logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
C

Charles W. Siyasiya

university of pretoria

11H指数
125论文数
632被引数
收录论文 20
发表时间
logo
Roll Bonding of Aluminium Coupons Using the Established Fully Fledged Offline Fabrication Facilities利用成熟的离线制造设备进行铝试件的滚压焊接
errJournal of Manufacturing and Materials Processing
IF3.3
err2026-06-08
err0
errOAAI
errJoseph Moema; Charles Siyasiya; Veronica Morudu; Maje Phasha; Mbavhalelo Maumela
err分享
err收藏
Machine learning-enhanced constitutive modeling and hot deformation behaviour of Ti-stabilized AISI 321 austenitic stainless steel机器学习增强的本构建模及Ti稳定型AISI 321奥氏体不锈钢的热变形行为
errNext Materials
IF0
err2026-01-01
err0
PREAI
errNkhoma, Richard; Mwale, Vincent; Ngonda, Tiyamike; Siyasiya, Charles
err分享
err收藏
The Influence of Chloride Ion Concentration on the Product Layer of Ti Microalloy Steel Under Simulated Marine Atmospheric Conditions氯离子浓度对模拟海洋大气条件下Ti微合金钢产物层的影响
errMETALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
IF3.1
err2025-10-01
err0
PREAI
errHu, Jie; Wang, Chuang-wei; Siyasiya, Charles Witness; Tang, Zheng-hua
err分享
err收藏
Effects of phosphorus on the corrosion characteristics of weathering steel in industrial environments磷对工业环境中耐候钢腐蚀特性的影响
errJournal of Materials Science
IF3.9
err2025-09-16
err0
PREAI
errLe Gan; Yicong Lei; Yu Jiang; Charles W Siyasiya; Zhenghua Tang
err分享
err收藏
Engineering γ-TiAl alloys: The effects of Sn, Si and Mn on densification, microstructure, and mechanical properties工程 γ-tial合金: Sn，Si和Mn对致密化，微观结构和力学性能的影响
errINTERMETALLICS
IF4.8
err2025-06-01
err0
PREAI
errEllard, J. J. M.; Mathabathe, M. N.; Siyasiya, C. W.; Bolokang, A. S.; Vilane, V. N.; Rikhotso-Mbungela, R.; Mcduling, C.; Masete, S.
err分享
err收藏
The effect of hot corrosion on mechanical properties of the tin-doped titanium aluminide alloy热腐蚀对锡掺杂钛铝基合金力学性能的影响
errINTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
IF3.1
err2025-01-10
err1
errOAAI
errMagogodi, Steven; Mathabathe, Maria Ntsoaki; Rikhotso-Mbungela, Rirhandzu; Vilane, Velile; Siyasiya, Charles; Bolokang, Amogelang Sylvester
err分享
err收藏
Empirical modelling of 2205 DSS flow curves using strain-compensated Arrhenius rate-type constitutive model
errSCIENTIFIC REPORTS
IF3.9
err2024-09-28
err2
errOAAI
errGonya, Elvis M.; Siyasiya, Charles W.; Makhatha, Mamookho E.
err分享
err收藏
Vacuum melting of compressed powders and hot rolling of the as-cast Ti-48Al-2Nb-0.7Cr-0.3Si intermetallic alloy: Mechanical properties and microstructural analysis
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2023-09-01
err6
errOAAI
errEllard, J. J. M.; Mathabathe, M. N.; Siyasiya, C.; Bolokang, A. S.
err分享
err收藏
Study of rolling contact fatigue, rolling and sliding wear of class B wheel steels against R350HT and R260 rail steels under dry contact conditions using the twin disc setup
errTRIBOLOGY INTERNATIONAL
IF6.9
err2022-10-01
err24
PREAI
errLeso, Tshenolo Phinah; Siyasiya, Charles Witness; Mostert, Roelf Johannes; Moema, Joseph
err分享
err收藏
Effects of final rolling temperature and coiling temperature on precipitates and microstructure of high-strength low-alloy pipeline steel
errJOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
IF3.6
err2021-09-27
err9
PREAI
errWang, Ya-dong; Tang, Zheng-hua; Xiao, Su-fen; Siyasiya, Charles W.; Wei, Tao
err分享
err收藏
Shape memory properties and transformation temperature of Ti50-XVXPt50 alloy
errINTERMETALLICS
IF4.8
err2021-06-01
err3
errOAAI
errDaswa, P.; Chikosha, S.; Siyasiya, C. W.
err分享
err收藏
Irreversible loss of hot ductility following simulated primary cooling of a C-Mn steel to temperatures above the ferrite transformation temperature
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2021-04-01
err6
PREAI
errLekganyane, K. M.; Mostert, R. J.; Siyasiya, C. W.; Banks, K. M.
err分享
err收藏
The sigmoidal strain hardening behaviour of a metastable AISI 301LN austenitic stainless steel as a function of temperature
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2020-08-01
err12
PREAI
errMukarati, Tulani W.; Mostert, Roelf J.; Siyasiya, Charles W.
err分享
err收藏
Hot Deformation Characteristics and 3-D Processing Map of a High-Titanium Nb-Micro-alloyed Steel高钛铌微合金钢的热变形特性及三维加工图
errMATERIALS
IF3.2
err2020-03-25
err8
errOAAI
errQian, Pingping; Tang, Zhenghua; Wang, Li; Siyasiya, Charles W.
err分享
err收藏
Surface characterization of the cyclically oxidized γ-Ti-48Al-2Nb-0.7Cr alloy after nitridation氮化后循环氧化 γ-Ti-48Al-2Nb-0.7Cr合金的表面表征
errMATERIALS CHARACTERIZATION
IF5.5
err2019-08-01
err8
PREAI
errMathabathe, M. N.; Govender, G.; Siyasiya, C. W.; Mostert, R. J.; Bolokang, A. S.
err分享
err收藏
Structure-property orientation relationship of a γ/α2/Ti5Si3 in as-cast Ti-45Al-2Nb-0.7Cr-0.3Si intermetallic alloy
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2018-10-01
err21
PREAI
errMathabathe, M. N.; Bolokang, A. S.; Govender, G.; Mostert, R. J.; Siyasiya, C. W.
err分享
err收藏
The vacuum melted γ-TiAl (Nb, Cr, Si)-doped alloys and their cyclic oxidation properties
errVACUUM
IF3.9
err2018-08-01
err43
PREAI
errMathabathe, M. N.; Bolokang, A. S.; Govender, G.; Mostert, R. J.; Siyasiya, C. W.
err分享
err收藏
Phase transformation and microstructural control of the α-solidifying γ-Ti-45Al-2Nb-0.7Cr-0.3Si intermetallic alloy
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2018-08-01
err30
PREAI
errMathabathe, M. N.; Govender, S.; Bolokang, A. S.; Mostert, R. J.; Siyasiya, C. W.
err分享
err收藏
Hot workability of AISI 321 and AISI 304 austenitic stainless steels
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2014-05-01
err78
errOAAI
errNkhoma, Richard K. C.; Siyasiya, Charles W.; Stumpf, Waldo E.
err分享
err收藏
The influence of sulphur content on the static recrystallisation of cold worked low carbon aluminium-killed strip steels
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2008-10-01
err11
PREAI
errSiyasiya, C. W.; Stumpf, W. E.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
王丽 封面图
王丽 (Li Wang)
H 指数: 47 · 论文数: 401
T
Tao Wei
H 指数: 25 · 论文数: 228
A
A.S. Bolokang
H 指数: 20 · 论文数: 78
M
Mamookho Elizabeth Makhatha
H 指数: 18 · 论文数: 143
W
W.E. Stumpf
H 指数: 18 · 论文数: 84
查看更多