A.H. Kokabi - Publications, H-index & Citations

A.H. Kokabi

sharif university of technology

54H指数

205论文数

7.7K被引数

收录论文 101

发表时间

Magnetic-field-assisted soldering of Sn-Ag-Cu composite solder reinforced with ferromagnetic graphene/cobalt (CoGNS) particles: Microstructural and mechanical insights 磁场辅助的Sn-Ag-Cu复合焊料（以铁磁性石墨烯/钴（CoGNS）颗粒增强）的焊接：微观结构和力学见解

Journal of Alloys and Compounds

IF6.3

2025-12-03

PREAI

M. Tamizi; M. Movahedi; A.H. Kokabi; Y. Miyashita

Microstructural and mechanical characterization of ultrasonic metal welds: insights into micro-bonds formation, dynamic recrystallization, and joint strength optimization 超声金属焊缝的微观结构与力学表征：对微焊点形成、动态再结晶及接头强度优化的见解

WELDING IN THE WORLD

IF2.5

2025-12-01

PREAI

Yusefi, Ali; Allahverdizadeh, Vahid; Kokabi, Amir Hossein; Abedini, Rezvan; Fartashvand, Vahid

Investigation of Process Parameters on the Mechanical Strength in Ultrasonic Metal Welding of Aluminum to Copper Dissimilar Joints 铝铜异种接头超声金属焊接中机械强度的工艺参数研究

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

IF1.6

2024-08-10

PREAI

Yusefi, Ali; Kokabi, Amir Hossein; Abedini, Rezvan; Fartashvand, Vahid; Allahverdizadeh, Vahid

Microstructure evolution and mechanical properties analysis in dissimilar ultrasonic metal welding of aluminum to copper 铝铜异种金属超声焊接组织演变及力学性能分析

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-05-01

OAAI

Yusefi, Ali; Kokabi, Amir Hossein; Abedini, Rezvan; Fartashvand, Vahid; Allahverdizadeh, Vahid

Effect of welding current and speed on solidification cracking susceptibility in gas tungsten arc fillet welding of dissimilar aluminum alloys: Coupling a weld simulation and a cracking criterion

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-05-01

OAAI

Bodaghi, Fatemeh; Movahedi, Mojtaba; Na, Suck -Joo; Zhang, Lin-Jie; Kokabi, Amir Hossein

Cobalt-Graphene NanoSheets enhanced Sn-0.3Ag-0.7Cu composite solder: Study on microstructure, crystal orientation relations and mechanical properties

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2024-03-01

PREAI

Tamizi, M.; Movahedi, M.; Kokabi, A. H.; Miyashita, Y.

Influence of pass number on microstructure, mechanical, and tribological properties of cold-rolled Al1050 during friction stir processing

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-11-01

OAAI

Keshavarz, Hossein; Kokabi, Amir Hossein

Estimation of solidification cracking susceptibility in Al-Si-Cu alloy weld: effects of anisotropic permeability and deformation orientation

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-03-01

OAAI

Bodaghi, F.; Movahedi, M.; Kokabi, A. H.

Microstructural and mechanical evaluation of submerged arc welded HSLA 4135 steel by modeled and manufactured granular Cr-Mo bonded active basic flux

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2021-04-01

PREAI

Alishavandi, Mahdi; Mohammadmirzaei, Mahdi; Ebadi, Mahnam; Kokabi, Amir Hossein

Micro-scale evolution of mechanical properties of glass-ceramic sealant for solid oxide fuel/electrolysis cells

CERAMICS INTERNATIONAL

IF5.6

2021-02-01

PREAI

Hasanabadi, M. Fakouri; Malzbender, J.; Gross-Barsnick, S. M.; Abdoli, H.; Kokabi, A. H.; Faghihi-Sani, M. A.

A comparative study between friction stir processing and friction stir vibration processing to develop magnesium surface nanocomposites 搅拌摩擦加工与搅拌摩擦振动加工开发镁表面纳米复合材料的对比研究

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS

IF7.2

2020-08-15

PREAI

Bagheri, Behrouz; Abbasi, Mahmoud; Abdollahzadeh, Amin; Kokabi, Amir Hossein

Corrosion -wear behavior of AA1050/mischmetal oxides surface nanocomposite fabricated by friction stir processing

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2020-08-01

PREAI

Alishavandi, Mahdi; Khollari, Mohammad Amin Razmjoo; Ebadi, Mahnam; Alishavandi, Sajjad; Kokabi, Amir Hossein

Microstructural and mechanical characteristics of AA1050/mischmetal oxide in-situ hybrid surface nanocomposite by multi-pass friction stir processing

SURFACE & COATINGS TECHNOLOGY

IF6.1

2020-04-01

PREAI

Alishavandi, Mahdi; Ebadi, Mahnam; Alishavandi, Sajjad; Kokabi, Amir Hossein

Finite element optimization of sample geometry for measuring the torsional shear strength of glass/metal joints

CERAMICS INTERNATIONAL

IF5.6

2020-03-01

PREAI

Hasanabadi, M. Fakouri; Malzbender, J.; Gross-Barsnick, S. M.; Abdoli, H.; Kokabi, A. H.; Faghihi-Sani, M. A.

Friction stir welding of advanced high strength dual phase steel: Microstructure, mechanical properties and fracture behavior

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2020-01-01

PREAI

Mahmoudiniya, Mahdi; Kokabi, Amir Hossein; Goodarzi, Massoud; Kestens, Leo A. I.

Effect of intermetallic compounds on the fracture behavior of dissimilar friction stir welding joints of Mg and Al alloys 金属间化合物对镁合金异种搅拌摩擦焊接头断裂行为的影响

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS

IF7.2

2019-10-04

PREAI

Baghdadi, Amir Hossein; Sajuri, Zainuddin; Selamat, Nor Fazilah Mohamad; Omar, Mohd Zaidi; Miyashita, Yukio; Kokabi, Amir Hossein

Room- and high-temperature torsional shear strength of solid oxide fuel/electrolysis cell sealing material

CERAMICS INTERNATIONAL

IF5.6

2019-02-01

PREAI

Hasanabadi, M. Fakouri; Kokabi, A. H.; Faghihi-Sani, M. A.; Gross-Barsnick, S. M.; Malzbender, J.

Room- and high-temperature flexural strength of a stable solid oxide fuel/electrolysis cell sealing material

CERAMICS INTERNATIONAL

IF5.6

2019-01-01

PREAI

Hasanabadi, M. Fakouri; Faghihi-Sani, M. A.; Kokabi, A. H.; Grass-Barsnick, S. M.; Malzbender, J.

Metallurgical and mechanical properties of underwater friction stir welds of Al7075 aluminum alloy

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2018-12-01

PREAI

Rouzbehani, R.; Kokabi, A. H.; Sabet, H.; Paidar, M.; Ojo, O. O.

Microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2018-11-01

PREAI

Mahmoudiniya, Mandi; Kokabi, Amir Hossein; Kheirandish, Shahram; Kestens, Leo A., I

研究方向