logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
J

Jacques Kruger

stellenbosch university

25H指数
54论文数
3.1K被引数
收录论文 28
发表时间
logo
Numerically optimised filament surface topology towards maximum bond strength in 3D printed concrete数值优化的纤维表面拓扑结构，以实现3D打印混凝土中的最大结合强度
errStructures
IF4.3
err2025-10-31
err0
errOAAI
errJean-Pierre Mostert; Jacques Kruger
err分享
err收藏
3D printed concrete pinned beam-column connection development3D打印混凝土销接梁-柱节点开发
errJournal of Building Engineering
IF7.4
err2025-07-03
err0
errOAAI
errBjorn Ter Haar; Jacques Kruger; Gideon van Zijl
err分享
err收藏
Interaction of reinforcement, process, and form in Digital Fabrication with Concrete
errCEMENT AND CONCRETE RESEARCH
IF13.1
err2024-12-01
err0
errOAAI
errKloft, Harald; Sawicki, Bartlomiej; Bos, Freek; Doerrie, Robin; Freund, Niklas; Gantner, Stefan; Gebhard, Lukas; Hack, Norman; Ivaniuk, Egor; Kruger, Jacques; Kaufmann, Walter; Mata-Falcon, Jaime; Mechtcherine, Viktor; Mirjan, Ammar; Wolfs, Rob; Lowke, Dirk
err分享
err收藏
On the micro- and meso-structure and durability of 3D printed concrete elements3D打印混凝土构件的细观结构及耐久性研究
errCEMENT AND CONCRETE RESEARCH
IF13.1
err2024-11-01
err0
PREAI
errVan Tittelboom, Kim; Mohan, Manu K.; Savija, Branko; Keita, Emmanuel; Ma, Guowei; Du, Hongjian; Kruger, Jacques; Caneda-Martinez, Laura; Wang, Li; Bekaert, Michiel; Wangler, Timothy; Wang, Zhendi; Mechtcherine, Viktor; Roussel, Nicolas
err分享
err收藏
Off-site 3D printed concrete beam design and fabrication异地3D打印混凝土梁设计与制作
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2024-07-01
err3
errOAAI
errTer Haar, Bjorn; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Improving interlayer bond in 3D printed concrete through induced thermo-hydrokinetics
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2023-08-01
err12
PREAI
errMunemo, Rue; Kruger, Jacques; van Zijl, Gideon P. A. G.
err分享
err收藏
Off-site construction with 3D concrete printing3D混凝土打印的非现场施工
errAUTOMATION IN CONSTRUCTION
IF11.5
err2023-08-01
err19
errOAAI
errTer Haar, Bjorn; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Rivet reinforcement for concrete printing
errADDITIVE MANUFACTURING
IF11.1
err2023-04-01
err8
PREAI
errBester, Frederick; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Mitigating early age cracking in 3D printed concrete using fibres, superabsorbent polymers, shrinkage reducing admixtures, B-CSA cement and curing measures
errCEMENT AND CONCRETE RESEARCH
IF13.1
err2022-09-01
err48
PREAI
errMoelich, G. M.; Kruger, P. J.; Combrinck, R.
err分享
err收藏
A plastic shrinkage cracking risk model for 3D printed concrete exposed to different environments不同环境下3D打印混凝土塑性收缩开裂风险模型
errCEMENT & CONCRETE COMPOSITES
IF13.1
err2022-07-01
err34
PREAI
errMoelich, G. M.; Kruger, P. J.; Combrinck, R.
err分享
err收藏
Evaluating the effects of porosity on the mechanical properties of extrusion-based 3D printed concrete评估孔隙率对基于挤出的3D打印混凝土力学性能的影响
errCEMENT AND CONCRETE RESEARCH
IF13.1
err2022-03-01
err94
PREAI
errvan den Heever, Marchant; du Plessis, Anton; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
A mechanistic evaluation relating microstructural morphology to a modified Mohr-Griffith compression-shear constitutive model for 3D printed concrete将微观结构形态与3D打印混凝土的改进的mohr-griffith压剪本构模型相关的机械评估
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2022-03-01
err10
PREAI
errvan den Heever, Marchant; du Plessis, Anton; Bester, Frederick; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Numerical modelling strategies for reinforced 3D concrete printed elements
errADDITIVE MANUFACTURING
IF11.1
err2022-02-01
err33
PREAI
errvan den Heever, Marchant; Bester, Frederick; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Mechanical characterisation for numerical simulation of extrusion-based 3D concrete printing基于挤压的3D混凝土打印数值模拟的力学表征
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2021-12-01
err47
PREAI
errvan den Heever, Marchant; Bester, Frederick; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Modelling the interlayer bond strength of 3D printed concrete with surface moisture
errCEMENT AND CONCRETE RESEARCH
IF13.1
err2021-12-01
err73
PREAI
errMoelich, Gerrit Marius; Kruger, Jacques; Combrinck, Riaan
err分享
err收藏
The effect of restrained early age shrinkage on the interlayer bond and durability of 3D printed concrete
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2021-11-01
err56
PREAI
errMoelich, G. M.; Kruger, P. J.; Combrinck, R.
err分享
err收藏
Juxtaposing fresh material characterisation methods for buildability assessment of 3D printable cementitious mortars
errCEMENT & CONCRETE COMPOSITES
IF13.1
err2021-07-01
err58
errOAAI
errBos, F. P.; Kruger, P. J.; Lucas, S. S.; van Zijl, G. P. A. G.
err分享
err收藏
Rheology and application of buoyant foam concrete for digital fabrication
errCOMPOSITES PART B-ENGINEERING
IF14.2
err2021-06-01
err47
PREAI
errCho, Seung; Kruger, Jacques; van Rooyen, Algurnon; van Zijl, Gideon
err分享
err收藏
An experimental study of the behavior of 3D printed concrete at elevated temperatures
errFIRE SAFETY JOURNAL
IF3.3
err2021-03-01
err57
PREAI
errCicione, Antonio; Kruger, Jacques; Walls, Richard S.; Van Zijl, Gideon
err分享
err收藏
A compendious review on lack-of-fusion in digital concrete fabrication
errADDITIVE MANUFACTURING
IF11.1
err2021-01-01
err94
PREAI
errKruger, Jacques; van Zijl, Gideon
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
V
Viktor Mechtcherine
H 指数: 85 · 论文数: 591
N
Nicolas Roussel
H 指数: 75 · 论文数: 410
李旺 封面图
李旺 (Wang Li)
H 指数: 55 · 论文数: 2.8K
A
Anton du Plessis
H 指数: 51 · 论文数: 342
K
Kim Van Tittelboom
H 指数: 49 · 论文数: 252
查看更多