Jihong Zhu - Publications, H-index & Citations

Jihong Zhu

northwestern polytechnical university

46H指数

319论文数

1.0W被引数

收录论文 160

发表时间

Concurrent multi-scale topology optimization for continuous fiber reinforced lattice structure with spatially tunable fiber morphology 连续纤维增强点阵结构的并发多尺度拓扑优化，其纤维形态具有空间可调性

composites part b: engineering

IF0

2026-03-30

PREAI

Chenyang Li; Shangqin Yuan; Chenyang Shi; Xiaobao Zhi; Yamin Li; Jihong Zhu; Weihong Zhang

In-situ photothermal dual-curing of continuous SiC fiber-reinforced thermoset composite via additive manufacturing and post thermal treatment

composites part a: applied science and manufacturing

IF0

2026-01-18

PREAI

Ruikang Zhai; Jianzhong Chai; Chen Liang; Fang Li; Zihan Li; Jihong Zhu; Biao Zhang; Shangqin Yuan

Topology optimization of fuel elements for additive manufacturing to enhance the fluid-thermal performance of nuclear fuel assemblies 针对增材制造燃料元件的拓扑优化，以提升核燃料组件的流热性能

Additive Manufacturing Frontiers

IF0

2025-12-01

OAAI

Huo, Dong; Zhang, Yile; Zhou, Ying; Meng, Liang; Xin, Yong; Liu, Taiying; Zhu, Jihong; Zhang, Weihong

Concurrent Design of Hierarchical Structures with Multi-morphology Lattices Considering Geometric Nonlinearity 考虑几何非线性的多形态点阵材料层次结构的协同设计

Acta Mechanica Solida Sinica

IF2.7

2025-12-01

PREAI

Hou, Jie; Jia, Lifeng; Wang, Chuang; Wang, Jie; Meng, Liang; Zhu, Jihong; Zhang, Weihong

Diverse electromechanical properties of dielectric elastomers processed in acidic–alkaline environments 在酸性–碱性环境中处理的介电弹性体的多样机电性能

Materials & Design

IF7.9

2025-11-24

OAAI

Fan Zhang; Lei Liu; Junshi Zhang; Jihong Zhu; Weihong Zhang

Achieving high strength in laser powder bed fusion in-situ alloyed copper-chromium alloy via nanoprecipitation and heterogeneous strain fields 通过纳米沉淀和异质应变场在激光粉末床熔融原位合金化的铜铬合金中实现高强度

Materials Science and Engineering: A

IF0

2025-11-17

PREAI

Zaiyun Zhang; Yingang Liu; Zexuan Yang; Jihong Zhu

Anti-thermal buckling behavior of NiTi shape memory alloy thin plates: Experiment and modeling NiTi形状记忆合金薄板的抗热屈曲行为：实验与建模

Thin-Walled Structures

IF6.6

2025-11-11

PREAI

Yan Cheng; Jun Wang; Yahui Zhang; Xiaojun Gu; Jihong Zhu; Weihong Zhang

Application of Kolmogorov-Arnold Networks for Predicting Flow Stress Curves of GH4698 Alloy in Hot Deformation Kolmogorov-Arnold Networks在GH4698合金热变形流变应力曲线预测中的应用

Journal of Materials Engineering and Performance

IF2

2025-11-01

PREAI

Li, Fei-Fan; Zhu, Jihong; Zhang, Weihong; Wen, Shifeng

Gear-unit-based metamaterial integrating multi-mode and continuously adjustable mechanical properties 基于齿轮单元的集成多模态和连续可调机械性能的超材料

Materials Today Communications

IF4.5

2025-10-20

PREAI

Hao Feng; Ji Hong Zhu; Yong Yang

Effect of pre-training on low cycle fatigue of NiTi pseudoelasticshape memory alloy wires 预训练对NiTi伪弹性形状记忆合金丝低周疲劳的影响

International Journal of Fatigue

IF6.8

2025-09-15

PREAI

Zihong Liu; Yahui Zhang; Jun Wang; Xiaojun Gu; Jihong Zhu; Weihong Zhang

A skeletal line-based printing path planning method for continuous fiber reinforced composite structures 一种基于骨架线的连续纤维增强复合材料结构打印路径规划方法

