logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
X

Xiaoqing Jiang

Beijing University of Technology

26H指数
87论文数
1.7K被引数
收录论文 42
发表时间
logo
Experimental investigation of material flow behavior during refill friction stir spot welding材料填充摩擦搅拌点焊过程中材料流动行为的实验研究
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2025-03-01
err0
PREAI
errChen, Shujun; Li, Zhipeng; Xiao, Jun; Pu, Juan; Han, Yang; Gai, Shengnan; Wang, Dawei; Jiang, Xiaoqing
err分享
err收藏
Origins and optimization mechanisms of periodic microstructures in Al-Cu alloys fabricated by wire arc additive manufacturing combined with Interlayer Friction Stir Processing
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-11-01
err0
PREAI
errYuan, Tao; Xu, Daqing; Jiang, Xiaoqing; Chen, Shujun
err分享
err收藏
Microstructure and strengthening mechanism of TIG welded joint of AZ31 alloy based on FSP technique
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2024-08-01
err4
PREAI
errWang, Shuwen; Yuan, Tao; Liu, Linao; Wang, Lei; Jiang, Xiaoqing; Shan, He; Chen, Shujun; Zhao, Pengjing
err分享
err收藏
Evolution of microstructure and enhanced mechanical properties of dissimilar Al and Mg joints with Cu interlayer fabricated by friction stir welding
errSCIENCE AND TECHNOLOGY OF WELDING AND JOINING
IF3.7
err2024-05-22
err1
PREAI
errLiu, Yongyong; Wang, Ziqian; Jiang, Xiaoqing; Yuan, Tao
err分享
err收藏
Inhomogeneity and anisotropy of Al-Zn-Mg-Cu alloy manufactured by wire arc additive manufacturing: microstructure, mechanical properties, stress corrosion cracking susceptibility电弧增材制造al-zn-mg-cu合金的不均匀性和各向异性: 微观组织，力学性能，应力腐蚀开裂敏感性
errVIRTUAL AND PHYSICAL PROTOTYPING
IF8.8
err2024-05-08
err4
errOAAI
errWang, Shuwen; Chen, Shujun; Yuan, Tao; Jiang, Xiaoqing; Zhao, Pengjing; Shan, He; Zhang, Hanxu; Ding, Wutong
err分享
err收藏
Insights into microstructure evolution and fracture mechanisms of welded joints of high strength steel patchwork components高强钢拼布构件焊接接头的组织演变和断裂机理的见解
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2024-05-01
err4
PREAI
errWang, Shuwen; Chen, Shujun; Yuan, Tao; Jiang, Xiaoqing; Zhao, Pengjing; Ding, Wutong; Li, Xiaoxu
err分享
err收藏
Digital Twin Virtual Welding Approach of Robotic Friction Stir Welding Based on Co-Simulation of FEA Model and Robotic Model基于FEA模型与机器人模型联合仿真的机器人搅拌摩擦焊数字孪生虚拟焊接方法
errSENSORS
IF3.5
err2024-02-04
err4
errOAAI
errChen, Shujun; Zong, Guanchen; Kang, Cunfeng; Jiang, Xiaoqing
err分享
err收藏
Crystallographic characteristics and mechanical behavior of laser welded joints of hot roll bending parts热弯件激光焊接接头的晶体学特征和力学行为
errMATERIALS CHARACTERIZATION
IF5.5
err2024-01-01
err0
PREAI
errWang, Shuwen; Chen, Shujun; Yuan, Tao; Jiang, Xiaoqing; Zhao, Pengjing; Ding, Wutong
err分享
err收藏
Enhanced strength-plasticity of 2319 Al-Cu alloy formed by hybrid interlayer friction stir processing and wire-arc additive manufacturing混合层间搅拌摩擦加工和电弧增材制造2319 al-cu合金的增强强度-塑性
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2023-12-01
err17
PREAI
errYuan, Tao; Xu, Daqing; Jiang, Xiaoqing; Zhao, Pengjing; Chen, Shujun
err分享
err收藏
Exit-hole repairing in 7475 aluminium alloy welded joints based on refill friction stir processing
errSCIENCE AND TECHNOLOGY OF WELDING AND JOINING
