Full elastic properties characterization of wood by ultrasound using a single sampleWOOD SCIENCE AND TECHNOLOGYIF32024-01-101PRE
A novel three-dimensional model for the prediction of ultrasonic velocity in wood considering its orthotropyWOOD SCIENCE AND TECHNOLOGYIF32023-04-203PRE
Assessment of moisture content profile in Douglas-fir wood using electrical resistivity-based tomographyCONSTRUCTION AND BUILDING MATERIALSIF82023-02-013OAAI
Long-term creep behavior of timber columns: Experimental and numerical protocolsENGINEERING STRUCTURESIF6.42023-01-018OAAI
Hybrid numerical method for the ultrasonic wave propagation velocity in orthotropic materialsWOOD SCIENCE AND TECHNOLOGYIF32022-10-294PRE
Fatigue process analysis of aged asphalt concrete from two-point bending test using acoustic emission and curve fitting techniquesCONSTRUCTION AND BUILDING MATERIALSIF82021-09-0117OAAI
Fatigue damage monitoring and analysis of aged asphalt concrete using acoustic emission techniqueROAD MATERIALS AND PAVEMENT DESIGNIF32021-04-1510PREAI
Influence of temperature in a mass transfer simulation: application to woodWOOD SCIENCE AND TECHNOLOGYIF32020-06-207OAAI
A new analytical generalization of the J and G-theta integrals for planar cracks in a three-dimensional mediumTHEORETICAL AND APPLIED FRACTURE MECHANICSIF5.62018-04-0112OAAI
On the crack tip propagation monitoring within wood material: Cluster analysis of acoustic emission data compared with numerical modellingCONSTRUCTION AND BUILDING MATERIALSIF82017-12-0130PREAI
Temperature variation effect on crack growth in orthotropic medium: Finite element formulation for the viscoelastic behavior in thermal cracked wood-based materialsINTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURESIF3.82017-06-0113OAAI
Numerical and experimental approaches to characterize the mass transfer process in wood elementsWOOD SCIENCE AND TECHNOLOGYIF32017-02-247OAAI
Characterization of the coupled hygrothermal behavior of unfired clay masonries: Numerical and experimental aspectsBUILDING AND ENVIRONMENTIF7.62016-12-0125PREAI
Mixed-mode fracture analysis combining mechanical, thermal and hydrological effects in an isotropic and orthotropic material by means of invariant integralsTHEORETICAL AND APPLIED FRACTURE MECHANICSIF5.62016-10-0116PREAI
Determination of timber material fracture parameters using mark tracking methodCONSTRUCTION AND BUILDING MATERIALSIF82016-01-018PREAI
Numerical finite element formulation of the 3D linear viscoelastic material model: Complex Poisson's ratio of bituminous mixturesARCHIVES OF CIVIL AND MECHANICAL ENGINEERINGIF4.42015-09-0114PREAI
J-integral evaluation in cracked wood specimen using the mark tracking methodWOOD SCIENCE AND TECHNOLOGYIF32012-06-1715PREAI
Finite element model for crack growth process in concrete bituminousADVANCES IN ENGINEERING SOFTWAREIF5.72012-02-0117PREAI
Simulation of the effect of material properties and interface roughness on the stress distribution in thermal barrier coatings using finite element method材料性能和界面粗糙度对热障涂层应力分布影响的有限元模拟MATERIALS & DESIGNIF7.92010-02-01252PREAI