Additive Manufacturing

IF11.1

2025-09-05

PREAI

Yamin Li; Xiaobao Zhi; Xin Yan; Jiancheng Hao; Shangqin Yuan; Tong Gao; Jihong Zhu; Weihong Zhang

Vinyl Acetate-Enhanced Polyvinyl Chloride Gel with High Electroadhesion and Self-Heating-Tunability for Soft Robots in Freezing Environments 醋酸乙烯酯增强聚氯乙烯凝胶，具有高电粘附性和自加热可调性，适用于冷冻环境下的软体机器人

Advanced Science

IF14.1

2025-08-11

OAAI

Chang Wei; Junshi Zhang; Lei Liu; Han Yan; Kaijun Wang; Yuzheng He; Minchao Cui; Zicai Zhu; Jihong Zhu; Weihong Zhang; Zuankai Wang; Jian Lu

Uncertainty evaluation for wind tunnel test based on new flow field and balance models 基于新流场和平衡模型的风洞试验不确定性评估

Aerospace Science and Technology

IF5.8

2025-07-11

PREAI

Qiang Li; Dawei Liu; Jihong Zhu

Micro-plastic deformation behavior and life enhancement mechanism of additively manufactured Ti-6Al-4V titanium alloy during high cycle fatigue 增材制造Ti-6Al-4V钛合金在高周疲劳过程中的微塑性变形行为与寿命提升机制

International Journal of Fatigue

IF6.8

2025-07-11

PREAI

Haizhou Li; Yaofu Wang; Jihong Zhu; Yan Liu; Qingyuan Wang; Yong Chen; Hui Chen

A Novel Shape Memory Alloy Curved Strip Actuator: Enhancing the Bending Actuation by SME-Activated Cross-Sectional Curvature Transition 一种新型形状记忆合金弯曲条状执行器：通过SME激活的横截面曲率转变增强弯曲驱动

Thin-Walled Structures

IF6.6

2025-07-04

PREAI

Jiahao Xi; Yahui Zhang; Xiaojun Gu; Jun Wang; Ziad Moumni; Jihong Zhu; Weihong Zhang

Topology design of additively manufactured CFRP for impact resistance via B-spline-based equivalent static load method 基于B样条等效静载荷法的增材制造CFRP抗冲击拓扑设计

COMPOSITES PART B-ENGINEERING

IF14.2

2025-06-03

PREAI

Zhi, Xiaobao; Yuan, Shangqin; Xu, Shijie; Zhao, Zhonghao; Li, Chenyang; Li, Yamin; Zhu, Jihong; Zhang, Weihong

Experiments and simulations on the impact resistance of superelastic shape memory alloy reinforced composites 超弹性形状记忆合金增强复合材料抗冲击性能的实验与模拟

THIN-WALLED STRUCTURES

IF6.6

2025-05-01

PREAI

Wang, Liangdi; Wang, Jun; Xu, Yingjie; Liu, Yanlong; Teng, Xuebei; Zhu, Jihong; Zhang, Weihong

Variable stiffness design optimization of fiber-reinforced composite laminates with regular and irregular holes considering fiber continuity for additive manufacturing

CHINESE JOURNAL OF AERONAUTICS

IF5.7

2025-03-01

OAAI

Liu, Yi; Duan, Zunyi; Zhou, Chunping; Si, Yuan; Guan, Chenxi; Xiong, Yi; Xu, Bin; Yan, Jun; Zhu, Jihong

Combined anisotropic and cyclic constitutive model for laser powder bed fusion fabricated aluminum alloy 激光粉末床熔融制备铝合金的各向异性和循环组合本构模型

CHINESE JOURNAL OF AERONAUTICS

IF5.7

2025-01-01

OAAI

Li, Fei-Fan; Zhu, Jihong; Zhang, Weihong; Wen, Shifeng; Song, Jingwen; Ma, Jun; Fang, Gang

A mapping-based graded infill structure design method and continuous printing path planning 基于映射的分级填充结构设计方法及连续打印路径规划

ADDITIVE MANUFACTURING

IF11.1

2025-01-01

PREAI

Li, YM; Shi, CY; Wang, XY; Yuan, SQ; Zhu, JH; Zhang, WH

研究方向