Jinwu Kang - Publications, H-index & Citations

康进武 (Jinwu Kang)

tsinghua university

21H指数

103论文数

1.5K被引数

收录论文 34

发表时间

A novel short-time heat treatment for stabilizing the compressive behavior of LPBF AlSi10Mg TPMS structures 一种新型短时热处理方法，用于稳定LPBF AlSi10Mg TPMS结构的压缩行为

Journal of Alloys and Compounds

IF6.3

2025-07-31

PREAI

Yuhang Huang; Tianjiao Wang; Gang Nie; Jinwu Kang; Hailiang Yu

Deep learning based heat transfer simulation of the casting process

SCIENTIFIC REPORTS

IF3.9

2024-11-23

OAAI

Kang, Jinwu; Wang, Jiwu; Han, Xiao; Zhao, Qichao

Study on the Mechanical Properties of 3D-Printed Sand Mold Specimens with Complex Hollow Structures

MATERIALS

IF3.2

2024-02-21

OAAI

Xu, Jingying; Kang, Jinwu; Hu, Yongkang; Shen, Houfa; Mao, Weimin

Effects of hollow sand mold on the microstructure and mechanical properties of a low pressure aluminum alloy casting

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-01-01

OAAI

Liu, Baolin; Kang, Jinwu; Yang, Xin; Zhang, Bo; Bian, Yi

Study on the Gas Release of 3D-Printed Furan Resin Sand Core during the Casting Process

MATERIALS

IF3.2

2023-06-02

OAAI

Wang, Xiaolong; Wu, Qihua; Huang, Yuhang; Li, Na; Wu, Xiongzhi; Chen, Xiuming; Wang, Jiwu; Jing, Tao; Huang, Tianyou; Kang, Jinwu

Numerical simulation of the directional solidification process with multi-shell mold being gradually immersed in water

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2022-07-01

OAAI

Xu, Jingying; Kang, Jinwu; Zheng, Lele; Mao, Weimin; Wang, Jiwu

High-throughput investigation of laser powder bed fabricated Inconel 718 alloy: Fabrication, microstructure and performance

MATERIALS TODAY COMMUNICATIONS

IF4.5

2021-06-01

PREAI

Wang, Xiang; Wang, Jiwu; Kang, Jinwu; Wang, Tianjiao; Wu, Pengyue; Feng, Tao; Zheng, Lele; Rong, Yiming

3D Phase Field Modeling of Multi-Dendrites Evolution in Solidification and Validation by Synchrotron X-ray Tomography 凝固过程中多枝晶演化的3D相场建模及同步辐射x射线层析成像验证

MATERIALS

IF3.2

2021-01-21

OAAI

Wang, Shuo; Guo, Zhipeng; Kang, Jinwu; Zou, Meishuai; Li, Xiaodong; Zhang, Ang; Du, Wenjia; Zhang, Wei; Lee, Tung Lik; Xiong, Shoumei; Mi, Jiawei

Microstructure and mechanical behavior of bright crescent areas in Inconel 718 sample fabricated by selective laser melting

MATERIALS & DESIGN

IF7.9

2021-01-01

OAAI

Yi, Jihao; Kang, Jinwu; Wang, Tianjiao; Wang, Xiang; Feng, Tao; Feng, Yunlong; Wu, Pengyue

Study on the Directional Solidification Process of an Aluminum Alloy Bar in Multishell Mold Being Gradually Immersed in Water

MATERIALS

IF3.2

2020-05-11

OAAI

Wang, Jiwu; Zheng, Lele; Kang, Jinwu; Hu, Yongyi

Modeling and Simulation of the Casting Process with Skeletal Sand Mold

MATERIALS

IF3.2

2020-03-31

OAAI

Kang, Jinwu; Wang, Jiwu; Shangguan, Haolong; Zheng, Lele; Deng, Chengyang; Hu, Yongyi; Yi, Jihao

The dynamic arch bending mechanism of flat bridge structure of AlSi10Mg during SLM process

MATERIALS & DESIGN

IF7.9

2020-03-01

OAAI

Zhang, Xiaochuan; Wang, Jiwu; Kang, Jinwu; Rong, Yiming; Duan, Guoqing; Wu, Pengyue; Zheng, Lele

Effect of Layer-Wise Varying Parameters on the Microstructure and Soundness of Selective Laser Melted INCONEL 718 Alloy 逐层变化参数对选择性激光熔化INCONEL 718合金的组织和稳定性的影响

MATERIALS

IF3.2

2019-07-05

OAAI

Wang, Xiang; Kang, Jinwu; Wang, Tianjiao; Wu, Pengyue; Feng, Tao; Zheng, Lele

Effect of laser energy density on the microstructure, mechanical properties, and deformation of Inconel 718 samples fabricated by selective laser melting 激光能量密度对选区激光熔化制备的Inconel 718样品的微观结构，力学性能和变形的影响

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2019-05-01

120

PREAI

Yi, J. H.; Kang, J. W.; Wang, T. J.; Wang, X.; Hu, Y. Y.; Feng, T.; Feng, Y. L.; Wu, P. Y.

Effect of the forced flow on the permeability of dendritic networks: A study using phase-field-lattice Boltzmann method

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

IF5.8

2019-03-01

PREAI

Zhang, X.; Kang, J.; Guo, Z.; Han, Q.

On the mechanism of dendritic fragmentation by ultrasound induced cavitation 超声诱导空化作用树枝状碎片的机理研究

ULTRASONICS SONOCHEMISTRY

IF9.7

2019-03-01

OAAI

Wang, S.; Guo, Z. P.; Zhang, X. P.; Zhang, A.; Kang, J. W.

In situ high speed imaging study and modelling of the fatigue fragmentation of dendritic structures in ultrasonic fields

ACTA MATERIALIA

IF9.3

2019-02-01

OAAI

Wang, S.; Kang, J.; Guo, Z.; Lee, T. L.; Zhang, X.; Wang, Q.; Deng, C.; Mi, J.

Effect of Scanning Routes on the Stress and Deformation of Overhang Structures Fabricated by SLM

MATERIALS

IF3.2

2018-12-24

OAAI

Zhang, Xiaochuan; Kang, Jinwu; Rong, Yiming; Wu, Pengyue; Feng, Tao

A Study on the Effect of Ultrasonic Treatment on the Microstructure of Sn-30 wt.% Bi Alloy

MATERIALS

IF3.2

2018-10-01

OAAI

Wang, Shuo; Kang, Jinwu; Zhang, Xiaopeng; Guo, Zhipeng

Effects of hollow structures in sand mold manufactured using 3D printing technology

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2018-05-01

PREAI

Deng, Chengyang; Kang, Jinwu; Shangguan, Haolong; Hu, Yongyi; Huang, Tao; Liu, Zhiyong

研究方向