K.B. Katnam - Publications, H-index & Citations

K.B. Katnam

University of Manchester

21H指数

70论文数

2.2K被引数

收录论文 31

发表时间

Torsional damage behaviour of double-layer braided composite tubes with varying braid angles studied by in situ synchrotron X-ray Computed Tomography (CT)双层编织复合材料管在不同编织角度下的扭转损伤行为研究：基于原位同步辐射X射线计算机断层扫描（CT）

Composites Science and Technology

IF9.8

2026-09-21

OAAI

Dongze He; Jiduo Zhang; Mohammad Islam; Leonard Turpin; Jianguang Bao; Zihan Song; Valeriy Titarenko; Kali Babu Katnam; Prasad Potluri; Philip J. Withers

Torsional damage behaviour of multilayer braided CFRP tubes observed by time-resolved in situ synchrotron X-ray CT 多层编织CFRP管扭转损伤行为的原位同步加速器X射线CT时间分辨观察

Composites Part B-Engineering

IF14.2

2026-08-10

OAAI

Dongze He; Jiduo Zhang; Mohammad Islam; Leonard Turpin; Zihan Song; Valeriy Titarenko; Kali Babu Katnam; Prasad Potluri; Philip J. Withers

Effect of fibre hybridization on interfacial micro-stress fields using 3D RVEs 纤维混杂对界面微观应力场的影响（基于三维 Representative Volume Element）

Composites Part C: Open Access

IF7

2025-06-18

OAAI

G. Romano; Y. Yang; K.B. Katnam; Z. Zou; P. Potluri

Low-velocity impact response of carbon/epoxy laminates with interlaminar hybrid toughening via core-shell-rubber particles and non-woven thermoplastic fibre veils 碳/环氧层合板通过核壳橡胶粒子和非织造热塑性纤维衬垫实现层间混合增韧的低速冲击响应

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2025-05-13

OAAI

Akbolat, Mehmet Cagatay; Wang, Sheng; Katnam, Kali Babu; Potluri, Prasad; Soutis, Constantinos

Monte Carlo Micro-Stress Field Simulations in Flax/E-Glass Composite Laminae with Non-Circular Flax Fibres 亚麻/E-玻璃复合材料层合板中非圆形亚麻纤维的蒙特卡罗微应力场模拟

POLYMERS

IF4.9

2025-03-02

OAAI

Yang, NL; Zou, ZM; Soutis, C; Potluri, P; Katnam, KB

Effect of micro-scale fibre uncertainties on the mechanical behaviour of natural/synthetic hybrid fibre composites

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2025-01-01

OAAI

Yang, Nenglong; Zou, Zhenmin; Soutis, Constantinos; Potluri, Prasad; Katnam, Kali Babu

The static and fatigue failure of co-cured composite joints with two-scale interface toughening

COMPOSITES PART B-ENGINEERING

IF14.2

2024-12-01

OAAI

Wang, Sheng; Katnam, Kali Babu; Inal, Oguzcan; Zou, Zhenmin; Taylor, James; Sprenger, Stephan; Potluri, Prasad; Soutis, Constantinos

Intra-yarn fibre hybridisation effect on homogenised elastic properties and micro and meso-stress analysis of 2D woven laminae: Two-scale FE model

COMPOSITE STRUCTURES

IF7.1

2024-09-01

OAAI

Yang, Nenglong; Zou, Zhenmin; Potluri, Prasad; Soutis, Constantinos; Katnam, Kali Babu

The effect of hygrothermal ageing on the delamination of Carbon/epoxy laminates with Core-shell rubber nanoparticle and Micro-fibre thermoplastic veil toughening

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2023-08-01

OAAI

Wang, Sheng; Akbolat, Mehmet Cagatay; Katnam, Kali Babu; Zou, Zhenmin; Potluri, Prasad; Sprenger, Stephan; Taylor, James

On the static failure behaviour of co-cured composite joints with enhanced interlaminar fracture energies via multiscale toughening

COMPOSITE STRUCTURES

IF7.1

2023-07-01

OAAI

Inal, Oguzcan; Katnam, Kali Babu; Taylor, James; Sprenger, Stephan; Potluri, Prasad; Soutis, Constantinos

On the effect of binders on interlaminar fracture energies and R-curves of carbon/epoxy laminates with non-woven micro-fibre veils

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2022-11-01

OAAI

Wang, Sheng; Akbolat, Mehmet Cagatay; Inal, Oguzcan; Katnam, Kali Babu; Zou, Zhenmin; Potluri, Prasad; Taylor, James

On mode-I and mode-II interlaminar crack migration and R-curves in carbon/epoxy laminates with hybrid toughening via core-shell rubber particles and thermoplastic micro-fibre veils

COMPOSITES PART B-ENGINEERING

IF14.2

2022-06-01

OAAI

Akbolat, Mehmet Cagatay; Katnam, Kali Babu; Soutis, Constantinos; Potluri, Prasad; Sprenger, Stephan; Taylor, James

Towards balancing in-plane mechanical properties and impact damage tolerance of composite laminates using quasi-UD woven fabrics with hybrid warp yarns

COMPOSITE STRUCTURES

IF7.1

2019-10-01

OAAI

Katnam, K. B.; Dalfi, H.; Potluri, P.

Accelerated microwave curing of fibre-reinforced thermoset polymer composites for structural applications: A review of scientific challenges

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2018-12-01

112

OAAI

Mgbemena, Chinedum Ogonna; Li, Danning; Lin, Meng-Fang; Liddel, Paul Daniel; Katnam, Kali Babu; Thakur, Vijay Kumar; Nezhad, Hamed Yazdani

Quantified approach to pipeline health and integrity management

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES

IF4.2

2018-07-01

OAAI

Afangide, Edet; Sinha, Jyoti K.; Katnam, K. B.

Hybrid composite tensile armour wires in flexible risers: A multi-scale model 柔性立管中的混合复合拉伸铠装线: 多尺度模型

COMPOSITE STRUCTURES

IF7.1

2017-02-01

OAAI

Gautam, M.; Katnam, K. B.; Potluri, P.; Jha, V.; Latto, J.; Dodds, N.

Hybrid composite wires for tensile armours in flexible risers: Manufacturing and mechanical characterisation 用于柔性立管中拉伸装甲的混合复合线: 制造和机械特性

COMPOSITE STRUCTURES

IF7.1

2016-08-01

OAAI

Gautam, M.; Potluri, P.; Katnam, K. B.; Jha, V.; Leyland, J.; Latto, J.; Dodds, N.

Analysing thermally induced macro-scale residual stresses in tailored morphing composite laminates

COMPOSITE STRUCTURES

IF7.1

2014-11-01

PREAI

Telford, R.; Katnam, K. B.; Young, T. M.

The effect of moisture ingress on through-thickness residual stresses in unsymmetric composite laminates: A combined experimental-numerical analysis

COMPOSITE STRUCTURES

IF7.1

2014-01-01

PREAI

Telford, R.; Katnam, K. B.; Young, T. M.

Bonded repair of composite aircraft structures: A review of scientific challenges and opportunities

PROGRESS IN AEROSPACE SCIENCES

IF16.2

2013-08-01

458

PREAI

Katnam, K. B.; Da Silva, L. F. M.; Young, T. M.

研究方向