Datong Zhang - Publications, H-index & Citations

Datong Zhang

kyushu institute of technology

31H指数

83论文数

2.6K被引数

收录论文 46

发表时间

Capillary-driven flow in open rectangular microchannels: Roles of geometry and liquid properties 毛细驱动流在开放矩形微通道中的流动：几何形状和液体性质的作用

International Journal of Heat and Mass Transfer

IF5.8

2026-03-03

PREAI

Jianchen Bao; Datong Zhang; Gyoko Nagayama

Hot-pressing temperature-dependent microstructures and mechanical properties of high-Zn Al alloy processed via rapid solidification and thermo-mechanical fabrication 热压温度依赖的、通过快速凝固和热-机械加工制备的高-Zn Al合金微观结构与力学性能

materials science materials in engineering

IF0

2025-08-26

PREAI

Xianna Meng; Ziye Huang; Yi Wang; Datong Zhang

Static recrystallization kinetics and texture evolution of low-temperature extruded Mg−Zn−Ca alloy during annealing 低温挤压Mg−Zn−Ca合金在退火过程中的静态再结晶动力学和织构演变

Transactions of Nonferrous Metals Society of China

IF4.7

2025-05-01

OAAI

Hua WANG; Da-tong ZHANG; Cheng QIU; Dao-lun CHEN

Enhancing strength-ductility synergy in heterostructured magnesium alloys by tailoring heterogeneity levels

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2025-03-01

PREAI

Liu, L.; Wang, H.; Zhang, D. T.; Qiu, C.; Chen, D. L.

Microstructure and mechanical properties of a low-alloyed Mg-Zn-Al-Ca - alloy: Effect of extrusion speed

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-11-01

OAAI

Liu, L.; Wang, H.; Zhang, D. T.; Qiu, C.; Chen, D. L.

A comparative study on microstructures of a high-Zn AlZnMgCuZr alloy fabricated by casting and melt spinning

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-09-01

OAAI

Meng, Xianna; Qiu, Cheng; Chen, Wanglin; Zhang, Datong

Effect of Na 3 AlF 6 contents in refining flux on 3D characteristics of pore and mechanical properties of recycled Al-Mg-Si alloy

MATERIALS TODAY COMMUNICATIONS

IF4.5

2024-06-01

PREAI

Cai, Yuehua; Song, Dongfu; Yang, Dongyang; Zhao, Yuliang; Ke, Bin; Zhang, Datong; Zhang, Weiwen

Effects of Fe content on the 3D morphology of Fe-rich phases and mechanical properties of cast Al-Mg-Si alloy

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2024-06-01

PREAI

Cai, Yuehua; Song, Dongfu; Zhao, Yuliang; Yang, Dongyang; Zhang, Datong; Zhang, Weiwen

Microstructure and tensile properties of a low-alloyed magnesium alloy: effect of extrusion temperature

JOURNAL OF MATERIALS SCIENCE

IF3.9

2023-08-29

PREAI

Wang, H.; Zhang, D. T.; Qiu, C.; Zhang, W. W.; Chen, D. L.

Effect of post-weld heat treatments on the microstructure and mechanical properties of underwater friction stir welded joints of 7003-T4/6060-T4 aluminium alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2023-01-01

PREAI

Dong, Jialiang; Zhang, Datong; Zhang, Weiwen; Cao, Genghua; Qiu, Cheng

Excellent High-Strain-Rate Superplasticity of Fine-Grained ZK60 Magnesium Alloy Produced by Submerged Friction Stir Processing

ADVANCED ENGINEERING MATERIALS

IF3.3

2022-01-20

PREAI

Cai, Jianheng; Wang, Hua; Qiu, Cheng; Cao, Genghua; Zhang, Datong

Achieving high damping capacity and strength simultaneously in a high-zinc aluminum alloy via melt spinning and hot extrusion

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2022-01-01

PREAI

Meng, Xianna; Zhang, Datong; Zhang, Weiwen; Qiu, Cheng; Chen, Daolun

Microstructure and mechanical properties of a rapidly-solidified and extruded Al-13.2Zn-2.5Mg-1.2Cu-0.2Zr alloy and its aging hardening response at 120 °C

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2021-10-01

PREAI

Meng, Xianna; Zhang, Datong; Zhang, Weiwen; Qiu, Cheng; Liang, Guangxing; Chen, Junjie

Stretch Formability of an AZ61 Alloy Plate Prepared by Multi-Pass Friction Stir Processing

MATERIALS

IF3.2

2021-06-09

OAAI

Luo, Xicai; Liu, Haolin; Kang, Limei; Lin, Jielin; Liu, Yifei; Zhang, Datong; Li, Dongyang; Chen, Daolun

Interactions between ZDDP and an oil-soluble ionic liquid additive

TRIBOLOGY INTERNATIONAL

IF6.9

2021-06-01

PREAI

Yang, Shuyan; Zhang, Datong; Wong, Janet S. S.; Cai, Meirong

Influence of solution treatment on microstructures and mechanical properties of a naturally-aged Al-27Zn-1.5Mg-1.2Cu-0.08Zr aluminum alloy 固溶处理对自然时效Al-27Zn-1.5Mg-1.2Cu-0.08Zr铝合金组织和力学性能的影响

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2021-01-01

PREAI

Meng, Xianna; Zhang, Datong; Zhang, Weiwen; Qiu, Cheng; Liang, Guangxing; Chen, Junjie

EBSD study of underwater friction stir welded AA7003-T4 and AA6060-T4 dissimilar joint

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2020-05-01

OAAI

Dong, Jialiang; Zhang, Datong; Luo, Xicai; Zhang, Weiwen; Zhang, Wen; Qiu, Cheng

Microstructure and mechanical properties of a high-Zn aluminum alloy prepared by melt spinning and extrusion

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2020-04-01

PREAI

Meng, Xianna; Zhang, Datong; Zhang, Weiwen; Qiu, Cheng; Liang, Guangxing; Chen, Junjie

Microstructure and Properties of Nano-Hydroxyapatite Reinforced WE43 Alloy Fabricated by Friction Stir Processing

MATERIALS

IF3.2

2019-09-16

OAAI

Cao, Genghua; Zhang, Lu; Zhang, Datong; Liu, Yixiong; Gao, Jixiang; Li, Weihua; Zheng, Zhenxing

Microstructure and properties of underwater friction stir-welded 7003-T4/6060-T4 aluminum alloys

JOURNAL OF MATERIALS SCIENCE

IF3.9

2019-05-23

PREAI

Dong, Jialiang; Zhang, Datong; Zhang, Weiwen; Zhang, Wen; Qiu, Cheng

研究方向