未登录

何

何福坡 (Fupo He)

guangdong university of technology邮箱:fphe@gdut.edu.cn

H指数:30

被引数:2,415

个人简介

任职于广东工业大学机电工程学院，讲师，副教授（2016）。博士（后），广东工业大学“青年百人计划”引进人才，广州市“珠江科技新星”入选者。2007年毕业于济南大学获学士学位，2013年毕业于华南理工大学获博士学位，2015年广州医科大学博士后流动站出站。主持国家自然科学基金青年基金项目、广州市科技计划项目“珠江科技新星”人才专项等。

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

Fabrication of bioactive calcium magnesium phosphate scaffolds with Diamond-type minimal surface architecture via ceramic stereolithography

通过陶瓷光固化立体打印制备具有金刚石型极小曲面结构的生物活性钙镁磷酸盐支架

Ceramics International

IF5.6

2026-09-110

PRE

3D-printed lithium-incorporated strontium calcium phosphate scaffolds as bone regenerative materials: Fabrication, physicochemical characterization, and in vitro biological evaluation

3D打印锂掺杂的锶钙磷酸盐支架作为骨再生材料：制备、物理化学表征及体外生物学评价

Journal of the Mechanical Behavior of Biomedical Materials

IF3.5

2026-05-220

PRE

Fabrication of bioceramic scaffolds with high mechanical strength and favorable cell responses through the combination of β-Ca3(PO4)2 and Mg2Sr(PO4)2

通过β-Ca3(PO4)2和Mg2Sr(PO4)2的组合制备具有高机械强度和良好细胞反应的生物陶瓷支架

Materials Today Communications

IF4.5

2025-09-050

PRE

Preparation, physicochemical characterization and cellular responses of 3D-printed calcium-magnesium-strontium phosphate bioceramic scaffolds for bone defect repair

3D打印钙镁锶磷酸盐生物陶瓷支架的制备、物理化学表征及细胞响应（用于骨缺损修复）

Ceramics International

IF5.6

2025-03-240

PRE

Effects of zinc silicate additive on the physicochemical properties and cellular behaviors of 3D-printed magnesium phosphate bioceramic scaffolds

BIOMEDICAL MATERIALS

IF3.7

2025-02-260

PRE

3D-Printed Biomimetic Ceramic Scaffolds with Photothermal/Chemodynamic Effects and Ionic Microenvironment for Preventing Tumor Recurrence and Promoting Vascularized Bone Reconstruction

3D打印的具有光热/化学动力学效应和离子微环境的仿生陶瓷支架，用于预防肿瘤复发和促进血管化骨重建

ADVANCED FUNCTIONAL MATERIALS

IF19

2025-01-280

PRE

Fabrication of 3D-printed Ca2Sr(PO4)2-based composite ceramic scaffolds as potential bone regenerative biomaterials

CERAMICS INTERNATIONAL

IF5.6

2024-11-010

PRE

Improving mechanical strength and osteo-stimulative capacity of 3D-printed magnesium phosphate ceramic scaffolds by magnesium silicate additives

CERAMICS INTERNATIONAL

IF5.6

2024-11-010

PRE

Promoting neurovascularized bone regeneration with a novel 3D printed inorganic-organic magnesium silicate/PLA composite scaffold

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES

IF8.5

2024-10-012

PRE

Improvement in mechanical strength and biological function of 3D-printed trimagnesium phosphate bioceramic scaffolds by incorporating strontium orthosilicate

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS

IF3.5

2024-09-011

PRE

Preparation and properties of porous calcium phosphate ceramic microspheres modified with magnesium phosphate surface coating for bone defect repair

磷酸镁表面涂层改性多孔磷酸钙陶瓷微球的制备及骨缺损修复性能研究

CERAMICS INTERNATIONAL

IF5.6

2024-03-015

PRE

In Situ-Sprayed Bioinspired Adhesive Conductive Hydrogels for Cavernous Nerve Repair

原位喷涂生物粘合剂导电水凝胶用于海绵状神经修复

ADVANCED MATERIALS

IF26.8

2024-02-167

PRE

3D printing and physicochemical and biological characterizations of gallium-containing magnesium/calcium phosphate ceramic scaffolds

CERAMICS INTERNATIONAL

IF5.6

2023-11-013

PRE

Preparation of lithium-containing magnesium phosphate-based composite ceramics having high compressive strength, osteostimulation and proangiogenic effects

BIOMEDICAL MATERIALS

IF3.7

2023-09-212

PRE

Fabrication of 3D printed Ca3Mg3(PO4)4-based bioceramic scaffolds with tailorable high mechanical strength and osteostimulation effect

COLLOIDS AND SURFACES B-BIOINTERFACES

IF5.6

2023-09-016

PRE

Fabrication of nanocrystalline magnesium phosphate-based composite bioceramics using magnesium-containing phosphate glass as sintering additives

CERAMICS INTERNATIONAL

IF5.6

2023-07-013

PRE

Enhancing osteoinduction and bone regeneration of biphasic calcium phosphate scaffold thought modulating the balance between pro-osteogenesis and anti-osteoclastogenesis by zinc doping

通过锌掺杂调节促成骨和抗破骨细胞生成之间的平衡，增强双相磷酸钙支架的骨诱导和骨再生

MATERIALS TODAY CHEMISTRY

IF6.7

2023-04-0112

PRE

3D-Printed Flat-Bone-Mimetic Bioceramic Scaffolds for Cranial Restoration

IF10.7

2023-01-017

OAAI

Upscaling Ultrafast High-Temperature Sintering (UHS) to consolidate large-sized and complex-shaped ceramics

放大超快高温烧结 (UHS) 以巩固大尺寸和复杂形状的陶瓷

SCRIPTA MATERIALIA

IF5.6

2022-12-0125

PRE

Fabrication of cancellous-bone-mimicking β-tricalcium phosphate bioceramic scaffolds with tunable architecture and mechanical strength by stereolithography 3D printing

通过立体光刻3D打印制造具有可调结构和机械强度的模拟松质骨的 β-磷酸三钙生物陶瓷支架

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2022-11-0132

PRE