Hernán A. González Rojas

department of mechanical engineering

21H指数

96论文数

1.1K被引数

收录论文 21

发表时间

Design, manufacture and experimental validation of an electromagnetic device for the vibratory insertion of needles 电磁装置的设计、制造及针对针头振动插入的实验验证

The International Journal of Advanced Manufacturing Technology

IF0

2025-11-25

PREAI

Erick D. Chávez Pereda; Hernán A. González Rojas; Antonio J. Sánchez Egea; Paula Ramos Herrero; Silvia Garcia Vilana

Dynamic Modeling of Needle-Tissue Interaction Applied to Soft Tissue Damage During Needle Extraction

IEEE ACCESS

IF3.6

2025-01-01

OAAI

Pereda, Erick D. Chavez; Rojas, Hernan A. Gonzalez; Egea, Antonio J. Sanchez

Machine Learning-Based Prediction of Specific Energy Consumption for Cut-Off Grinding

SENSORS

IF3.5

2022-09-21

OAAI

Awan, Muhammad Rizwan; Rojas, Hernan A. Gonzalez; Hameed, Saqib; Riaz, Fahid; Hamid, Shahzaib; Hussain, Abrar

Experimental technique to analyze the influence of cutting conditions on specific energy consumption during abrasive metal cutting with thin discs 分析薄圆盘磨料金属切削过程中切削条件对比能耗影响的实验技术

ADVANCES IN MANUFACTURING

IF3.8

2021-08-09

OAAI

Rizwan Awan, Muhammad; Gonzalez Rojas, Hernan A.; Perat Benavides, Jose, I; Hameed, Saqib

Surface Damaging of Brass and Steel Pins when Sliding over Nitrided Samples Cut by Finishing and Roughing EDM Conditions

MATERIALS

IF3.2

2020-07-17

OAAI

Martynenko, Vitaliy; Martinez Krahmer, Daniel; Napoles Alberro, Amelia; Cabo, Amado; Perez, Daniela; Zayas Figueras, Enrique E.; Gonzalez Rojas, Hernan A.; Sanchez Egea, Antonio J.

Estimation of Specific Cutting Energy in an S235 Alloy for Multi-Directional Ultrasonic Vibration-Assisted Machining Using the Finite Element Method

MATERIALS

IF3.2

2020-01-24

OAAI

Florez Garcia, Luis C.; Gonzalez Rojas, Hernan A.; Sanchez Egea, Antonio J.

Angular Velocity Analysis Boosted by Machine Learning for Helping in the Differential Diagnosis of Parkinsons Disease and Essential Tremor

IEEE ACCESS

IF3.6

2020-01-01

OAAI

Loaiza Duque, Julian D.; Sanchez Egea, Antonio J.; Reeb, Theresa; Gonzalez Rojas, Hernan A.; Gonzalez-Vargas, Andres M.

Corrosion Behavior of an AISI/SAE Steel Cut by Electropulsing

MATERIALS

IF3.2

2019-11-18

OAAI

Alberto Montilla, Carlos; Alberto Gonzalez, Hernan; Kallewaard, Valentina; Luis Tristancho, Jose

On the microstructure effects when using electropulsing versus furnace treatments while drawing inox 308L

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2019-04-01

OAAI

Sanchez Egea, A. J.; Jorba Peiro, J.; Walter Signorelli, Javier; Gonzalez Rojas, H. A.; Javier Celentano, Diego

Model Based on an Effective Material-Removal Rate to Evaluate Specific Energy Consumption in Grinding

MATERIALS

IF3.2

2019-03-21

OAAI

Napoles Alberro, Amelia; Gonzalez Rojas, Hernan A.; Sanchez Egea, Antonio J.; Hameed, Saqib; Pena Aguilar, Reyna M.

Influence of the Regime of Electropulsing-Assisted Machining on the Plastic Deformation of the Layer Being Cut

MATERIALS

IF3.2

2018-05-25

OAAI

Hameed, Saqib; Gonzalez Rojas, Hernan A.; Perat Benavides, Jose I.; Napoles Alberro, Amelia; Sanchez Egea, Antonio J.

A hybrid mixed double-sided incremental forming method for forming Ti6Al4V alloy

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2016-01-01

OAAI

Valoppi, Beatrice; Sanchez Egea, Antonio J.; Zhang, Zixuan; Gonzalez Rojas, Hernan A.; Ghiotti, Andrea; Bruschi, Stefania; Cao, Jian

Mechanical and metallurgical changes on 308L wires drawn by electropulses

MATERIALS & DESIGN

IF7.9

2016-01-01

PREAI

Sanchez Egea, Antonio J.; Gonzalez Rojas, Hernan A.; Celentano, Diego J.; Jorba Peiro, Jordi

Effect of electroplastic cutting on the manufacturing process and surface properties

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2015-08-01

PREAI

Sanchez Egea, Antonio J.; Gonzalez Rojas, Hernan A.; Montilla Montana, Carlos A.; Kallewaard Echeverri, Valentina

Experimental Study on the Mechanical Effects of the Vibration-Assisted Ball-Burnishing Process

MATERIALS AND MANUFACTURING PROCESSES

IF4.7

2015-04-01

OAAI

Travieso-Rodriguez, J. A.; Gomez Gras, G.; Jorba Peiro, J.; Carrillo, F.; Dessein, G.; Alexis, J.; Gonzalez Rojas, H.

Electroplasticity-assisted bottom bending process

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2014-11-01

PREAI

Sanchez Egea, Antonio J.; Gonzalez Rojas, Hernan A.; Celentano, Diego J.; Antonio Travieso-Rodriguez, J.; Lluma i Fuentes, Jordi

Improving the Surface Finish of Concave and Convex Surfaces Using a Ball Burnishing Process

MATERIALS AND MANUFACTURING PROCESSES

IF4.7

2011-12-01

OAAI

Travieso-Rodriguez, J. A.; Dessein, G.; Gonzalez-Rojas, H. A.

Influence of feed, eccentricity and helix angle on topography obtained in side milling processes

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

IF18.8

2011-12-01

PREAI

Buj-Corral, Irene; Vivancos-Calvet, Joan; Gonzalez-Rojas, Hernan

Nonlinear Dynamic Analysis of Oscillatory Repetitive Movements in Parkinson's Disease and Essential Tremor

MOVEMENT DISORDERS

IF7.6

2010-09-03

PREAI

Costa, Joao; Gonzalez, Hernan A.; Valldeoriola, Francesc; Gaig, Carles; Tolosa, Eduardo; Valls-Sole, Josep

A new analytical solution for prediction of forward tension in the drawing process

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2008-03-01

PREAI

Rojas, Hernan A. Gonzalez; Calvet, Joan Vivancos; Bubnovich, V. I.

研究方向