Jyotsna Dutta Majumdar - Publications, H-index & Citations

Jyotsna Dutta Majumdar

indian institute of technology system (iit system)

43H指数

263论文数

7.5K被引数

收录论文 91

发表时间

Physical, mechanical and electrochemical performance of nanostructured TiO2 surface on titanium developed by anodization 阳极氧化法制备的纳米结构TiO2表面在钛上的物理、力学及电化学性能

Journal of Materials Science

IF3.9

2026-09-17

PREAI

Tarun Kumar Gayen; Tapas Bera; Anupam Midya; Jyotsna Dutta Majumdar

Tribological performance of laser surface nitrided Ti-13Nb-13Zr using diode laser processed under optimum parameters 采用二极管激光在最佳参数下处理的激光表面氮化Ti-13Nb-13Zr的摩擦学性能

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING

IF2.8

2026-05-19

PREAI

Bera, Tapas; Manna, Indranil; Majumdar, Jyotsna Dutta

Role of Mechanical Milling and Spraying Technology on the Microstructure and Wear Behavior of CoNiCrAlY Coating Developed on Inconel 718 Substrate 机械研磨和喷涂技术对Inconel 718基体上制备的CoNiCrAlY涂层微观结构和磨损行为的影响

Journal of Thermal Spray Technology

IF3.3

2026-04-15

PREAI

Annadaa Shankara Dash; Indranil Manna; Jyotsna Dutta Majumdar

Laser-assisted microstructural engineering of near-beta titanium alloy (Ti-13Nb-13Zr) surface using fibre-coupled diode laser and its effect on wear and tribo-corrosion performance 使用光纤耦合二极管激光对近β钛合金(Ti-13Nb-13Zr)表面进行激光辅助微观结构工程及其对磨损和 tribocorrosion 性能的影响

Surface and Coatings Technology

IF6.1

2025-12-18

PREAI

Tapas Bera; Indranil Manna; Jyotsna Dutta Majumdar

Electron beam welding of 347 austenitic stainless steel: Structure-property relationships 347奥氏体不锈钢的电子束焊接：结构与性能关系

Materials Today Communications

IF4.5

2025-12-16

OAAI

Soumyabrata Basak; Mounarik Mondal; Sumit Kumar Sharma; Jyotsna Dutta Majumdar; Kisor Kumar Sahu; Vasundhara Singh

Parametric Optimization of Multicomponent Laser Surface Alloying of AISI 316L Stainless Steel using Taguchi's Grey Relational Analysis 采用Taguchi灰色关联分析法对AISI 316L不锈钢多组分激光表面合金化的参数优化

Journal of Materials Engineering and Performance

IF2

2025-12-01

PREAI

Krishna, Shree; Bera, Tapas; Chakraborty, Debjani; Manna, Indranil; Dutta Majumdar, Jyotsna

Laser Surface Cladding as a Sustainable Alternative to Hard-Chrome Plating-A Mechanical and Tribological Assessment 激光表面包覆作为硬铬电镀的可持续替代方案——机械与摩擦学评估

STEEL RESEARCH INTERNATIONAL

IF2.5

2025-12-01

PREAI

Sen, Amitava Dhrubadas; Dutta Majumdar, Jyotsna; Singh, Shiv Brat; Manna, Indranil

Effect of beam oscillation on the microstructure, residual stress, mechanical and corrosion properties of electron beam welded AISI 304SS joints 电子束振荡对AISI 304SS接头微观结构、残余应力、力学性能和腐蚀性能的影响

Bulletin of Materials Science

IF2.1

2025-10-03

PREAI

Rathore, A.; Roy, G. G.; Singh, J. K.; Majumdar, J. Dutta

Studies on corrosion resistance (in 3.56 wt.% NaCl solution) of thermal-sprayed CoNiCrAlY (mechanically milled) on Inconel 718 substrate 在Inconel 718基体上热喷涂机械球磨CoNiCrAlY涂层在3.56 wt.% NaCl溶液中的耐腐蚀性能研究

