Uwe Reisgen - Publications, H-index & Citations

Uwe Reisgen

rwth aachen university

29H指数

624论文数

3.9K被引数

收录论文 79

发表时间

Pre-treatment of thermoplastic GFRP tapes for adhesive bonding of tape-wound pipes for water electrolyzers 热塑性GFRP带材用于水电解槽缠绕管的粘接预处理

The Journal of Adhesion

IF0

2026-03-02

OAAI

Maximilian K. Heym; Alexander Schiebahn; Uwe Reisgen

Evaluation of the mechanical and chemical behavior of adhesives in KOH at elevated temperatures for alkaline water electrolysis 在碱性水电解中，评估KOH高温条件下胶粘剂的机械和化学行为

International Journal of Adhesion and Adhesives

IF3.5

2026-01-05

OAAI

M.K. Heym; CJA Beier; V. Ginster; A. Schiebahn; U. Reisgen

Laser-based surface pretreatment for ultrasonic metal welding of copper and dissimilar aluminium-copper joints 基于激光的表面预处理在铜及异质铝-铜接头超声金属焊中的应用

WELDING IN THE WORLD

IF2.5

2025-12-01

PREAI

Helfers, Eric; Muller, Florian Werner; Schiebahn, Alexander; Reisgen, Uwe

Plasma pre-treatment of pressure-sensitive adhesives

JOURNAL OF ADHESION

IF2.3

2025-12-01

PREAI

Ginster, V.; Heym, M. K.; Schiebahn, A.; Reisgen, U.

Shear force sensors for process monitoring in ultrasonic metal welding-design, calibration, and validation 超声金属焊接过程中的剪切力传感器—设计、校准与验证

WELDING IN THE WORLD

IF2.5

2025-12-01

OAAI

Helfers, Eric; Stockemer, Oliver; Muller, Florian Werner; Schiebahn, Alexander; Reisgen, Uwe; Corves, Burkhard

Material-specific beam-plume interactions during deep-penetration laser welding of stainless steel, aluminum, and copper 特定材料在深穿透激光焊接过程中的钢、铝和铜的束-羽流相互作用

Journal of Advanced Joining Processes

IF4

2025-11-29

OAAI

Johannes Wahl; Christian Frey; John Powell; Michael Haas; Simon Olschok; Uwe Reisgen; Christian Hagenlocher; Thomas Graf

Analysis of particles inside the metal vapor plume during laser beam welding in vacuum using a simplified multi-wavelength method 利用简化的多波长方法分析真空激光束焊接过程中金属蒸气羽流内的粒子

Vacuum

IF3.9

2025-11-29

PREAI

Christian Frey; Johannes Wahl; Simon Olschok; Christian Hagenlocher; Thomas Graf; Uwe Reisgen

Investigation of the applicability of the time-temperature superposition principle within the cryogenic temperature range, illustrated by a two-component epoxy adhesive 通过一种双组分环氧胶粘剂，研究低温范围内时间-温度叠加原理的适用性。

The Journal of Adhesion

IF0

2025-10-07

OAAI

Robert Seewald; Alexander Schiebahn; Uwe Reisgen

Properties of the anode boundary layer in copper vapor at different current densities and pressures 铜蒸气中阳极边界层在不同电流密度和压力下的性质

PHYSICS OF PLASMAS

IF2.2

2025-10-01

OAAI

Denysenko, I. B.; Krivtsun, I. V.; Momot, A. I.; Reisgen, U.; Mokrov, O.; Sharma, R.

Investigating numerically and experimentally the effect of martensite start temperature on the residual stresses and distortion in laser beam welded T-joints 数值和实验研究马氏体开始温度对激光束焊接T型接头残余应力和变形的影响

WELDING IN THE WORLD

IF2.5

2025-09-01

OAAI

Krishna Murthy, Karthik Ravi; Gamerdinger, Maximilian; Olschok, Simon; Reisgen, Uwe

Characterization of particles inside the metal vapor plume during laser beam welding in atmosphere and vacuum

VACUUM

IF3.9

2025-03-01

OAAI

Frey, Christian; Wahl, Johannes; Schmidt, Kathrin; Olschok, Simon; Hagenlocher, Christian; Weirich, Thomas E.; Graf, Thomas; Reisgen, Uwe

Fatigue strength of additively manufactured hot-dip galvanized steel coated with a Zn-5Al alloy Zn-5Al合金涂层的增材制造的热浸镀锌钢的乏力强度

PROGRESS IN ADDITIVE MANUFACTURING

IF5.4

2024-12-05

OAAI

Kuehne, Ronny; Voelkel, Justus; Bartsch, Helen; Feldmann, Markus; Pinger, Thomas; Sharma, Rahul; Reisgen, Uwe

Special issue: 3rd international conference on advanced joining processes 2023 (AJP 2023)特刊: 第三届国际先进加入工艺会议2023 (AJP 2023)

JOURNAL OF ADVANCED JOINING PROCESSES

IF4

2024-11-01

OAAI

da Silva, Lucas F. M.; Martins, Paulo; Reisgen, Uwe

Simulating chemical mixing and molten pool shape in dissimilar welds using thermal fluid dynamics 使用热流体动力学模拟异种焊缝中的化学混合和熔池形状

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

IF5.8

2024-07-01

OAAI

Esmati, Parsa; Flint, Thomas; Akyel, Fatma; Olschok, Simon; Reisgen, Uwe; Cardiff, Philip; Larrosa, Nicolas O.; Grilli, Nicola

In situ EDXRD measurement of the low transformation temperature effect in laser beam welded stainless steel

JOURNAL OF ADVANCED JOINING PROCESSES

IF4

2024-06-01

OAAI

Akyel, F.; Gamerdinger, M.; Maede, K.; Murthy, K. R. Krishna; Olschok, S.; Sharma, R.; Reisgen, U.; Abreu-Faria, G.; Dovzhenko, G.

Investigation of the influence of pulse parameters on the resulting weld seam quality in pulsed electron beam welding of AW 6061

JOURNAL OF ADVANCED JOINING PROCESSES

IF4

2024-06-01

OAAI

Troise, M.; Krichel, T.; Olschok, S.; Reisgen, U.

Influence of surface condition of copper sheets on ultrasonic metal welding

JOURNAL OF ADVANCED JOINING PROCESSES

IF4

2024-06-01

OAAI

Helfers, E.; Mueller, F. W.; Schiebahn, A.; Reisgen, U.

Optimization of weldability and joint strength of Al-Mg-Si with additional Al-Si cladding based on a design of experiments investigation

JOURNAL OF ADVANCED JOINING PROCESSES

IF4

2024-06-01

OAAI

Bamberg, P.; Schiebahn, A.; Marzzona, A.; Christ, M.; Reisgen, U.

Modelling the Evolution of Phases during Laser Beam Welding of Stainless Steel with Low Transformation Temperature Combining Dilatometry Study and FEM

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING

IF3.3

2024-03-01

OAAI

Murthy, Karthik Ravi Krishna; Akyel, Fatma; Reisgen, Uwe; Olschok, Simon; Mahendran, Dhamini

Laser Beam Welding under Vacuum of Hot-Dip Galvanized Constructional Steel

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING

IF3.3

2024-01-22

OAAI

Frey, Christian; Stocks, Ole; Olschok, Simon; Kuehne, Ronny; Feldmann, Markus; Reisgen, Uwe

研究方向