C.H. Zhang - Publications, H-index & Citations

C.H. Zhang

Shenyang University of Technology

38H指数

69论文数

3.6K被引数

收录论文 43

发表时间

Effect of TiC ceramic particles size on microstructure and tribo-corrosion behavior of FeCoCrNiTi high-entropy alloy coatings by laser cladding TiC陶瓷颗粒尺寸对激光熔覆FeCoCrNiTi高熵合金涂层微观结构和摩擦腐蚀行为的影响

surface coatings technology

IF0

2025-09-03

PREAI

K.X. Zheng; C.L. Wu; J.L. Liu; D.T. Yu; S. Zhang; C.H. Zhang; Q. Wang; Dan Zhang

Coarsening Behavior of L12-Ni3Al Precipitates in Alumina-Forming Austenitic Steel L12-Ni3Al析出物的粗化行为在形成氧化铝的奥氏体钢中

acta metallurgica sinica english letters

IF0

2025-08-21

PREAI

Shaoqiang Ren; Qingshuang Ma; Chengxian Zhang; Liming Yu; Huijun Li; Hongtao Zhu; Qiuzhi Gao

Shear failure analysis of ultra-high performance concrete (UHPC) beams: A theoretical method considering various shear mechanisms 超高性能混凝土（UHPC）梁的剪切破坏分析：考虑多种剪切机制的数值方法

Engineering Failure Analysis

IF5.7

2025-07-25

PREAI

Zhaoyao Wang; Xingwen Liang; Siyu Wan; Chihengyi Zhang; Shiqiang Weng; Kui Wu

Laser cladding of FeCoCrNiTi high-entropy alloy coatings to modulate the microstructure and enhance the tribo-corrosion behavior on 304 stainless steel 采用激光熔覆FeCoCrNiTi高熵合金涂层以调控微观结构并增强304不锈钢的摩擦腐蚀行为

SURFACE & COATINGS TECHNOLOGY

IF6.1

2025-06-01

PREAI

Zheng, K. X.; Yu, D. T.; Liu, J. L.; Wu, C. L.; Zhang, S.; Zhang, C. H.; Wang, Q.

Microstructure evolution, corrosion and corrosive wear properties of NbC-reinforced FeNiCoCr-based high entropy alloys coatings fabricated by laser cladding NbC增强FeNiCoCr基高熵合金涂层在激光熔覆制备过程中的微观结构演变、腐蚀及腐蚀磨损性能

ENGINEERING FAILURE ANALYSIS

IF5.7

2025-04-01

PREAI

Wu, H.; Wang, Z. Y.; Wang, M. S.; Wang, R.; Zhang, S.; Zhang, C. H.; Wu, C. L.; Chen, H. T.; Chen, J.

In-situ synthesized (Ti,Nb)C reinforced austenitic stainless steel by laser cladding: New insights into microstructure evolution and corrosion behavior

MATERIALS TODAY COMMUNICATIONS

IF4.5

2025-02-01

PREAI

Zhang, H. F.; Wu, H.; Wang, Z. Y.; Wang, R.; Zhang, S.; Zhang, C. H.; Wu, C. L.; Chen, J.; Chen, H. T.

Design, microstructure, wear and corrosion behaviors of laser clad FeNiCoCrMo0.3Nbx hypoeutectic high entropy alloys coatings 激光熔覆FeNiCoCrMo0.3Nbx亚共晶高熵合金涂层的设计、组织及磨损腐蚀行为

MATERIALS CHARACTERIZATION

IF5.5

2024-10-01

PREAI

Wu, H.; Zhang, S.; Zhang, H. F.; Wang, R.; Wu, C. L.; Zhang, C. H.; Chen, J.

Effect of solid solution heat treatment duration on microstructure evolution and the high temperature and low stress creep properties of a low-cost fourth-generation single crystal superalloy

MATERIALS CHARACTERIZATION

IF5.5

2024-09-01

PREAI

Liang, Z. Y.; Wang, X. G.; Tan, Z. H.; Jafri, S. M. Abbas; Tao, X. P.; Yang, Y. H.; Liu, J. D.; Liu, J. L.; Zhang, C. H.; Zhang, S.; Li, J. G.; Zhou, Y. Z.; Sun, X. F.

Effects of heat treatment on the nano-indentation, corrosion and cavitation erosion behavior of 17-4PH stainless steel by laser surface melting

SURFACE & COATINGS TECHNOLOGY

IF6.1

2024-05-01

PREAI

Yu, D. T.; Wu, C. L.; Zhang, S.; Zhang, C. H.; Chen, H. T.; Tao, X. P.

