Yahya Kemal Tür - Publications, H-index & Citations

Yahya Kemal Tür

Gebze Technical University

12H指数

34论文数

378被引数

收录论文 13

发表时间

Effect of cold sintering on the sintering shrinkage matching of NiO-GDC anode with GDC electrolytes in making anode-supported solid oxide fuel cells 冷烧结对阳极支撑固体氧化物燃料电池nio-gdc阳极与GDC电解质烧结收缩匹配的影响

SOLID STATE IONICS

IF3.3

2024-05-01

PREAI

Ucun, Tugce; Murutoglu, Murat; Ulasan, Ozge; Buyukaksoy, Aligul; Tur, Yahya Kemal; Yilmaz, Huseyin

Mechanical properties of 3D-printed Al2O3 honeycomb sandwich structures prepared using the SLA method with different core geometries

CERAMICS INTERNATIONAL

IF5.6

2024-01-01

PREAI

Yildiz, Betul Kafkaslioglu; Yildiz, Ali Suat; Kul, Mehmet; Tur, Yahya Kemal; Isik, Elif; Duran, Cihangir; Yilmaz, Huseyin

Cold sintering-assisted densification of GDC electrolytes for SOFC applications

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

IF8.3

2022-05-01

PREAI

Murutoglu, Murat; Ucun, Tugce; Ulasan, Ozge; Buyukaksoy, Aligul; Tur, Yahya Kemal; Yilmaz, Huseyin

Cold Sintering of Anode-Supported 8YSZ/NiO-8YSZ Bilayers for Solid Oxide Fuel Cells 用于固体氧化物燃料电池的阳极支撑的8YSZ/NiO-8YSZ双层的冷烧结

ACS APPLIED ENERGY MATERIALS

IF5.5

2021-12-09

PREAI

Ucun, Tugce; Murutoglu, Murat; Ulasan, Ozge; Demirkal, Emrah; Buyukaksoy, Aligul; Tur, Yahya Kemal; Yilmaz, Huseyin

Effect of ZrO2 content on the microstructure and flexural strength of Al2O3-ZrO2 composites with the stored failure energy-fragmentation relations

CERAMICS INTERNATIONAL

IF5.6

2021-12-01

PREAI

Yildiz, Betul Kafkaslioglu; Tur, Yahya Kemal

Evaluation of mechanical properties of Al2O3-Cr2O3 ceramic system prepared in different Cr2O3 ratios for ceramic armour components

CERAMICS INTERNATIONAL

IF5.6

2019-11-01

PREAI

Yildiz, Betul Kafkaslioglu; Yilmaz, Huseyin; Tur, Yahya Kemal

Influence of nickel addition on the microstructure and mechanical properties of Al2O3-5vol%ZrO2 ceramic composites prepared via precipitation method

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS

IF7.2

2019-07-06

PREAI

Yildiz, Betul Kafkaslioglu; Yilmaz, Huseyin; Tur, Yahya Kemal

An investigation of equibiaxial flexural strength and hardness properties of Al2O3-Ni nanocomposites based microstructures with ZrO2 and Cr2O3 additives

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2019-06-01

PREAI

Yildiz, Betul Kafkaslioglu; Tur, Yahya Kemal

Pressureless sintering of Al2O3/Ni nanocomposites produced by heterogeneous precipitation method with varying nickel contents

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2016-06-01

PREAI

Kafkaslioglu, Betul; Tur, Yahya Kemal

The effect of 3 mol% Y2O3 stabilized ZrO2 produced by a steric entrapment method on the mechanical and sintering properties of Cr3C2 based cermets

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2012-10-01

PREAI

Ozer, Ali; Kriven, Waltraud M.; Tur, Yahya Kemal

Processing and mechanical properties of textured mullite/zirconia composites

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2007-01-01

PREAI

Ozturk, Cem; Tur, Yahya Kemal

Phase formation and texture development in mullite/zirconia composites fabricated by templated grain growth

JOURNAL OF MATERIALS SCIENCE

IF3.9

2006-04-12

PREAI

Duran, C.; Tur, Y. K.

Mechanical behaviour of a low-clay translucent whiteware

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

IF6.2

2006-01-01

PREAI

Ustundag, CB; Tur, YK; Capoglu, A

研究方向