Arcan F. Dericioğlu - Publications, H-index & Citations

Arcan F. Dericioğlu

Middle East Technical University

19H指数

55论文数

1.3K被引数

收录论文 24

发表时间

Investigations on the effect of secondary treatments on Ti48Al2Cr2Nb alloy manufactured by electron beam powder bed fusion method 关于电子束粉末床熔融法制备的Ti48Al2Cr2Nb合金二次处理影响的研究

Intermetallics

IF4.8

2025-09-10

PREAI

Guney Mert Bilgin; Seren Ozer; Kemal Davut; Ziya Esen; Arcan F. Dericioglu

Influence of the heat treatment on the microstructure, mechanical and high-temperature oxidation behavior of Hastelloy X alloy fabricated via laser powder bed fusion 激光粉末床熔融制备的Hastelloy X合金的热处理对其微观结构、力学性能及高温氧化行为的影响

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2025-01-01

PREAI

Ozer, Seren; Yalcin, Mustafa Alp; Bilgin, Gueney Mert; Davut, Kemal; Esen, Ziya; Dericioglu, Arcan F.

Functionalization of glass fiber woven fabrics by indium tin oxide (ITO) coatings for electromagnetic wave absorption

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS

IF4.6

2023-08-01

PREAI

Daricioglu, Merve Ozdil; Durucan, Caner; Dericioglu, Arcan F.

Effect of post fabrication aging treatment on the microstructure, crystallographic texture and elevated temperature mechanical properties of IN718 alloy fabricated by selective laser melting

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2022-08-01

PREAI

Ozer, Seren; Bilgin, Guney Mert; Davut, Kemal; Esen, Ziya; Dericioglu, Arcan F.

Selective laser melting of Nano-TiN reinforced 17-4 PH stainless steel: Densification, microstructure and mechanical properties

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2022-03-01

PREAI

Ozsoy, Andac; Aydogan, Eda; Dericioglu, Arcan F.

Microstructural and texture evolution during thermo-hydrogen processing of Ti6Al4V alloys produced by electron beam melting

MATERIALS CHARACTERIZATION

IF5.5

2020-10-01

PREAI

Dogu, Merve Nur; Esen, Ziya; Davut, Kemal; Tan, Evren; Gumus, Berkay; Dericioglu, Arcan F.

Corrosion behaviours of Ti6Al4V-Mg/Mg-Alloy composites

CORROSION SCIENCE

IF8.5

2020-04-01

PREAI

Esen, Ziya; Butev Ocal, Ezgi; Akkaya, Asli; Gurcay, Bensu; Ozcan, Ceren; Ozgumus, Burcu Asli; Duygulu, Ozgur; Dericioglu, Arcan F.

All 3-D Printed Free-Space Setup for Microwave Dielectric Characterization of Materials

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT

IF5.9

2018-08-01

PREAI

Hajisaeid, Ehsan; Dericioglu, Arcan F.; Akyurtlu, Alkim

Optimization of the mechanical properties of Ti-6Al-4V alloy fabricated by selective laser melting using thermohydrogen processes 使用热氢工艺通过选择性激光熔化制备的Ti-6Al-4V合金的机械性能的优化

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2017-07-01

PREAI

Bilgin, Guney Mert; Esen, Ziya; Akin, Seniz Kushan; Dericioglu, Arcan F.

Nacre-mimetic bulk lamellar composites reinforced with high aspect ratio glass flakes

BIOINSPIRATION & BIOMIMETICS

IF3

2016-12-05

PREAI

Guner, Selen N. Gurbuz; Dericioglu, Arcan F.

Morphology and magnetic properties of barium hexaferrite ceramics synthesized in x wt% NaCl-(100-x) wt% KCL molten salts

CERAMICS INTERNATIONAL

IF5.6

2014-01-01

PREAI

Aydogan, Eda; Kaya, Seray; Dericioglu, Arcan F.

Monotonic and cyclic compressive behavior of superelastic TiNi foams processed by sintering using magnesium space holder technique

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2013-10-01

PREAI

Nakas, G. Ipek; Dericioglu, Arcan F.; Bor, Sakir

Kinematic and Mechanical Profile of the Self-Actuation of Thermosalient Crystal Twins of 1,2,4,5-Tetrabromobenzene: A Molecular Crystalline Analogue of a Bimetallic Strip

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

IF15.6

2013-07-29

150

PREAI

Sahoo, Subash Chandra; Sinha, Shashi Bhushan; Kiran, M. S. R. N.; Ramamurty, Upadrasta; Dericioglu, Arcan F.; Reddy, C. Malla; Naumov, Pance

Titanium-magnesium based composites: Mechanical properties and in-vitro corrosion response in Ringer's solution 钛镁基复合材料: 力学性能和林格溶液中的体外腐蚀响应

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2013-06-01

PREAI

Esen, Ziya; Dikici, Burak; Duygulu, Ozgur; Dericioglu, Arcan F.

Effect of reinforcement surface functionalization on the mechanical properties of nacre-like bulk lamellar composites processed by a hybrid conventional method

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS

IF8.1

2013-05-01

PREAI

Gurbuz, Selen N.; Dericioglu, Arcan F.

Fatigue behavior of TiNi foams processed by the magnesium space holder technique

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS

IF3.5

2011-11-01

PREAI

Nakas, G. Ipek; Dericioglu, Arcan F.; Bor, Sakir

An efficient hybrid conventional method to fabricate nacre-like bulk nano-laminar composites

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS

IF8.1

2009-08-01

OAAI

Ekiz, O. Oner; Dericioglu, Arcan F.; Kakisawa, Hideki

Electromagnetic wave absorption potential of SiC-based ceramic woven fabrics in the GHz range

JOURNAL OF MATERIALS SCIENCE

IF3.9

2009-03-01

PREAI

Tan, E.; Kagawa, Y.; Dericioglu, A. F.

Measurement of residual stress in air plasma-sprayed Y2O3-ZrO2 thermal barrier coating system using micro-Raman spectroscopy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2006-03-01

PREAI

Tanaka, M; Hasegawa, M; Dericioglu, AF; Kagawa, Y

Processing and characterisation of model optomechanical composites in the system sapphire fibre/borosilicate glass matrix

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2005-11-01

PREAI

Boccaccini, AR; Acevedo, D; Dericioglu, AF; Jana, C

研究方向