logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
R

R.D.K. Misra

department of biomedical engineering and department of mechanical

44H指数
185论文数
6.4K被引数
收录论文 115
发表时间
logo
The Significant Impact of the Evolution of Porous Architecture in Sol–Gel Processed-Nanoscale ZnO-Bearing Bioactive Glass in a Physiological Environment溶胶-凝胶法制备含纳米氧化锌生物活性玻璃的孔隙结构演变对其在生理环境中的显著影响
errInternational Journal of Nanomedicine
IF6.5
err2026-09-06
err0
errOAAI
errMahesh Malpani; Saikat Chattopadhyay; Raja Devesh Kumar Misra; Kamakhya Prakash Misra
err分享
err收藏
Effects of Tempering Temperature on Microstructure and Mechanical Property of High-Strength Low-Carbon Steel through Nb, V and Ti Microalloying通过Nb、V和Ti微合金化对高强度低合金钢回火温度对微观结构和力学性能的影响
errJournal of Materials Engineering and Performance
IF2
err2026-03-01
err5
PREAI
errCai, Guojun; Huang, Yanru; Misra, Raja Devesh Kumar
err分享
err收藏
Unveiling the crystallographic mechanism of molybdenum on enhancing hardenability in boron-containing steels揭示钼在硼钢中增强淬透性的晶体学机制
errMaterials Characterization
IF5.5
err2025-07-08
err0
PREAI
errZ.Q. Wang; Y.S. Yu; X.K. Li; C.J. Shang; R.D.K. Misra
err分享
err收藏
Microstructure evolution and tensile deformation behavior in a hot-rolled Ni-alloyed austenitic low-density alloy热轧Ni合金化奥氏体低密度合金中的微观结构演化和拉伸变形行为
errmaterials science materials in engineering
IF0
err2025-07-03
err0
PREAI
errXiaoliang Jia; Guhui Gao; Sicheng Jiang; R.D.K. Misra; Xiaolu Gui; Chun Feng
err分享
err收藏
Additive manufacturing of nickel-microalloyed titanium alloy: The significant impact of precipitation of Ti2Ni on mechanical properties镍微合金化钛合金的增材制造: Ti2Ni的析出对力学性能的显著影响
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2025-05-01
err0
PREAI
errWang, Ziqi; Pei, Yu; Yu, Hao; Liu, Shilong; Xiong, Zhihui; Jin, Xuejun; Misra, R. D. K.
err分享
err收藏
Microstructures and Properties of High Strength and Toughness Fe-Based Coatings Fabricated by Plasma Arc Deposition等离子弧沉积高强韧铁基涂层的组织与性能
errJOURNAL OF THERMAL SPRAY TECHNOLOGY
IF3.3
err2025-03-01
err0
PREAI
errZhang, Jian; Chen, Hongxuan; Pang, Xiaotong; Liu, Shilong; Misra, R. D. K.; Sun, Junhao
err分享
err收藏
Unveiling hot deformation behavior and microstructural evolution in Fe-21Mn-10Al-(5Ni)-C alloys揭示Fe-21Mn-10Al-(5Ni)-C合金的热变形行为和微观结构演变
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2025-01-01
err0
PREAI
errJia, Xiaoliang; Gao, Guhui; Jiang, Sicheng; Misra, R. D. K.; Gui, Xiaolu; Feng, Chun
err分享
err收藏
Interplay between deformation and fracture mechanism in gradient nanostructured austenitic stainless steel
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-11-01
err3
errOAAI
errWang, Y. G.; Chen, X.; Wei, L. L.; Misra, R. D. K.; Chen, J.
err分享
err收藏
Effects of intercritical annealing time on microstructure, tensile properties, and cryogenic toughness of newly designed ultra-low C low Ni Medium-Mn steel
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-09-01
err2
errOAAI
errYu, S.; Deng, Y. G.; Tao, Z.; Misra, R. D. K.; Yang, Y. P.
err分享
err收藏
Biocompatibility and mechanical behaviour of three-dimensional scaffolds for biomedical devices: process-structure-property paradigm
errINTERNATIONAL MATERIALS REVIEWS
IF15.5
err2024-07-29
err94
PREAI
errKumar, A.; Nune, K. C.; Murr, L. E.; Misra, R. D. K.
err分享
err收藏
Achieving high strength and high ductility of dual-phase steel via alternating lamellar microstructure通过交替的层状组织实现双相钢的高强度和高延展性
