logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
D

Dae-Cheol Ko

Pusan National University

27H指数
182论文数
2.8K被引数
收录论文 61
发表时间
logo
Process Design of Vinyl-Coated Metal Sheet Stamping for Prevention of Delamination and Wrinkling by DNN-Based Multi-Objective Optimization基于DNN的多目标优化防止分层和起皱的聚氯乙烯涂层金属板冲压工艺设计
errMaterials
IF3.2
err2026-03-04
err0
errOAAI
errMin-Gi Kim; Jae-Chang Ryu; Chan-Joo Lee; Jin-Seok Jang; Dae-Cheol Ko
err分享
err收藏
Swing speed control for enhancing stability and reducing payload swing in a crawler crane控制履带起重机吊臂摆动速度以提高稳定性并减少负载摆动
errPROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART K-JOURNAL OF MULTI-BODY DYNAMICS
IF1.9
err2025-12-01
err0
PREAI
errJeong, Ji-Su; Kim, Byeong-Hak; Won, Hong-In; Ko, Dae-Cheol; Jang, Jin-Seok
err分享
err收藏
Structural Evaluation of Steel/CFRP Hybrid Part Using Progressive Damage Model and Cohesive Zone Model基于渐进损伤模型和内聚区模型对钢/CFRP复合部件的结构性能评估
errMaterials
IF3.2
err2025-11-28
err0
errOAAI
errJae-Chang Ryu; Min-Gi Kim; Joon-Young Seo; Chan-Joo Lee; Do-Hoon Shin; Dae-Cheol Ko
err分享
err收藏
Multi-Objective Optimization Using Deep Neural Network and Grey Relational Analysis for Optimal Lay-Up of CFRP Structure基于深度神经网络和灰色关联分析的CFRP结构最优铺层多目标优化
errMaterials 2025, Vol. 18, Page 5104
IF3.2
err2025-11-10
err0
errOAAI
errMin-Gi Kim; Jae-Chang Ryu; Chan-Joo Lee; Jin-Seok Jang; Do-Hoon Shin; Dae-Cheol Ko
err分享
err收藏
Integrated Analysis of Spheroidal Graphite Cast Iron by Taguchi Design, Principal Component Analysis, and Cluster-Based Methods基于田口设计、主成分分析和聚类方法的球墨铸铁综合分析
errInternational Journal of Metalcasting
IF2.5
err2025-09-13
err0
PREAI
errJinsu Ha; Jiwoo Hong; Jiwook Kim; Changyoung Choi; Jinseok Jang; Daecheol Ko; Yongjae Cho
err分享
err收藏
Evaluation of Artificial Sand Replacement for Enhancing Molding Sand Properties and Casting Surface Quality人工砂替代对提高型砂性能和铸件表面质量的评估
errINTERNATIONAL JOURNAL OF METALCASTING
IF2.5
err2025-05-13
err0
PREAI
errHa, Jinsu; Choi, Changyoung; Cho, Yongjae; Ko, Daecheol; Jang, Jinseok
err分享
err收藏
Prediction of the Interface Behavior of a Steel/CFRP Hybrid Part Manufactured by Stamping
errMATERIALS
IF3.2
err2024-08-30
err1
errOAAI
errRyu, Jae-Chang; Lee, Chan-Joo; Shin, Do-Hoon; Ko, Dae-Cheol
err分享
err收藏
Multi-Load Topology Optimization Design for the Structural Safety Maintenance of Low- and Intermediate-Level Radioactive Waste Packaging Containers in the Case of a Collision
errMATERIALS
IF3.2
err2024-08-20
err0
errOAAI
errLee, Jeong-In; Park, Sang-Wook; Song, Hye-Jin; Cho, Yong-Jae; Kim, Dong-Hwan; Ko, Dae-Cheol; Jang, Jin-Seok
err分享
err收藏
A Methodological Approach for Motor Selection in Dental Impression Material Dispensers Using Experimental and Image Analysis Techniques
errMATERIALS
IF3.2
err2024-03-22
err0
errOAAI
errHwang, Ji-Min; Park, Sang-Wook; Jeong, Ji-Su; Kim, Ji-Wook; Ko, Dae-Cheol; Jang, Jin-Seok
err分享
err收藏
Spring-In Prediction of CFRP Part Using Coupled Analysis of Forming and Cooling Processes in Stamping
errMATERIALS
IF3.2
err2024-02-28
