisotopes in ISOL facilities
errJOURNAL OF THE EUROPEAN CERAMIC SOCIETY
IF6.2
err2024-09-01
err1
PREAI
errSciti, Diletta; Corradetti, Stefano; Manzolaro, Mattia; Ballan, Michele; Cesarotto, Dario; Meneghetti, Giovanni; Silvestroni, Laura; Servadei, Francesca; Zoli, Luca
err分享
err收藏
Experimental and numerical determination of the fatigue notch factor in as-built wire arc additive manufacturing steel components成品电弧增材制造钢构件中乏力缺口因子的实验和数值确定
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2024-08-28
err0
errOAAI
errLeonetti, Davide; Zancato, Elena; Meneghetti, Giovanni; Maljaars, Johan
err分享
err收藏
Towards a fracture mechanics-based fatigue assessment of lattice structures obtained from additive manufacturing of metallic powders基于断裂力学的乏力评估从金属粉末的增材制造获得的晶格结构
errMATERIALS & DESIGN
IF7.9
err2024-08-01
err0
errOAAI
errCollini, Francesco; Meneghetti, Giovanni
err分享
err收藏
Ultra-lightweight silicon nitride truss-based structures fabricated via UV-assisted robot direct ink writing通过紫外线辅助机器人直接墨水书写制造的超轻氮化硅桁架结构
errMATERIALS & DESIGN
IF7.9
err2024-08-01
err1
errOAAI
errDe Marzi, Anna; Diener, Sarah; Campagnolo, Alberto; Meneghetti, Giovanni; Katsikis, Nikolaos; Colombo, Paolo; Franchin, Giorgia
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
F
Filippo Berto
H 指数: 79 · 论文数: 1.0K
P
Paolo Colombo
H 指数: 76 · 论文数: 735
P
P. Lazzarin
H 指数: 67 · 论文数: 249
N
Nicola Bianchi
H 指数: 66 · 论文数: 541
F
F. Berto
H 指数: 59 · 论文数: 291
查看更多