Do-Sik Shim - Publications, H-index & Citations

Do-Sik Shim

Korea Maritime and Ocean University

24H指数

165论文数

2.3K被引数

收录论文 51

发表时间

Manufacturing and tribological performance of DED-fabricated grid-textured surfaces under boundary lubrication DED制造网格纹理表面的边界润滑摩擦学性能

International Journal of Advanced Manufacturing Technology

IF3.1

2026-09-16

PREAI

Hyo-Jeong Kang; Kwang-Yong Shin; Ki-Yong Lee; Do-Sik Shim

Geometry-dependent mechanical behavior of mechanically interlocked metal–polymer structures fabricated by hybrid PBF–VPP additive manufacturing 机械互锁金属-聚合物结构的几何形状依赖性力学行为：由混合PBF–VPP增材制造制备

Journal of Manufacturing Processes

IF6.8

2026-09-11

PREAI

Min-Seong Ko; Do-Sik Shim

Study on laser remelting for pore mitigation in nickel–aluminum bronze (NAB) fabricated by directed energy deposition 激光重熔对通过定向能量沉积制备的镍铝青铜（NAB）中孔隙减少的研究

Optics & Laser Technology

IF0

2025-10-29

PREAI

Changliang Yao; Kwang-Yong Shin; Do-Sik Shim

Cryogenic properties during quasi-static and dynamic loading of high-manganese steel (13, 18.5, and 24 wt% Mn) fabricated by directed energy deposition 高锰钢（13、18.5和24 wt% Mn）在准静态和动态载荷下的低温性能，该钢由定向能量沉积制备而成

Materials Today Communications

IF4.5

2025-09-20

PREAI

Hyeong-Jin Ha; Han-Byeol Park; Kwang-Yong Shin; Wook-Jin Lee; Sang-hu Park; Do-Sik Shim

A Review of the Quality Control and Mechanical Properties in Hybrid Additive Manufacturing 混合增材制造中质量控制与力学性能综述

International Journal of Precision Engineering and Manufacturing

IF3.6

2025-09-09

PREAI

Sazzad Hossain Emon; Do Sik Shim

Microstructural and interfacial characteristics in repair of nickel-aluminum bronze by in-situ synthesis of Cu-Al alloys via directed energy deposition 通过定向能量沉积原位合成Cu-Al合金修复镍铝青铜的微观结构与界面特性

ADDITIVE MANUFACTURING

IF11.1

2025-05-01

PREAI

Yao, C; He, S; Lee, KY; Shin, KY; Shim, D

Microstructure and corrosion resistance manipulation of directed energy deposited Cu-Al alloys with varied Al contents 定向能量沉积的不同Al含量的cu-al合金的微观结构和耐蚀性控制

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2025-03-01

OAAI

Yao, Changliang; He, Shanshan; Lee, Ki-Yong; Shim, Do-Sik; Shin, Kwang-Yong

Enhancing high-temperature wear resistance of cladded Inconel 718 through hybrid of directed energy deposition with ultrasonic nano-crystal surface modification

MATERIALS CHARACTERIZATION

IF5.5

2024-11-01

PREAI

Jo, Yeong-Kwan; Shim, Do-Sik; Park, Sang-Hu

Effects of Ultrasonic Nanocrystal Surface Modification on Surface Hardening Mechanism and Wear Behavior of Additively Manufactured High-Manganese Steel

METALS AND MATERIALS INTERNATIONAL

IF4

2024-08-03

PREAI

Park, Han-Byeol; Ha, Hyeong-Jin; Cho, Jong-Rae; Shim, Do-Sik

Microstructural transformation and corrosion-cavitation behavior of ultrasonic nanocrystal surface modified nickel aluminum bronze (NAB)

MATERIALS TODAY COMMUNICATIONS

IF4.5

2024-08-01

PREAI

Yao, Changliang; He, Shanshan; Lee, Ki-Yong; Shin, Kwang-Yong; Shim, Do-Sik

Microstructural evolution and wear resistance of composite WC10%-Ni60AA cermet built by laser directed energy deposition

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-05-01

OAAI

He, Shanshan; Yao, Changliang; Shin, Kwang-Yong; Park, Sanghu; Shim, Do -sik

Microstructure and wear behaviors of a WC10%-Ni60AA cermet coating synthesized by laser-directed energy deposition

SURFACE & COATINGS TECHNOLOGY

IF6.1

2024-02-01

PREAI

He, Shanshan; Yao, Changliang; Shin, Kwang-Yong; Park, Sanghu; Shim, Do-sik

Effect of heat transfer in substrate on microstructure and tensile behavior of deposits built by directed energy deposition

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-01-01

OAAI

Choi, Kook-Hwa; Cho, Jong-Rae; Shim, Do-Sik

Effect of substrate preheating on the microstructure and bending behavior of WC-Inconel 718 composite coating synthesized via laser directed energy deposition

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2023-09-01

PREAI

He, Shanshan; Park, Sanghu; Shim, Do-sik; Yao, Changliang; Li, Mingchuan; Wang, Shuanglong

Wear behavior of aluminum-matrix particle (TiH2 and ZrH2)-reinforced composite foam additively manufactured using directed energy deposition

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-07-01

OAAI

Kim, Hwa-Jeong; Shin, Gwang-Yong; Lee, Ki-Yong; Shim, Do-Sik

Compressive properties of AlSi10Mg foams additively manufactured with different foaming agents TiH2 and ZrH2

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2023-05-01

PREAI

Kim, Hwa Jeong; Shim, Do Sik

Mechanical and Thermal Properties of the High Thermal Conductivity Steel (HTCS) Additively Manufactured via Powder-Fed Direct Energy Deposition

MICROMACHINES

IF3

2023-04-18

OAAI

Son, Jong-Youn; Lee, Ki-Yong; Shin, Gwang-Yong; Choi, Chang-Hwan; Shim, Do-Sik

Deposition characterization of high-manganese (13Mn) steel built via directed energy deposition and its wear behavior

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-01-01

OAAI

Park, Han-Byeol; Shin, Gwang Yong; Lee, Ki-Yong; Shim, Do-Sik

Post-building successive treatments using surface laser remelting and ultrasonic nanocrystalline surface modification for rough surface built via directed energy deposition

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2022-12-01

PREAI

Cho, Seung-Yeong; Shin, Gwang-Yong; Lee, Ki-Yong; Shim, Do-Sik

Phenomenological Modeling of Distortions and Residual Stresses in Direct Energy Deposition of AISI M4 High Speed Tool Steel on D2 Substrate

METALS AND MATERIALS INTERNATIONAL

IF4

2022-11-10

PREAI

Ha, Kyeongsik; Moon, Young Hoon; Kim, Tae Hwan; Baek, Gyeong Yun; Lee, Ki Yong; Shim, Do-sik; Lee, Wookjin

研究方向