Mohd Zamin Jumaat - Publications, H-index & Citations

Mohd Zamin Jumaat

Universiti Malaya

73H指数

336论文数

1.7W被引数

收录论文 137

发表时间

Development of novel high damping rubber damper under axial compression dynamic load for energy-dissipation application

STRUCTURES

IF4.3

2023-12-01

PREAI

Teh, Tzyy Wooi; Tan, Chee Ghuan; Jumaat, Mohd Zamin

Feasibility Evaluation of Novel High-Damping Rubbers as Energy-Dissipation Material under Axial Dynamic Load for Damper Devices 新型高阻尼橡胶作为轴向动态载荷下减震装置耗能材料的可行性评估

BUILDINGS

IF3.1

2022-11-07

OAAI

Teh, Tzyy Wooi; Tan, Chee Ghuan; Jumaat, Mohd Zamin

Enunciation of embryonic palm oil clinker based geopolymer concrete and its engineering properties

CONSTRUCTION AND BUILDING MATERIALS

IF8

2022-02-01

PREAI

Bashar, Iftekhair Ibnul; Alengaram, U. Johnson; Jumaat, Mohd Zamin

Chemo-physico-mechanical characteristics of high-strength alkali-activated mortar containing non-traditional supplementary cementitious materials

JOURNAL OF BUILDING ENGINEERING

IF7.4

2021-12-01

PREAI

Sumesh, Mathialagan; Alengaram, U. Johnson; Jumaat, Mohd Zamin; Mo, Kim Hung; Singh, Ramesh; Nayaka, Ramappa Ramesh; Srinivas, Karthick

COMBINING EBR CFRP SHEET WITH PRESTRESSED NSM STEEL STRANDS TO ENHANCE THE STRUCTURAL BEHAVIOR OF PRESTRESSED CONCRETE BEAMS

management in engineering

IF3.7

2021-11-10

OAAI

Obaydullah, M.; Jumaat, Mohd Zamin; Alengaram, U. Johnson; Kabir, Md Humayun; Rashid, Muhammad Harunur

Investigation of structural characteristics of palm oil clinker based high-strength lightweight concrete comprising steel fibers

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2021-11-01

OAAI

Hosen, Md Akter; Shammas, Mahaad Issa; Shill, Sukanta Kumer; Jumaat, Mohd Zamin; Alengaram, U. Johnson; Ahmmad, Rasel; Althoey, Fadi; Islam, A. B. M. Saiful; Lin, Ying

Structural performance of masonry prisms, wallettes and walls containing high volume of industrial by-products-Sustainable housing perspective

CONSTRUCTION AND BUILDING MATERIALS

IF8

2021-10-01

PREAI

Nayaka, R. Ramesh; Alengaram, U. Johnson; Jumaat, Mohd Zamin; Fonseca, Fernando S.; Banerjee, Anish

Flexural Performance of RC Beams Strengthened with Externally-Side Bonded Reinforcement (E-SBR) Technique Using CFRP Composites

MATERIALS

IF3.2

2021-05-25

OAAI

Hosen, Md. Akter; Althoey, Fadi; Jumaat, Mohd Zamin; Alengaram, U. Johnson; Sulong, N. H. Ramli

Performance Evaluation of Engineering Properties, Radiation Shielding, and Sustainability of Hollow Masonry Blocks Produced Using a High Volume of Industrial By-Products

JOURNAL OF MATERIALS IN CIVIL ENGINEERING

IF3

2021-03-01

PREAI

Nayaka, Ramappa Ramesh; Alengaram, U. Johnson; Jumaat, Mohd Zamin; Yusoff, Sumiani; Ganasan, Reventheran

Behaviour of semi-rigid precast beam-to-column connection determined using static and reversible load tests

MEASUREMENT

IF5.6

2020-11-01

PREAI

Mokhtar, Rohani; Ibrahim, Zainah; Jumaat, Mohd Zamin; Abd Hamid, Zuhairi; Rahim, Ahmad Hazim Abdul

Serviceability assessment of fatigued reinforced concrete structures using a dynamic response technique

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2020-05-01

OAAI

Jamadin, Adiza; Ibrahim, Zainah; Jumaat, Mohd Zamin; Hosen, Md. Akter

Sustainable palm oil fuel ash mortar used as partial adhesive replacement in flexurally strengthened RC beams

CONSTRUCTION AND BUILDING MATERIALS

IF8

2019-11-01

PREAI

Hosen, Md Akter; Jumaat, Mohd Zamin; Alengaram, U. Johnson; Sulong, N. H. Ramli; Alsubari, Belal

Structural performance of lightweight concrete beams strengthened with side-externally bonded reinforcement (S-EBR) technique using CFRP fabrics

COMPOSITES PART B-ENGINEERING

IF14.2

2019-11-01

PREAI

Hosen, Md. Akter; Jumaat, Mohd Zamin; Alengaram, U. Johnson; Sulong, N. H. Ramli; Islam, A. B. M. Saiful

Performance evaluation of masonry grout containing high volume of palm oil industry by-products

JOURNAL OF CLEANER PRODUCTION

IF10

2019-05-01

PREAI

Nayaka, Ramappa Ramesh; Alengaram, U. Johnson; Jumaat, Mohd Zamin; Yusoff, Sumiani Binti; Ganasan, Reventheran

Microstructural and Strength Characteristics of High-Strength Mortar Using Nontraditional Supplementary Cementitious Materials 使用非传统辅助胶凝材料的高强度砂浆的微观结构和强度特性

JOURNAL OF MATERIALS IN CIVIL ENGINEERING

IF3

2019-04-01

PREAI

Sumesh, Mathialagan; Alengaram, U. Johnson; Jumaat, Mohd Zamin; Mo, Kim Hung

RETRACTION: Soft computing methodologies for estimation of energy consumption in buildings with different envelope parameters (Retraction of Vol 9, Pg 435, 2016)

ENERGY EFFICIENCY

IF4

2018-12-07

PREAI

Naji, Sareh; Shamshirband, Shahaboddin; Basser, Hamed; Alengaram, U. Johnson; Jumaat, Mohd Zamin; Amirmojahedi, Mohsen

Assessment on engineering properties and CO2 emissions of recycled aggregate concrete incorporating waste products as supplements to Portland cement

JOURNAL OF CLEANER PRODUCTION

IF10

2018-12-01

151

PREAI

Alnahhal, Mohammed Fouad; Alengaram, U. Johnson; Jumaat, Mohd Zamin; Abutaha, Fuad; Alqedra, Mamoun A.; Nayaka, Ramappa Ramesh

Microstructural investigation and durability performance of high volume industrial by-products-based masonry mortars

CONSTRUCTION AND BUILDING MATERIALS

IF8

2018-11-01

PREAI

Nayaka, Ramappa Ramesh; Alengaram, U. Johnson; Jumaat, Mohd Zamin; Yusoff, Sumiani Binti

Durability Indicators for Sustainable Self-Consolidating High-Strength Concrete Incorporating Palm Oil Fuel Ash

SUSTAINABILITY

IF3.3

2018-07-06

OAAI

Salam, Md. Abdus; Safiuddin, Md.; Jumaat, Mohd. Zamin

High volume cement replacement by environmental friendly industrial by-product palm oil clinker powder in cement - lime masonry mortar

JOURNAL OF CLEANER PRODUCTION

IF10

2018-07-01

PREAI

Nayaka, Ramappa Ramesh; Alengaram, U. Johnson; Jumaat, Mohd Zamin; Yusoff, Sumiani Binti; Alnahhal, Mohammed Fouad

研究方向