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE

IF1.7

2025-09-01

PREAI

Dash, Annadaa Shankara; Tailor, Satish; Dutta Majumdar, Jyotsna

Evaluation of microstructure, mechanical and corrosion properties of IN718 superalloy components fabricated by laser direct energy deposition 通过激光直接能量沉积制备的IN718超级合金部件的微观结构、力学及腐蚀性能评价

Journal of Alloys and Compounds

IF6.3

2025-08-23

PREAI

Sharath Anishetty; Tapas Bera; Jyotsna Dutta Majumdar; Indranil Manna

Studies on Kinetics and Mechanism of Tribo-corrosion of in situ Laser Composite Surfaced Ti6Al4V using diode laser 关于采用二极管激光原位激光复合表面处理的Ti6Al4V的摩擦腐蚀动力学与机理研究

Tribology International

IF6.9

2025-07-28

PREAI

Bipasha Das; Sanjeev Kumar Srivastava; Indranil Manna; Jyotsna Dutta Majumdar

Phase evolution, densification behaviour and thermal and mechanical properties of Gd2O3 co-doped Y2O3 stabilised ZrO2 Gd2O3共掺杂Y2O3稳定的ZrO2的相演变、致密化行为及热学与力学性能

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2025-04-01

PREAI

Kumar, Manoj; Majumdar, Jyotsna Dutta

Nanosecond laser shock peening of titanium alloys (Ti6Al4V) and its invitro-tribocorrosion behavior

TRIBOLOGY INTERNATIONAL

IF6.9

2025-04-01

PREAI

Madapana, Dileep; Ramadas, Harikrishnan; Nath, Ashish Kumar; Majumdar, Jyotsna Dutta

Laser surface cladding of stainless steel to substitute environmentally hazardous hard chrome plating

JOURNAL OF MATERIALS SCIENCE

IF3.9

2024-12-02

PREAI

Sen, Amitava Dhrubadas; Majumdar, Jyotsna Dutta; Singh, Shiv Brat; Manna, Indranil

Role of heat treatment and laser shock peening on the electrochemical corrosion properties of 15-5 precipitation hardening stainless steel manufactured by laser powder bed fusion process

APPLIED SURFACE SCIENCE

IF6.9

2024-12-01

PREAI

Ramadas, Harikrishnan; Nath, Ashish Kumar; Madapana, Dileep; Majumdar, Jyotsna Dutta

Gradation of microstructure, phase aggregate, and mechanical properties with vertical depth of surface alloyed or melted zone synthesized by laser surface alloying or melting of Inconel 718

JOURNAL OF MATERIALS SCIENCE

IF3.9

2024-11-22

PREAI

Kumar, Manoj; Majumdar, Jyotsna Dutta; Manna, Indranil

Laser surface structuring of titanium alloy (Ti-6Al-4V) for improved tribocorrosion resistance for bio-implant applications

TRIBOLOGY INTERNATIONAL

IF6.9

2024-09-01

PREAI

Madapana, Dileep; Bathe, Ravi; Manna, Indranil; Majumdar, Jyotsna Dutta

Effect of process parameter on the flowability of nanocrystalline CoNiCrAlY powder synthesized by mechanical milling

PARTICUOLOGY

IF4.3

2024-09-01

PREAI

Dash, Annadaa Shankara; Manna, Indranil; Devapal, Deepa; Sharma, Sharad Chandra; Majumdar, Jyotsna Dutta

Laser material processing 激光材料加工

INTERNATIONAL MATERIALS REVIEWS

IF15.5

2024-07-29

247

PREAI

Majumdar, J. Dutta; Manna, I.

Titanium carbide (TiC) dispersed surface on titanium based alloy (Ti-13Nb-13Zr) by in-situ laser composite surfacing and its wear performance

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2024-07-01

PREAI

Bera, Tapas; Manna, Indranil; Majumdar, Jyotsna Dutta

研究方向