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-02-01
err20
PREAI
errNiu, Gang; Ding, Chao; Liu, Zhiying; Jia, Xiaohang; Chen, Haoxiu; Gong, Na; Wang, Yong; Cheh, Dennis TAN. Cheng; Misra, R. D. K.; Wu, Huibin
err分享
err收藏
Effect of austempering temperature on microstructure evolution, mechanical properties and wear resistance of carbon-free nano-bainite steel
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-09-01
err8
errOAAI
errWang, Enmao; He, Qianxi; Gu, Chen; Wang, Yong; Chen, Haoxiu; Che, Yingjian; Misra, R. D. K.; Gong, Na; Wu, Huibin; Niu, Gang
err分享
err收藏
Comparative study on effects of annealing temperature on microstructures and mechanical properties of high-Al low-Si steel
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-07-01
err3
errOAAI
errDeng, Y. G.; Yang, Y. P.; Misra, R. D. K.
err分享
err收藏
Crystallographic orientation and interface characteristics between in-situ TiC reinforcement and matrix before and after thermal deformation
errMATERIALS CHARACTERIZATION
IF5.5
err2023-01-01
err4
PREAI
errNing, Bo; Niu, Gang; Misra, R. D. K.; Gong, Na; Wu, Huibin
err分享
err收藏
Effect of Vanadium on the Microstructure and Mechanical Properties of 2100 MPa Ultra-High Strength High Plasticity Spring Steel Processed by a Novel Online Rapid-Induction Heat Treatment
errMETALS AND MATERIALS INTERNATIONAL
IF4
err2022-09-02
err12
errOAAI
errDai, Qi-Lei; Li, Kun; Meng, Kai-Ren; Fang, Zhou; Chen, Wen; Yang, Tian-Bao; Feng, Chi; Wu, Jin-Ming; Misra, R. D. K.
err分享
err收藏
Microstructure evolution and mechanical properties of bimodal grain sized 301 stainless steel strip induced by reverse phase transformation
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2022-03-01
err4
errOAAI
errWang, Yu; Hu, Yuxiong; Mao, Feng; Li, Jun; Zhou, Jie; Zhang, Shenghua; Wei, Liangliang; Misra, R. D. K.; Liu, Bin; Xu, Hong; Bai, Peikang
err分享
err收藏
Strength and ductility optimization of laser additive manufactured metastable β titanium alloy by tuning a phase by post heat treatment通过后热处理调整a相优化激光增材制造亚稳态 β 钛合金的强度和延展性
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2022-01-01
err31
PREAI
errPang, Xiaotong; Xiong, Zhihui; Yao, Chengwu; Sun, Junhao; Misra, R. D. K.; Li, Zhuguo
err分享
err收藏
High cycle fatigue behavior and microstructure of a high-speed rail material
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2021-09-01
err5
PREAI
errZhao, P.; Xu, Z.; Wang, M.; Misra, R. D. K.; Xie, G.; Du, F.; Xia, L.
err分享
err收藏
Enhanced carbon enrichment in austenite through introducing pre-existing austenite as a 'carbon container' in 0.2C-2Mn steel: The significant impact on microstructure and mechanical properties
errMATERIALS CHARACTERIZATION
IF5.5
err2021-06-01
err9
PREAI
errHu, B.; Guo, H.; Misra, R. D. K.; Shang, C. J.
err分享
err收藏
Effect of nickel on hardening behavior and mechanical properties of nanostructured bainite-austenite steels
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2021-06-01
err13
PREAI
errDong, H. Y.; Hu, C. Y.; Wu, G. H.; Wu, K. M.; Misra, R. D. K.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
王秋爽 封面图
王秋爽 (Qingsong Wang)
H 指数: 97 · 论文数: 941
L
Lai‐Chang Zhang
H 指数: 95 · 论文数: 524
C
Chris Bowen
H 指数: 87 · 论文数: 884
L
L.E. Murr
H 指数: 87 · 论文数: 973
B
Baptiste Gault
H 指数: 83 · 论文数: 931
查看更多