logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
A

Anatoly Popovich

peter the great saint petersburg polytechnic university

27H指数
227论文数
3.9K被引数
收录论文 62
发表时间
logo
From Waste to Cathode: A Comparative Evaluation of Sol–Gel and Co-Precipitation Routes for Closed-Loop Recycling of Lithium-Ion Battery Cathodes从废料到正极：溶胶-凝胶法与共沉淀法制备锂离子电池正极闭环回收的比较评估
errBatteries
IF0
err2026-03-04
err0
errOAAI
errAlexandra Kosenko; Konstantin Pushnitsa; Pavel Novikov; Anatoliy A. Popovich
err分享
err收藏
Development of low-modulus Ti-Ta alloys by in-situ synthesis during selective laser melting for implant applications
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2025-04-05
err0
PREAI
errPolozov, Igor; Nefyodova, Victoria; Zolotarev, Anton; Sokolova, Victoria; Gracheva, Anna; Popovich, Anatoly
err分享
err收藏
Lithium Iron Phosphate Battery Regeneration and Recycling: Techniques and Efficiency磷酸铁锂电池再生与回收：技术与效率
errBATTERIES-BASEL
IF4.8
err2025-03-31
err0
errOAAI
errKosenko, Alexandra; Bolotova, Antonina; Pushnitsa, Konstantin; Novikov, Pavel; Popovich, Anatoliy A.
err分享
err收藏
Auxetic Meta-Biomaterials: Computer Simulation and Experimental Results负泊松比仿生超材料：计算机模拟与实验结果
errMETALS
IF2.5
err2025-02-25
err0
errOAAI
errFarber, Eduard; Orlov, Alexey; Popovich, Anatoly
err分享
err收藏
3D-Printed Lithium-Ion Battery Electrodes: A Brief Review of Three Key Fabrication Techniques3d打印锂离子电池电极: 三种关键制造技术的简要回顾
errMATERIALS
IF3.2
err2024-12-02
err0
errOAAI
errPavlovskii, Alexander A.; Pushnitsa, Konstantin; Kosenko, Alexandra; Novikov, Pavel; Popovich, Anatoliy A.
err分享
err收藏
Investigation of the 4D Multi-Material 316L/FeNi36 Obtained by Selective Laser Melting
errMICROMACHINES
IF3
err2024-10-23
err0
errOAAI
errRepnin, Arseniy; Borisov, Evgenii; Maksimov, Aleksey; Rozhkova, Daria; Popovich, Anatoly
err分享
err收藏
Mechanical properties of high-entropy alloys CoCrFeNiMnWx manufactured by laser powder-bed fusion additive manufacturing using mechanically alloyed plasma spheroidized powders使用机械合金化的等离子球化粉末通过激光粉末床熔融增材制造制造的高熵合金CoCrFeNiMnWx的机械性能
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2024-06-18
err1
PREAI
errOzerskoi, N. E.; Razumov, N. G.; Silin, A. O.; Zotov, O. G.; Borisov, E. V.; Popovich, A. A.
err分享
err收藏
Effect of heat treatment on microstructure and functional properties of additively manufactured NiTi shape memory alloys热处理对增材制造NiTi形状记忆合金组织和功能性能的影响
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2023-12-01
err13
errOAAI
errZhu, Jia-Ning; Zhu, Weijia; Borisov, Evgenii; Yao, Xiyu; Riemslag, Ton; Goulas, Constantinos; Popovich, Anatoly; Yan, Zhaorui; Tichelaar, Frans D.; Mainali, Durga P.; Hermans, Marcel; Popovich, Vera
err分享
err收藏
Healing cracks in additively manufactured NiTi shape memory alloys在增材制造的NiTi形状记忆合金中愈合裂纹
errVIRTUAL AND PHYSICAL PROTOTYPING
IF8.8
err2023-08-18
err8
errOAAI
errZhu, Jia-Ning; Ding, Zhaoying; Borisov, Evgenii; Yao, Xiyu; Brouwer, Johannes C.; Popovich, Anatoly; Hermans, Marcel; Popovich, Vera
err分享
err收藏
Effect of heat treatment on structure and magnetic properties of Ni36Co37Al27 alloy produced by laser powder bed fusion
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2023-03-01
err2
PREAI