IF3.7
err2023-11-01
err3
PREAI
errYuan, Tao; Kang, Shaoqian; Jiang, Xiaoqing; Zhao, Pengjing
err分享
err收藏
Effect of thermal cycles on the microstructure and properties of the Al-Zn-Mg-Cu alloy during wire-arc additive manufacturing
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2022-12-01
err29
PREAI
errXu, Min; Chen, Shujun; Yuan, Tao; Jiang, Xiaoqing; Zhang, Hongda
err分享
err收藏
Material flow and microstructure evolution on the flow path of friction stir lap welded aluminium alloy
errSCIENCE AND TECHNOLOGY OF WELDING AND JOINING
IF3.7
err2022-09-01
err7
PREAI
errHan, Yang; Jiang, Xiaoqing; Yuan, Tao; Chen, Shujun; Gong, Wentao; Li, Xiaoxu; Yu, Zhanliang
err分享
err收藏
Microstructure and properties research of Al-Zn-Mg-Cu alloy with high strength and high elongation fabricated by wire arc additive manufacturing
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2022-09-01
err41
PREAI
errRen, Xuelei; Jiang, Xiaoqing; Yuan, Tao; Zhao, Xiaohu; Chen, Shujun
err分享
err收藏
Al-Zn-Mg-Cu alloy with both high strength and high plasticity fabricated with wire arc additive manufacturing
errSCIENCE AND TECHNOLOGY OF WELDING AND JOINING
IF3.7
err2022-08-30
err9
PREAI
errYuan, Tao; Ren, Xuelei; Chen, Shujun; Jiang, Xiaoqing
err分享
err收藏
Numerical simulation of the stationary shoulder friction stir welding of Ti-6Al-4V
errJOURNAL OF MATERIALS SCIENCE
IF3.9
err2022-04-04
err8
PREAI
errJiang Xiaoqing; Jiang Wang; Yuan Tao; Chen Shujun; Wang Lei; Liu Yongyong
err分享
err收藏
Enhanced mechanical properties of dissimilar Al and Mg alloys fabricated by pulse current assisted friction stir welding
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-04-01
err21
PREAI
errXiaoqing, Jiang; Yongyong, Liu; Tao, Yuan; Shujun, Chen; Lei, Wang; Wang, Jiang
err分享
err收藏
Investigation on liquation cracks of dissimilar magnesium alloy welds using the circular-patch experiment and numerical simulation
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-03-01
err6
PREAI
errYuan, Tao; Zhang, Hongda; Jiang, Xiaoqing; Chen, Shujun; Xu, Min; Liu, Xusheng
err分享
err收藏
Effect of SiC addition on microstructure and properties of Al-Mg alloy fabricated by powder and wire cold metal transfer process
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2022-03-01
err24
errOAAI
errLiu, Kun; Jiang, Xiaoqing; Chen, Shujun; Yuan, Tao; Yan, Zhaoyang
err分享
err收藏
Material flow and viscous slips during stationary shoulder friction stir welding of Ti6Al4V
errSCIENCE AND TECHNOLOGY OF WELDING AND JOINING
IF3.7
err2022-02-08
err5
PREAI
errJiang, Wang; Jiang, Xiaoqing; Yuan, Tao; Chen, Shujun; Liu, Yongyong; Liu, Xusheng
err分享
err收藏
Grain refinement and property improvements of Al-Zn-Mg-Cu alloy by heterogeneous particle addition during wire and arc additive manufacturing
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2022-01-01
err53
errOAAI
errYuan, Tao; Ren, Xuelei; Chen, Shujun; Jiang, Xiaoqing
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
刘志峰 封面图
刘志峰 (Zhifeng Liu)
H 指数: 82 · 论文数: 882
王
王江 (Jiang Wang)
H 指数: 66 · 论文数: 921
M
Min Xu
H 指数: 52 · 论文数: 816
Z
Zhenyu Qi
H 指数: 38 · 论文数: 116
陈
陈书军 (Shujun Chen)
H 指数: 37 · 论文数: 316
查看更多