J.K. Spelt - Publications, H-index & Citations

J.K. Spelt

university of toronto

50H指数

244论文数

8.4K被引数

收录论文 97

发表时间

Aerodynamic focusing of an abrasive air jet and its effect on machining resolution

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

IF18.8

2019-08-01

PREAI

Luo, Xiangyu; Palumbo, Joshua; Papini, Marcello; Spelt, K.

Low-stress creep deformation in two opto-electronic glass-epoxy joints: Part II - Joint measurements and FEA

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

IF3.5

2018-11-01

PREAI

Brown, Ryan; Moidu, Jaleel; Colbourne, Paul; Spelt, Jan K.

Low-stress creep deformation in two opto-electronic glass-epoxy joints: Part I - adhesive creep data

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

IF3.5

2018-11-01

PREAI

Brown, Ryan; Moidu, Jaleel; Colbourne, Paul; Spelt, Jan K.

Characterizing and modelling delamination of carbon-fiber epoxy laminates during abrasive waterjet cutting

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2018-09-01

PREAI

Schwartzentruber, J.; Papini, M.; Spelt, J. K.

Modelling of delamination due to hydraulic shock when piercing anisotropic carbon-fiber laminates using an abrasive waterjet 使用磨料水射流刺穿各向异性碳纤维层压板时，由于液压休克引起的分层建模

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

IF18.8

2018-09-01

PREAI

Schwartzentruber, J.; Spelt, J. K.; Papini, M.

Abrasive jet turning of glass and PMMA rods and the micro-machining of helical channels

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

IF3.7

2018-07-01

PREAI

Nouhi, A.; Spelt, J. K.; Papini, M.

Prediction of surface roughness in abrasive waterjet trimming of fiber reinforced polymer composites

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

IF18.8

2017-11-01

PREAI

Schwartzentruber, J.; Spelt, J. K.; Papini, M.

Selective removal of metallic layers from sintered ceramic and metallic plates using abrasive slurry-jet micro-machining

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2017-10-01

PREAI

Kowsari, K.; Papini, M.; Spelt, J. K.

Erosive smoothing of abrasive slurry-jet micro-machined channels in glass, PMMA, and sintered ceramics: Experiments and roughness model

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

IF3.7

2017-07-01

PREAI

Kowsari, K.; Schwartzentruber, J.; Spelt, J. K.; Papini, M.

Prediction of the erosive footprint in the abrasive jet micro-machining of flat and curved glass

TRIBOLOGY INTERNATIONAL

IF6.9

2017-02-01

PREAI

Kowsari, K.; Nouhi, A.; Hadavi, V.; Spelt, J. K.; Papini, M.

The effects of fluid vapor pressure and viscosity on the shapes of abrasive slurry-jet micro-machined holes and channels 流体蒸汽压和粘度对磨料浆体射流微加工孔和通道形状的影响

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

IF18.8

2016-11-01

PREAI

Kowsari, K.; Amini, M. H.; Papini, M.; Spelt, J. K.

Bending strength of adhesive joints in microelectronic components: Comparison of edge-bonding and underfilling

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2016-09-01

PREAI

Akbari, Saeed; Nourani, Amir; Spelt, Jan K.

Calibrated CFD erosion modeling of abrasive slurry jet micro-machining of channels in ductile materials

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2016-08-01

PREAI

Nouraei, H.; Kowsari, K.; Samareh, B.; Spelt, J. K.; Papini, M.

Effect of adhesive fillet geometry on bond strength between microelectronic components and composite circuit boards

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2016-08-01

PREAI

Akbari, Saeed; Nourani, Amir; Spelt, Jan K.

Fracture load prediction of BGA solder joints: Cohesive zone modeling and experimental verification

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2016-07-01

OAAI

Nourani, Amir; Akbari, Saeed; Spelt, Jan K.

Abrasive jet machining of channels on highly-curved glass and PMMA surfaces

WEAR

IF6.1

2016-06-01

PREAI

Nouhi, A.; Kowsari, K.; Spelt, J. K.; Papini, M.

CFD-aided prediction of the shape of abrasive slurry jet micro-machined channels in sintered ceramics

CERAMICS INTERNATIONAL

IF5.6

2016-05-01

PREAI

Kowsari, K.; Nouraei, H.; Samareh, B.; Papini, M.; Spelt, J. K.

Operating parameters to minimize feature size in abrasive slurry jet micro-machining

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

IF3.7

2016-04-01

PREAI

Nouraei, H.; Kowsari, K.; Papini, M.; Spelt, J. K.

Hybrid erosive jet micro-milling of sintered ceramic wafers with and without copper-filled through-holes

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2016-04-01

PREAI

Kowsari, K.; Sookhaklari, M. R.; Nouraei, H.; Papini, M.; Spelt, J. K.

Abrasive slurry jet micro-machining of edges, planar areas and transitional slopes in a talc-filled co-polymer

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

IF3.7

2016-01-01

PREAI

Tamannaee, N.; Spelt, J. K.; Papini, M.

研究方向