logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
J

Jan Haubrich

institute for frontier material on earth and space

32H指数
138论文数
3.8K被引数
收录论文 51
发表时间
logo
Identification of a new intermetallic phase formed during additive manufacturing of AlCr4Mo1.5ScZr在AlCr4Mo1.5ScZr增材制造过程中形成的一种新型金属间化合物的鉴定
errScripta Materialia
IF5.6
err2026-09-08
err0
errOAAI
errChristoph Wielenberg; Joachim Gussone; Frederic Kreps; Peter-Philipp Bauer; Frank Palm; Jan Haubrich; Guillermo Requena
err分享
err收藏
The Technical Hypothesis of a Missile Engine Conversion and Upgrade for More Sustainable Orbital Deployments导弹发动机转换与升级的技术假说，以实现更可持续的轨道部署
errAEROSPACE
IF2.2
err2025-09-16
err0
errOAAI
errPrisacariu, Emilia-Georgiana; Dumitrescu, Oana; Battista, Francesco; Maligno, Angelo; Munk, Juri; Ricci, Daniele; Haubrich, Jan; Cardillo, Daniele
err分享
err收藏
Tailoring the strength of inconel 718: Insights into LPBF parameters and heat treatment synergy调控Inconel 718强度的研究：LPBF参数与热处理协同作用的见解
errMATERIALS & DESIGN
IF7.9
err2025-02-01
err0
errOAAI
errKasperovich, Galina; Gussone, Joachim; Requena, Guillermo; Schell, Norbert; Stark, Andreas; Haubrich, Jan
err分享
err收藏
Correlation between interlaminar shear strength of CFRP and joint strength of aluminium-CFRP hybrid jointsCFRP层间剪切强度与铝-CFRP混合接头接头强度之间的相关性
errJOURNAL OF ADHESION
IF2.3
err2025-01-08
err1
errOAAI
errShuang Wu; Alexander Delp; Jonathan Freund; Frank Walther; Jan Haubrich; Miriam Löbbecke; Thomas Tröster
err分享
err收藏
Static strength and fatigue life of pinned hybrid titanium-composite single-lap-shear joints
errCOMPOSITE STRUCTURES
IF7.1
err2025-01-01
err0
errOAAI
errKralovec, Christoph; Dengg, Andreas; Schagerl, Martin; Schiller, Arne; Bisagni, Chiara; Loebbecke, Miriam; Haubrich, Jan; Hanelt, Robert
err分享
err收藏
Investigation on the fatigue strength of AlSi10Mg fabricated by PBF-LB/M and subjected to low temperature heat treatmentsPbf-lb/M低温热处理AlSi10Mg乏力强度的研究
errMATERIALS & DESIGN
IF7.9
err2024-08-01
err2
errOAAI
errRoveda, Ilaria; Serrano-Munoz, Itziar; Haubrich, Jan; Requena, Guillermo; Madia, Mauro
err分享
err收藏
Damage monitoring of pinned hybrid composite-titanium joints using direct current electrical resistance measurement (vol 334, 117972, 2024)
errCOMPOSITE STRUCTURES
IF7.1
err2024-07-01
err0
PREAI
errDengg, Andreas; Kralovec, Christoph; Loebbecke, Miriam; Haubrich, Jan; Schagerl, Martin
err分享
err收藏
Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082 ∨ CFRP
errMATERIALS
IF3.2
err2024-04-19
err0
errOAAI
errDelp, Alexander; Wu, Shuang; Freund, Jonathan; Scholz, Ronja; Loebbecke, Miriam; Troester, Thomas; Haubrich, Jan; Walther, Frank
err分享
err收藏
Influence of post-process heat treatments on the fatigue crack propagation behaviour of a PBF-LB/M AlSi10Mg alloy后处理对pbf-lb/M AlSi10Mg合金乏力裂纹扩展行为的影响
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2023-10-01
err14
errOAAI
errRoveda, Ilaria; Serrano-Munoz, Itziar; Haubrich, Jan; Requena, Guillermo; Madia, Mauro
err分享
err收藏
Microstructure formation during laser powder bed fusion of Ti-22Al-25Nb with low and high pre-heating temperatures
errMATERIALS & DESIGN
IF7.9
err2023-08-01
err2
errOAAI
errGussone, Joachim; Rackel, Marcus Willi; Tumminello, Silvana; Barriobero-Vila, Pere; Kreps, Frederic; Kelm, Klemens; Stark, Andreas; Schell, Norbert; Pyczak, Florian; Haubrich, Jan; Requena, Guillermo
err分享
err收藏
Role of surface structures on long term stability of adhesive joints between Ti-15V-3Cr-3Sn-3Al and polyether-ether-ketone
errINTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
