Mohsen Ostad Shabani - Publications, H-index & Citations

Mohsen Ostad Shabani

materials & energy research center (merc)

37H指数

151论文数

3.7K被引数

收录论文 31

发表时间

The influence of SPS holding time on the corrosion performance of NiCrBSi coatings: A comparative study with HVOF SPS保温时间对NiCrBSi涂层耐腐蚀性能的影响：与HVOF的对比研究

Results in Engineering

IF7.9

2026-03-02

OAAI

Hootan Biukani; Mansour Razavi; Mohsen Ostad Shabani; Mahboobeh Azadi

Effects of sintering temperature and sintering aids on the microstructure and magnetic properties of Ti and Mn doped lithium ferrites 烧结温度和烧结助剂对Ti和Mn掺杂锂铁氧体微观结构和磁性能的影响

Ceramics International

IF5.6

2026-03-01

PREAI

Osareh, Parisa; Zakeri, Mohammad; Rahimipour, Mohammad R.; Shabani, Mohsen Ostad

Construction of poly(vinylimidazole-allylamine)-grafted graphene oxide nanosheets decorated with magnetic copper sulfide as a mesoporous, reusable adsorbent for efficient removal of heavy metal ions from aqueous media

Applied Materials Today

IF6.9

2026-01-23

PREAI

Saba Moradi; Mahsasadat Miralinaghi; Elham Moniri; Shadab Shahsavari; Mohsen Shabani

Elemental diffusion influenced by process parameters in LPBF of IN625 on IN738 substrate: A focused investigation of Ti behavior and its role in defect formation (cracks and pores)LPBF工艺中IN625在IN738基板上的元素扩散受工艺参数影响：对Ti行为及其在缺陷形成（裂纹和气孔）中作用的聚焦研究

Journal of Materials Research and Technology

IF6.6

2025-08-26

OAAI

Amirhossein Riazi; Seyed Hossein Razavi; Alireza Khavandi; Mostafa Amirjan; Mohsen Ostad Shabani; Hossein Davarzani

A new approach to the reasons for dependency of defects formation to the process parameters in laser powder bed fusion of IN625 on the IN738LC substrate 一种新的方法来解决IN738LC衬底上IN625的激光粉末床熔融中缺陷形成对工艺参数的依赖性

JOURNAL OF ADVANCED JOINING PROCESSES

IF4

2025-06-01

OAAI

Riazi, Amirhossein; Razavi, Seyed Hossein; Khavandi, Alireza; Amirjan, Mostafa; Shabani, Mohsen Ostad; Davarzani, Hossein

Investigation on TiS2 electrode material for intercalation batteries, namely Li, Na, Mg, Al, K, Ca, and Zn -ion cells: A DFT study 用于插层电池的TiS2电极材料的研究，即Li，Na，Mg，Al，K，Ca和Zn离子电池: DFT研究

RESULTS IN CHEMISTRY

IF4.2

2024-01-01

OAAI

Safaeipour, Sepideh; Kalantarian, Mohammad Mahdi; Shabani, Mohsen Ostad; Faeghinia, Aida

Boosted ultrasound-sunlight-driven removal of organic pollutant over double Z-scheme plasmonic ZnO-Cu-CuO/g-C3N4 nanophotocatalyst: design via in-situ co-precipitation hybrid with various sonication powers

MATERIALS TODAY SUSTAINABILITY

IF7.9

2023-12-01

PREAI

Abbasi, E.; Haghighi, M.; Shabani, M.; Niyati, A.; Mahboob, S.

Ag/Bi4O5I2/reduced graphene oxide as a visible-light active nanophotocatalyst for pharmaceutical pollutants from wastewater

MATERIALS TODAY SUSTAINABILITY

IF7.9

2023-12-01

PREAI

Niyati, A.; Haghighi, M.; Shabani, M.

Application of the combined CFD and swarm intelligence for optimization of baffles number in a mixer-settler

JOURNAL OF THE INDIAN CHEMICAL SOCIETY

IF3.4

2021-12-01

PREAI

Shabani, Mohsen Ostad; Baghani, Amir; Rahimipour, Mohammad Reza; Razavi, Mansour; Zakeri, Mohammad; Heydari, Fatemeh

Multilayered diamond mechanical seal rings under biodiesel lubrication and the full sealing conditions of pressurized water

WEAR

IF6.1

2017-08-01

PREAI

Shabani, M.; Carrapichano, J. M.; Oliveira, F. J.; Silva, R. F.

Searching for the superior solution to the population-based optimization problem: Processing of the wear resistant commercial AA6061 AMCs

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS

IF3.9

2014-04-22

PREAI

Mazahery, Ali; Shabani, Mohsen Ostad; Elrefaei, Ahmed

Numerical and experimental investigations of weld pool geometry in GTA welding of pure aluminum

JOURNAL OF CENTRAL SOUTH UNIVERSITY

IF4.4

2014-03-01

PREAI

Faraji, A. H.; Bahmani, A.; Goodarzi, M.; Seyedein, S. H.; Shabani, M. O.

Optimized processing power and trainability of neural network in numerical modeling of Al Matrix nano composites

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2013-10-01

PREAI

Tofigh, Ali Asghar; Rahimipour, Mohammad Reza; Shabani, Mohsen Ostad; Alizadeh, Mehdi; Heydari, Fatemeh; Mazahery, Ali; Razavi, Mansour

Efficient optimum solution for high strength Al alloys matrix composites

CERAMICS INTERNATIONAL

IF5.6

2013-09-01

PREAI

Tofigh, Ali Asghar; Shabani, Mohsen Ostad

Fabrication of AMCs by spray forming: Setting of cognition and social parameters to accelerate the convergence in optimization of spray forming process

CERAMICS INTERNATIONAL

IF5.6

2013-07-01

PREAI

Shabani, Mohsen Ostad; Mazahery, Ali

Application of the Extrusion to Increase the Binding between the Ceramic Particles and the Metal Matrix: Enhancement of Mechanical and Tribological Properties

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

IF14.3

2013-05-01

PREAI

Mazahery, Ali; Shabani, Mohsen Ostad

Enhancing the tribological performance under biodiesel lubrication using CVD diamond coated parts

WEAR

IF6.1

2013-04-01

PREAI

Almeida, F. A.; Maru, M. M.; Shabani, M.; Oliveira, F. J.; Silva, R. F.; Achete, C. A.

The synthesis of the particulates Al matrix composites by the compocasting method

CERAMICS INTERNATIONAL

IF5.6

2013-03-01

PREAI

Shabani, Mohsen Ostad; Mazahery, Ali

Application of GA to optimize the process conditions of Al Matrix nano-composites

COMPOSITES PART B-ENGINEERING

IF14.2

2013-02-01

PREAI

Shabani, Mohsen Ostad; Mazahery, Ali

Synthesis of TiC Master Alloy in Nanometer Scale by Mechanical Milling

MATERIALS AND MANUFACTURING PROCESSES

IF4.7

2012-12-01

PREAI

Razavi, Mansour; Ghaderi, Razieh; Rahimipour, Mohammad Reza; Shabani, Mohsen Ostad

研究方向