errMazeeva, A. K.; Kim, A.; Shamshurin, A. I.; Razumov, N. G.; Nazarov, D. V.; Borisov, A. N.; Popovich, A. A.
err分享
err收藏
Improvement of thin-film Ni-rich ALD cathode for microbatteries微电池薄膜富镍ALD阴极的改进
errAPPLIED SURFACE SCIENCE
IF6.9
err2023-01-01
err3
PREAI
errVishniakov, Pavel; Nazarov, Denis; Koshtyal, Yury; Rumyantsev, Aleksander; Shengjie, Peng; Nemov, Sergey; Popovich, Anatoly; Maximov, Maxim
err分享
err收藏
Interface Characterization of Bimetallic Ti-6Al-4V/Ti2AlNb Structures Prepared by Selective Laser Melting
errMATERIALS
IF3.2
err2022-11-30
err9
errOAAI
errPolozov, Igor; Gracheva, Anna; Popovich, Anatoly
err分享
err收藏
Modification of Inconel 718 Properties by In Situ Y Addition in Selective Laser Melting
errMATERIALS
IF3.2
err2022-09-07
err4
errOAAI
errBorisov, Evgenii; Popovich, Anatoly; Sufiiarov, Vadim
err分享
err收藏
Structure, Mechanical and Magnetic Properties of Selective Laser Melted Fe-Si-B Alloy
errMATERIALS
IF3.2
err2022-06-09
err9
errOAAI
errSufiiarov, Vadim; Erutin, Danil; Kantyukov, Artem; Borisov, Evgenii; Popovich, Anatoly; Nazarov, Denis
err分享
err收藏
Structural features of complete and partial activation of Li-rich cathodes studied by in-situ XRD
errELECTROCHIMICA ACTA
IF5.6
err2022-05-01
err14
PREAI
errChernyavsky, Vladislav; Kim, Artem; Koshtyal, Yury; Rumyantsev, Aleksander; Popovich, Anatoly; Maximov, Maxim Yu
err分享
err收藏
Controlling microstructure evolution and phase transformation behavior in additive manufacturing of nitinol shape memory alloys by tuning hatch distance
errJOURNAL OF MATERIALS SCIENCE
IF3.9
err2022-03-03
err33
errOAAI
errZhu, Jia-Ning; Borisov, Evgenii; Liang, Xiaohui; Huizenga, Richard; Popovich, Anatoly; Bliznuk, Vitaliy; Petrov, Roumen; Hermans, Marcel; Popovich, Vera
err分享
err收藏
Optimization of EI961 steel spheroidization process for subsequent use in additive manufacturing: Effect of plasma treatment on the properties of EI961 powderEI961钢球化工艺的优化，用于后续增材制造: 等离子体处理对EI961粉末性能的影响
errREVIEWS ON ADVANCED MATERIALS SCIENCE
IF3.9
err2021-12-18
err2
errOAAI
errOzerskoi, Nikolai; Silin, Alexey; Razumov, Nikolay; Popovich, Anatoly
err分享
err收藏
LCD-SLA 3D printing of BaTiO3 piezoelectric ceramics
errCERAMICS INTERNATIONAL
IF5.6
err2021-11-01
err65
PREAI
errSotov, Anton; Kantyukov, Artem; Popovich, Anatoly; Sufiiarov, Vadim
err分享
err收藏
Mechanical and microstructural characterization of WC-Co consolidated by binder jetting additive manufacturing通过粘合剂喷射增材制造固结的wc-co的机械和微观结构表征
errINTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
IF4.6
err2021-11-01
err48
PREAI
errMariani, Marco; Goncharov, Ivan; Mariani, Davide; De Gaudenzi, Gian Pietro; Popovich, Anatoly; Lecis, Nora; Vedani, Maurizio
err分享
err收藏
Electrochemical activity and SEI formation inhibition of Al in Ni-Al-O ALD thin films
errIONICS
IF2.6
err2021-10-25
err0
PREAI
errMitrofanov, Ilya; Nazarov, Denis; Koshtyal, Yury; Kim, Artem; Kumar, Rajesh; Rumyantsev, Aleksander; Popovich, Anatoly; Maximov, Maxim
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
R
Roumen Petrov
H 指数: 54 · 论文数: 411
Q
Qingsheng Wang
H 指数: 45 · 论文数: 499
M
Maurizio Vedani
H 指数: 44 · 论文数: 311
R
Rajesh Kumar
H 指数: 40 · 论文数: 291
F
F.D. Tichelaar
H 指数: 39 · 论文数: 205
查看更多