logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
U

Ulvi Şeker

manufacturing engineering

23H指数
138论文数
2.1K被引数
收录论文 21
发表时间
logo
Experimental and numerical characterization of Johnson–Cook plasticity and damage models for spheroidal graphite cast irons at high strain rates and elevated temperatures高应变率和高温度下球墨铸铁Johnson–Cook塑性及损伤模型的实验与数值表征
errInternational Journal of Solids and Structures
IF3.8
err2026-02-24
err0
PREAI
errBurak Özcan; Onur Cavusoglu; Umut Çalışkan; Murat Aydın; Ulvi Şeker
err分享
err收藏
Modeling the Asymmetric Thermo-Mechanical Behavior and Failure of Gray Cast Irons: An Experimental–Numerical Study with Separate Johnson–Cook Parameters模拟灰铸铁的非对称热-力学行为与失效：一项基于独立Johnson-Cook参数的实验-数值研究
errSimulation Modelling Practice and Theory
IF4.6
err2025-07-14
err0
PREAI
errBurak Özcan; Umut Çalışkan; Murat Aydın; Onur Çavuşoğlu; Ulvi Şeker
err分享
err收藏
Fatigue behavior and nonlinear life prediction of open-hole thermoplastic composite laminates with drilling-induced delamination开孔热塑性复合材料层合板在钻孔诱导分层条件下的疲劳行为与非线性行命预测
errENGINEERING FRACTURE MECHANICS
IF5.3
err2025-05-01
err0
PREAI
errIlhan, Cagri; Seker, Ulvi
err分享
err收藏
Optimization of drilling parameters to minimize delamination in (PEKK/CFRP) thermoplastic polymer matrix composites for aerospace applications
errJOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
IF3.4
err2024-10-10
err1
PREAI
errIlhan, Cagri; Cavus, Yafes; Katmer, Sukran; Seker, Ulvi
err分享
err收藏
Slot milling of titanium alloy with hexagonal boron nitride and minimum quantity lubrication and multi-objective process optimization for energy efficiency
errJOURNAL OF CLEANER PRODUCTION
IF10
err2020-06-01
err31
PREAI
errOsman, Khaled Ali; Yilmaz, Volkan; Unver, Hakki Ozgur; Seker, Ulvi; Kilic, Sadik Engin
err分享
err收藏
The effects of the feed rate on the cutting tool stresses in machining of Inconel 718
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2008-01-01
err40
PREAI
errKose, Erdogan; Kurt, Abdullah; Seker, Ulvi
err分享
err收藏
Determination of spring-back of stainless steel sheet metal in V bending dies
errMATERIALS & DESIGN
IF7.9
err2008-01-01
err47
PREAI
errTekaslan, Oezguer; Gerger, Nedim; Seker, Ulvi
err分享
err收藏
Investigation of chip-back temperature during machining depending on cutting parameters
errMATERIALS & DESIGN
IF7.9
err2007-01-01
err51
PREAI
errKorkut, Ihsan; Boy, Mehmet; Karacan, Ismail; Seker, Ulvi
err分享
err收藏
Evaluation of machinability of austempered ductile irons in terms of cutting forces and surface quality
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2006-04-01
err70
PREAI
errSeker, U; Hasirci, H
err分享
err收藏
Determining springback amount of steel sheet metal has 0.5 mm thickness in bending dies
errMATERIALS & DESIGN
IF7.9
err2006-01-01
err34
PREAI
errTekaslan, Ö; Seker, U; Özdemir, A
err分享
err收藏
Design and construction of a dynamometer to evaluate the influence of cutting tool rake angle on cutting forces
errMATERIALS & DESIGN
IF7.9
err2006-01-01
err13
PREAI
errGunay, Mustafa; Seker, Ulvi; Sur, Gokhan
err分享
err收藏
Experimental investigation of the effect of cutting tool rake angle on main cutting force
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2005-07-01
err75
PREAI
errGünay, M; Korkut, I; Aslan, E; Seker, U
err分享
err收藏
The effect of chamfer angle of polycrystalline cubic boron nitride cutting tool on the cutting forces and the tool stresses in finishing hard turning of AISI 52100 steel
errMATERIALS & DESIGN
IF7.9
err2005-06-01
err48
PREAI
errKurt, A; Seker, U
err分享
err收藏
CBN cutting tool wear during machining of particulate reinforced MMCs颗粒增强mmc加工过程中的CBN刀具磨损
errWEAR
IF6.1
err2004-11-01
err94
PREAI
errCiftci, I; Turker, M; Seker, U
err分享
err收藏
Investigation of the effect of rake angle on main cutting force
errINTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
IF18.8
err2004-07-01
err77
PREAI
errGünay, M; Aslan, E; Korkut, I; Seker, U
err分享
err收藏
Determination of optimum cutting parameters during machining of AISI 304 austenitic stainless steel
errMATERIALS & DESIGN
IF7.9
err2004-06-01
err169
PREAI
errKorkut, I; Kasap, M; Ciftci, I; Seker, U
err分享
err收藏
Evaluation of tool wear when machining SiCp-reinforced Al-2014 alloy matrix composites
errMATERIALS & DESIGN
IF7.9
err2004-05-01
err146
PREAI
errCiftci, I; Turker, M; Seker, U
err分享
err收藏
Effect of feed rate on surface roughness in abrasive waterjet cutting applications
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2004-04-01
err112
PREAI
errAkkurt, A; Kulekci, MK; Seker, U; Ercan, F
err分享
err收藏
The effect of feed rate on the cutting forces when machining with linear motion
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2004-03-01
err26
PREAI
errSeker, U; Kurt, A; Çiftçi, I
err分享
err收藏
The effect of alloying elements on surface roughness and cutting forces during machining of ductile iron合金元素对球墨铸铁加工表面粗糙度和切削力的影响
errMATERIALS & DESIGN
IF7.9
err2003-02-01
err37
PREAI
errSeker, U; Çiftçi, I; Hasirci, H
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
M
Mustafa Günay
H 指数: 30 · 论文数: 134
H
Hakkı Özgür Ünver
H 指数: 20 · 论文数: 61
S
S. Engin Kılıç
H 指数: 19 · 论文数: 49
M
Mehmet Türker
H 指数: 19 · 论文数: 118
A
Adnan Akkurt
H 指数: 15 · 论文数: 75
查看更多