Microstructure, tribological property and high temperature tensile property of Co-Cr-Ni-W alloy parts fabricated by laser directed energy deposition 激光定向能量沉积co-cr-ni-w合金零件的组织、摩擦学性能及高温拉伸性能

SURFACE & COATINGS TECHNOLOGY

IF6.1

2024-05-01

PREAI

Huang, Y. C.; Wu, H.; Xu, T. Z.; Wang, R.; Zhang, S.; Zhang, C. H.; Wu, C. L.; Chen, H. T.

Exploration of wear and slurry erosion mechanisms of laser clad CoCrFeNi plus x (NbC) high entropy alloys composite coatings

TRIBOLOGY INTERNATIONAL

IF6.9

2024-05-01

PREAI

Wu, H.; Zhang, S.; Zhang, H. Y.; Wang, R.; Zhang, H. F.; Zhang, C. H.; Wu, C. L.; Chen, H. T.

An investigation on the effect of heat input to wear behavior and corrosion-cavitation erosion mechanism of Hastelloy C-276 coating by cold metal transfer

MATERIALS CHARACTERIZATION

IF5.5

2024-04-01

PREAI

Zhao, T.; Wang, R.; Zhang, H. F.; Zhang, C. H.; Zhang, S.; Chen, H. T.; Wu, C. L.

Variety of yield strength caused by precipitations of L12-Ni3Al and B2-NiAl phases in alumina-forming austenitic steel 由氧化铝形成的奥氏体钢中L12-Ni3Al相和B2-NiAl相的析出引起的屈服强度变化

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2024-03-01

PREAI

Zhang, Chengxian; Gao, Qiuzhi; Ma, Qingshuang; Ren, Shaoqiang; Zhang, Hailian; Bai, Jing; Li, Huijun

Near zero thermal performance loss of Al-Si microcapsules with fibers network embedded Al2O3/AlN shell

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

IF14.3

2024-03-01

PREAI

Zhang, J. X.; Zhang, M. J.; Li, H. F.; Gu, H. Z.; Chen, D.; Zhang, C. H.; Tian, Y. F.; Wang, E. J.; Mu, Q. N.

Mechanical properties and corrosion resistance of laser cladding iron-based coatings with two types of NbC reinforcement

SURFACE & COATINGS TECHNOLOGY

IF6.1

2024-03-01

PREAI

Zhang, H. F.; Zhang, S.; Wu, H.; Wang, R.; Zhang, C. H.; Wu, C. L.; Chen, J.; Chen, H. T.

Low cycle fatigue behavior and microstructure evolution of a fourth-generation single crystal superalloy at 800 °C 第四代单晶高温合金在800 °C下的低循环乏力行为和微观结构演变

MATERIALS CHARACTERIZATION

IF5.5

2023-11-01

PREAI

Liang, Z. Y.; Tan, Z. H.; Zhang, C. H.; Zhang, S.; Tao, X. P.; Wang, X. G.; Jafri, S. M. Abbas; Shi, Z. W.; Yang, Y. H.; Liu, J. D.; Liu, J. L.; Li, J. G.; Zhou, Y. Z.; Sun, X. F.

Influence of Ta plus Al on the microstructure evolution of two Ru-containing Ni-based single crystal superalloys deposited with γ′ plus β NiAl coating at extremely high temperature

SURFACE & COATINGS TECHNOLOGY

IF6.1

2023-11-01

PREAI

Ge, M. T.; Li, Y. M.; Tan, Z. H.; Tao, X. P.; Yang, Y. H.; Liu, J. D.; Liu, J. L.; Zou, M. K.; Zhang, C. H.; Zhang, S.; Wang, X. G.; Li, J. G.; Zhou, Y. Z.; Sun, X. F.

Effect of synergistic cavitation erosion-corrosion on cavitation damage of CoCrFeNiMn high entropy alloy layer by laser cladding 协同空蚀腐蚀对激光熔覆CoCrFeNiMn高熵合金层空蚀损伤的影响

SURFACE & COATINGS TECHNOLOGY

IF6.1

2023-11-01

PREAI

Zhao, T.; Wang, L.; Zhang, S.; Zhang, C. H.; Sun, X. Y.; Chen, H. T.; Bai, X. L.; Wu, C. L.

Tribological properties and sulfuric acid corrosion resistance of laser clad CoCrFeNi high entropy alloy coatings with different types of TiC reinforcement

TRIBOLOGY INTERNATIONAL

IF6.9

2023-10-01

PREAI

Wu, H.; Wang, L.; Zhang, S.; Wu, C. L.; Zhang, C. H.; Sun, X. Y.; Chen, J.