Vijay Hiwarkar - Publications, H-index & Citations

Vijay Hiwarkar

high energy materials research laboratory (hemrl)

17H指数

68论文数

840被引数

收录论文 25

发表时间

Effect of heat treatment on microstructure and tribological performance of additively manufactured Ti-6Al-4V ELI alloy: Role of precipitate 热处理对增材制造Ti-6Al-4V ELI合金微观结构和摩擦学性能的影响：析出物的作用

Materials Chemistry and Physics

IF4.7

2026-04-02

PREAI

M.D. Pawar; V.D. Hiwarkar

Cyclic deformation and low-cycle fatigue life prediction of stress-relieved LPBF AlSi10Mg via strain-based models 应力消除LPBF AlSi10Mg的循环变形及低周疲劳寿命的应变基模型预测

Journal of Alloys and Compounds

IF6.3

2026-03-03

PREAI

Anil Kumar Ramavajjala; R.N. Chouhan; Sushil K. Mishra; Vijay Hiwarkar; C.A. Joshi; A. Agnihotri; Rajesh K. Khatirkar

Effect of Weld Parameters on Porosity Reduction in Laser Beam-Welded AlSi10Mg Parts Made by Additive Manufacturing 激光束焊接增材制造AlSi10Mg零件中焊接参数对气孔率降低的影响

Transactions of the Indian Institute of Metals

IF1.6

2026-01-02

PREAI

Vishwakarma, Ajay Kumar; Pawar, Makarand; Debnath, Dibyendu; Hiwarkar, Vijay D.; Shekhar, Himanshu; Praveen Kumar, B.; Ghose, Bikash

Electrochemical Behavior of Artificial Saliva on LPBF-Built Heat-Treated Ti6Al4V Titanium Alloy 人工唾液对LPBF构建的热处理Ti6Al4V钛合金的电化学行为

Journal of Materials Engineering and Performance

IF2

2025-11-01

PREAI

Patil, Shreya; Nichul, Unissa; Hiwarkar, Vijay

Effect of Heat Treatment on Mechanical and Corrosion Behavior of Aluminum Alloy-Reinforced Intermetallic Carbides 热处理对铝基增强金属间化合物碳化物的力学和腐蚀行为的影响

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

IF2

2025-09-01

PREAI

Trinath, Keerthipalli; Aepuru, Radhamanohar; Nichul, Unissa; Hiwarkar, Vijay; Kumar, Mechiri Sandeep; Kumar, M. D. Barath; Sathiyamurthy, S.

Electrochemical performance of heat-treated beta titanium alloy in artificial saliva: Key role of grain size

MATERIALS TODAY COMMUNICATIONS

IF4.5

2023-12-01

PREAI

Nichul, Unissa; Kumar, Viresh; Hiwarkar, Vijay

Carbon dot complimentary green corrosion inhibitor for crystallographically textured Beta C titanium alloy for marine application: A state of art

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2023-11-01

PREAI

Nichul, Unissa; Hiwarkar, Vijay

Development of microstructure and high hardness of Ti6Al4V alloy fabricated using laser beam powder bed fusion: A novel sub-transus heat treatment approach

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2023-03-01

PREAI

Kaoushik, V. M.; Nichul, Unissa; Chavan, Vikram; Hiwarkar, Vijay

Development of Optimized Mechanical Properties of AISI 4340 Steel: Role of Quenching and Partitioning Process 开发AISI 4340钢的优化机械性能: 淬火和分配过程的作用

METALS AND MATERIALS INTERNATIONAL

IF4

2023-02-18

PREAI

Tikhe, Omkar; Doiphode, Pravin; Nichul, Unissa; Singh, Rajkumar; Hiwarkar, Vijay

Evolution of equiaxed α/β microstructure of annealed SLM-built Ti64: role of TiB2

PROGRESS IN ADDITIVE MANUFACTURING

IF5.4

2022-11-21

PREAI

Nichul, Unissa; Warghane, Sameer; Kumar, Pawan; Verma, Pankaj; Khatirkar, Rajesh; Hiwarkar, Vijay

Influence of SiC particles and post-heat treatment on the properties of Ti-6Al-4V-based surface nanocomposite fabricated by friction stir processing

SURFACE & COATINGS TECHNOLOGY

IF6.1

2022-11-01

PREAI

Deore, H. A.; Nichul, Unissa; Rao, A. G.; Hiwarkar, V. D.

Microstructural investigation of WC reinforced Ti-6Al-4V matrix surface composite fabricated via additive friction stir processing

MATERIALIA

IF2.9

2021-12-01

PREAI

Deore, H. A.; Nichul, Unissa; Rao, A. G.; Hiwarkar, V. D.

Cold compression behavior on the evolution of microstructure and texture in Beta C titanium alloy

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2021-12-01

PREAI

Nichul, Unissa; Khatirkar, Rajesh; Dhole, Ashish; Hiwarkar, Vijay

Utilizing Additive Friction Stir Processing to Fabricate B4C Reinforced Ti-6Al-4V Matrix Surface Composite: Microstructure Refinement and Enhancement in Mechanical Properties

METALS AND MATERIALS INTERNATIONAL

IF4

2021-11-11

PREAI

Deore, H. A.; Mishra, J.; Rao, A. G.; Bhanushali, B. D.; Hiwarkar, V. D.

Effect of boron addition on microstructure, hardness and wear performance of Ti-6Al-4 V alloy manufactured by laser powder bed fusion additive manufacturing

MATERIALS CHARACTERIZATION

IF5.5

2021-02-01

PREAI

Verma, Pankaj Kumar; Warghane, Sameer; Nichul, Unissa; Kumar, Pawan; Dhole, Ashish; Hiwarkar, Vijay

Microstructure and mechanical properties of friction welded carbon steel (EN24) and nickel-based superalloy (IN718)

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS

IF7.2

2021-01-18

PREAI

Gaikwad, V. T.; Mishra, M. K.; Hiwarkar, V. D.; Singh, R. K. P.

Consequence of reinforced SiC particles and post process artificial ageing on microstructure and mechanical properties of friction stir processed AA7075

DEFENCE TECHNOLOGY

IF5.9

2020-10-01

OAAI

Deore, H. A.; Bhardwaj, A.; Rao, A. G.; Mishra, J.; Hiwarkar, V. D.

Effect of filler material and post process ageing treatment on microstructure, mechanical properties and wear behaviour of friction stir processed AA 7075 surface composites

SURFACE & COATINGS TECHNOLOGY

IF6.1

2019-09-01

PREAI

Deore, H. A.; Mishra, J.; Rao, A. G.; Mehtani, H.; Hiwarkar, V. D.

Effect of TiB2 addition on the microstructure and wear resistance of Ti-6Al-4V alloy fabricated through direct metal laser sintering (DMLS)

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2019-03-01

PREAI

Patil, Aniruddha S.; Hiwarkar, Vijay D.; Verma, Pankaj K.; Khatirkar, Rajesh K.

Orientation-dependent plastic deformation in transformer steel: Experiments and dislocation dynamics simulations

ACTA MATERIALIA

IF9.3

2015-02-01

PREAI

Shekhawat, S. K.; Chakrabarty, R.; Basavaraj, V.; Hiwarkar, V. D.; Mani, K. V.; Guruprasad, P. J.; Benzerga, A. A.; Suresh, K. G.; Samajdar, I.

研究方向