Antonio Blázquez

University of Sevilla

22H指数

181论文数

1.3K被引数

收录论文 35

发表时间

Influence of the bonding method on interlaminar fracture toughness for composite material non-symmetric configurations

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

IF3.5

2025-02-01

PREAI

Canas, J.; Justo, J.; Blazquez, A.; Velasco, M. L.

Characterization by fracture mechanics of intra and interlaminar damage in composite laminates 利用断裂力学对复合材料层合板内层间和层内损伤的表征

ENGINEERING FRACTURE MECHANICS

IF5.3

2025-02-01

PREAI

Blazquez, Antonio; Luisa Velasco, Maria; Caballos, Paula; Paris, Federico

Closed-form methodology for the structural analysis of stiffened composite plates with cutouts and non-uniform lay-up

COMPOSITE STRUCTURES

IF7.1

2024-09-01

OAAI

Blazquez, A.; Pastorino, D.; Lopez-Romano, B.; Paris, F.

Accurate determination of the stiffness properties for an elastic interface under peeling conditions between homogeneous materials

COMPOSITE STRUCTURES

IF7.1

2022-04-01

PREAI

Canas, J.; Blazquez, A.; Estefani, A.; Tavara, L.

Closed-form methodology for the bending of symmetric composite plates with cutouts and non-uniform lay-up

COMPOSITE STRUCTURES

IF7.1

2021-09-01

OAAI

Pastorino, D.; Blazquez, A.; Lopez-Romano, B.; Paris, F.

Review of recent developments and induced damage assessment in the modelling of the machining of long fibre reinforced polymer composites

COMPOSITE STRUCTURES

IF7.1

2020-05-01

PREAI

Cepero-Mejias, F.; Curiel-Sosa, J. L.; Blazquez, A.; Yu, T. T.; Kerrigan, K.; Phadnis, V. A.

On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM

THEORETICAL AND APPLIED FRACTURE MECHANICS

IF5.6

2019-04-01

OAAI

Tavara, L.; Reinoso, J.; Blazquez, A.; Mantic, V

Closed-form methodology for stress analysis of composite plates with cutouts and non-uniform lay-up

COMPOSITE STRUCTURES

IF7.1

2019-03-01

OAAI

Pastorino, D.; Blazquez, A.; Lopez-Romano, B.; Paris, F.

A new in situ peeling test for the characterisation of composite bonded joints

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2018-10-01

PREAI

Canas, J.; Tavara, L.; Blazquez, A.; Estefani, A.; Santacruz, G.

Surface-based and solid shell formulations of the 7-parameter shell model for layered CFRP and functionally graded power-based composite structures

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES

IF0

2018-02-22

PREAI

Reinoso, J.; Paggi, M.; Areias, P.; Blazquez, A.

A consistent anisotropic damage model for laminated fiber-reinforced composites using the 3D-version of the Puck failure criterion

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2017-11-01

OAAI

Reinoso, J.; Catalanotti, G.; Blazquez, A.; Areias, P.; Camanho, P. P.; Paris, F.

Role of the filler on Portland cement hydration at very early ages: Rheological behaviour of their fresh cement pastes

CONSTRUCTION AND BUILDING MATERIALS

IF8

2017-10-01

OAAI

Talero, R.; Pedrajas, C.; Gonzalez, M.; Aramburo, C.; Blazquez, A.; Rahhal, V.

Experimental failure investigation of pull-off tests of single T-stiffened composite specimens

COMPOSITE STRUCTURES

IF7.1

2017-10-01

PREAI

Justo, J.; Reinoso, J.; Blazquez, A.

Sulfate Resistance in OPC and SRPC Containing Calcined Paper Sludge Waste: Ettringite or Thaumasite Formation 含有煅烧造纸污泥废物的OPC和SRPC的抗硫酸盐性: 钙矾石或硫矾石的形成

JOURNAL OF MATERIALS IN CIVIL ENGINEERING

IF3

2017-02-01

OAAI

Talero, Rafael; Aramburo, Carlos; Gonzalez, Mariano; Sanchez de Rojas, M. I.; Blazquez, Antonio; Frias, Moises; Pedrajas, Cesar

A nonlinear finite thickness cohesive interface element for modeling delamination in fibre-reinforced composite laminates

COMPOSITES PART B-ENGINEERING

IF14.2

2017-01-01

PREAI

Reinoso, J.; Paggi, M.; Blazquez, A.

Geometrically nonlinear analysis of functionally graded power-based and carbon nanotubes reinforced composites using a fully integrated solid shell element 使用完全集成的固体壳单元对功能梯度的power-based和碳纳米管增强复合材料进行几何非线性分析

COMPOSITE STRUCTURES

IF7.1

2016-09-01

PREAI

Reinoso, J.; Blazquez, A.

Damage tolerance of composite runout panels under tensile loading

COMPOSITES PART B-ENGINEERING

IF14.2

2016-07-01

PREAI

Reinoso, J.; Blazquez, A.; Tavara, L.; Paris, F.; Arellano, C.

A new analytical model for evaluating interlaminar stresses in the unfolding failure of composite laminates

COMPOSITE STRUCTURES

IF7.1

2016-07-01

PREAI

Gonzalez-Cantero, J. M.; Graciani, E.; Blazquez, A.; Paris, F.

Application and finite element implementation of 7-parameter shell element for geometrically nonlinear analysis of layered CFRP composites

COMPOSITE STRUCTURES

IF7.1

2016-04-01

PREAI

Reinoso, J.; Blazquez, A.

Transverse crack onset and growth in cross-ply [0/90]s laminates under tension. Application of a coupled stress and energy criterion

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2014-11-01

OAAI

Garcia, I. G.; Mantic, V.; Blazquez, A.; Paris, F.

研究方向