err1
errOAAI
errRyu, Jae-Chang; Lee, Chan-Joo; Jang, Jin-Seok; Ko, Dae-Cheol
err分享
err收藏
The Effect of Boron (B) and Copper (Cu) on the Microstructure and Graphite Morphology of Spheroidal Graphite Cast Iron硼 (B) 和铜 (Cu) 对球墨铸铁组织和石墨形态的影响
errMATERIALS
IF3.2
err2023-06-07
err5
errOAAI
errHa, Jin-Su; Hong, Ji-Woo; Kim, Ji-Wook; Han, Soo-Bin; Choi, Chang-Young; Song, Hye-Jin; Jang, Jin-Seok; Kim, Dong-Yul; Ko, Dae-Cheol; Yi, Seong-Hoon; Cho, Yong-Jae
err分享
err收藏
Prediction of Extrusion Machine Stem Fatigue Life Using Structural and Fatigue Analysis
errMATERIALS
IF3.2
err2023-04-18
err0
errOAAI
errKim, Dong-Yul; Kim, Ji-Wook; Ha, Jin-Su; Jo, A-Ra; Lee, Sung-Yun; Jeong, Myeong-Sik; Ko, Dae-Cheol; Jang, Jin-Seok
err分享
err收藏
Facet Connectivity-Based Estimation Algorithm for Manufacturability of Supportless Parts Fabricated via LPBF
errMATERIALS
IF3.2
err2023-01-24
err0
errOAAI
errLee, Seung-Yeop; Lee, Jae-Wook; Yang, Min-Seok; Kim, Da-Hye; Jung, Hyun-Gug; Ko, Dae-Cheol; Kim, Kun-Woo
err分享
err收藏
Influence of the surface flaws in oil-tempered wires on the fatigue life of automotive engine valve springs
errSCIENTIFIC REPORTS
IF3.9
err2022-12-07
err2
errOAAI
errKo, Dae-Cheol; Ahn, Nam-Sik; Lee, Kyung-Hun
err分享
err收藏
Approximation Model Development and Dynamic Characteristic Analysis Based on Spindle Position of Machining Center
errMATERIALS
IF3.2
err2022-10-14
err0
errOAAI
errKim, Ji-Wook; Kim, Dong-Yul; Won, Hong-In; Noh, Yoo-Jeong; Ko, Dae-Cheol; Jang, Jin-Seok
err分享
err收藏
Design of an Intermediate Die for the Multi-Pass Shape Drawing Process
errMATERIALS
IF3.2
err2022-10-04
err1
errOAAI
errKim, Jeong-Hun; Park, Jeong-Hyun; Lee, Kwang-Seok; Ko, Dae-Cheol; Lee, Kyung-Hun
err分享
err收藏
Novel Approach toward the Forming Process of CFRP Reinforcement with a Hot Stamped Part by Prepreg Compression Molding通过预浸压缩成型的热冲压件CFRP增强件成型工艺的新方法
errMATERIALS
IF3.2
err2022-07-06
err10
errOAAI
errKim, Jae-Hong; Jung, Yong-Hun; Lambiase, Francesco; Moon, Young-Hoon; Ko, Dae-Cheol
err分享
err收藏
Feasibility of one-shot forming for manufacturing of steel/CFRP hybrid B-pillar
errMATERIALS AND MANUFACTURING PROCESSES
IF4.7
err2022-02-16
err3
PREAI
errRyu, Jae-Chang; Kim, Jae-Hong; Kam, Dong-Hyuck; Ko, Dae-Cheol
err分享
err收藏
A Study on the Mechanical Properties of an Automobile Part Additively Printed through Periodic Layer Rotation Strategies
errMATERIALS
IF3.2
err2021-12-22
err3
errOAAI
errYang, Min-Seok; Kang, Ji-Heon; Kim, Ji-Wook; Kim, Kun-Woo; Kim, Da-Hye; Sung, Ji-Hyun; Ko, Dae-Cheol; Lee, Jae-Wook
err分享
err收藏
Prediction of the Delamination at the Steel and CFRP Interface of Hybrid Composite Part
errMATERIALS
IF3.2
err2021-10-21
err6
errOAAI
errPark, Jun-Su; Kim, Jae-Hong; Park, Joon-Hong; Ko, Dae-Cheol
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
D
Dong‐Hwan Kim
H 指数: 59 · 论文数: 459
G
Gary S.P. Cheung
H 指数: 58 · 论文数: 141
F
Francesco Lambiase
H 指数: 42 · 论文数: 128
刘
刘福春 (F.C. Liu)
H 指数: 40 · 论文数: 143
J
Jae‐Myung Lee
H 指数: 39 · 论文数: 477
查看更多