IF3.5
err2023-01-01
err9
PREAI
errLoebbecke, Miriam; Bayerbasi, Tolga J.; Bartsch, Marion; Haubrich, Jan
err分享
err收藏
Influence of a 265 °C heat treatment on the residual stress state of a PBF-LB/M AlSi10Mg alloy
errJOURNAL OF MATERIALS SCIENCE
IF3.9
err2022-12-08
err5
errOAAI
errRoveda, Ilaria; Serrano-Munoz, Itziar; Mishurova, Tatiana; Madia, Mauro; Pirling, Thilo; Evans, Alexander; Klaus, Manuela; Haubrich, Jan; Requena, Guillermo; Bruno, Giovanni
err分享
err收藏
The effect of weak boundary layers on adhesion properties of laser pretreated aluminum alloy EN-AW 6082 surfaces
errINTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
IF3.5
err2022-12-01
err8
PREAI
errIrfan, M.; Requena, G.; Haubrich, J.
err分享
err收藏
Influence of laser-generated surface micro-structuring on the intrinsically bonded hybrid system CFRP-EN AW 6082-T6 on its corrosion properties
errCOMPOSITE STRUCTURES
IF7.1
err2022-04-01
err3
errOAAI
errDelp, Alexander; Freund, Jonathan; Wu, Shuang; Scholz, Ronja; Loebbecke, Miriam; Haubrich, Jan; Troester, Thomas; Walther, Frank
err分享
err收藏
Interface-Mediated Twinning-Induced Plasticity in a Fine Hexagonal Microstructure Generated by Additive Manufacturing
errADVANCED MATERIALS
IF26.8
err2021-10-19
err22
errOAAI
errBarriobero-Vila, Pere; Vallejos, Juan Manuel; Gussone, Joachim; Haubrich, Jan; Kelm, Klemens; Stark, Andreas; Schell, Norbert; Requena, Guillermo
err分享
err收藏
The effect of build direction and geometric optimization in laser powder bed fusion of Inconel 718 structures with internal channels具有内部通道的Inconel 718结构的激光粉末床融合中的构建方向和几何优化的影响
errMATERIALS & DESIGN
IF7.9
err2021-09-01
err31
errOAAI
errKasperovich, Galina; Becker, Ralf; Artzt, Katia; Barriobero-Vila, Pere; Requena, Guillermo; Haubrich, Jan
err分享
err收藏
Separation of the impact of residual stress and microstructure on the fatigue performance of LPBF Ti-6Al-4V at elevated temperature
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2021-07-01
err40
PREAI
errMishurova, Tatiana; Artzt, Katia; Rehmer, Birgit; Haubrich, Jan; Avila, Luis; Schoenstein, Frederic; Serrano-Munoz, Itziar; Requena, Guillermo; Bruno, Giovanni
err分享
err收藏
In Situ High-Energy Synchrotron X-Ray Diffraction Reveals the Role of Texture on the Activation of Slip and Twinning during Deformation of Laser Powder Bed Fusion Ti-6Al-4V原位高能同步辐射x射线衍射揭示织构对激光粉末床聚变Ti-6Al-4V变形过程中滑移和孪晶活化的作用
errADVANCED ENGINEERING MATERIALS
IF3.3
err2021-05-02
err9
errOAAI
errVallejos, Juan Manuel; Barriobero-Vila, Pere; Gussone, Joachim; Haubrich, Jan; Kelm, Klemens; Stark, Andreas; Schell, Norbert; Requena, Guillermo
err分享
err收藏
Pyrometric-Based Melt Pool Monitoring Study of CuCr1Zr Processed Using L-PBF
errMATERIALS
IF3.2
err2020-10-16
err15
errOAAI
errArtzt, Katia; Siggel, Martin; Kleinert, Jan; Riccius, Joerg; Requena, Guillermo; Haubrich, Jan
err分享
err收藏
Ultrafine eutectic Ti-Fe-based alloys processed by additive manufacturing - A new candidate for high temperature applications通过增材制造加工的超细共晶ti-fe基合金-高温应用的新候选
errAPPLIED MATERIALS TODAY
IF6.9
err2020-09-01
err41
errOAAI
errGussone, Joachim; Bugelnig, Katrin; Barriobero-Vila, Pere; da Silva, Julio Cesar; Hecht, Ulrike; Dresbach, Christian; Sket, Federico; Cloetens, Peter; Stark, Andreas; Schell, Norbert; Haubrich, Jan; Requena, Guillermo
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
D
Dierk Raabe
H 指数: 178 · 论文数: 2.3K
E
Efthimios Kaxiras
H 指数: 106 · 论文数: 934
刘
刘志 (Zhi Liu)
H 指数: 89 · 论文数: 1.1K
P
Philippe Sautet
H 指数: 87 · 论文数: 722
R
R. J. Madix
H 指数: 81 · 论文数: 1.0K
查看更多