logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
G

Gideon van Zijl

stellenbosch university

41H指数
212论文数
5.8K被引数
收录论文 28
发表时间
logo
Perspectives on waste materials and by-products integration into 3D concrete printing (3DCP)关于废弃物和副产品整合到3D混凝土打印（3DCP）的展望
errCement and Concrete Research
IF13.1
err2026-09-10
err0
PREAI
errVislavath Haripan; Sahil Surehali; Janitha Migunthanna; Silvia Reissig; A.V. Rahul; Narayanan Neithalath; Adewumi John Babafemi; Gideon van Zijl; Patmanathan Rajeev; Biranchi Panda; Viktor Mechtcherine; Nicolas Roussel; Jianzhuang Xiao; Haoran Liu; Manu Santhanam
err分享
err收藏
3D printed concrete pinned beam-column connection development3D打印混凝土销接梁-柱节点开发
errJournal of Building Engineering
IF7.4
err2025-07-03
err0
errOAAI
errBjorn Ter Haar; Jacques Kruger; Gideon van Zijl
err分享
err收藏
A review of shrinkage and restrained shrinkage cracking in 3D concrete printing3D混凝土打印中收缩及约束收缩开裂的综述
errJournal of Building Engineering
IF7.4
err2025-06-26
err0
errOAAI
errHeinrich Els; Gideon van Zijl; Wibke de Villiers
err分享
err收藏
Soil-Structure Interaction Analysis of Transition Zone Deformations due to Imposed Abutment Displacement Cycles in an Integral Bridge
errJOURNAL OF BRIDGE ENGINEERING
IF3.5
err2025-04-01
err0
PREAI
errDreyer, T.; Fronek, A.; Fataar, H.; Mpye, G. D.; Skorpen, S.; Kearsley, E.; van Zijl, G.
err分享
err收藏
Time-dependent behaviour of 3D printed fibre-reinforced limestone calcined clay cement concrete under sustained loadings
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2024-10-01
err1
errOAAI
errIbrahim, Kamoru; van Zijl, Gideon; Babafemi, Adewumi John
err分享
err收藏
Off-site 3D printed concrete beam design and fabrication异地3D打印混凝土梁设计与制作
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2024-07-01
err3
errOAAI
errTer Haar, Bjorn; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Fresh and strength properties of 3D printable concrete mixtures utilising a high volume of sustainable alternative binders
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2024-03-01
err9
errOAAI
errColyn, Markus; van Zijl, Gideon; Babafemi, Adewumi John
err分享
err收藏
Validated simulation of thermal performance of phase change material infused recycled brick aggregate in 3D printed concrete
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2023-11-01
err3
errOAAI
errChristen, Heidi; van Zijl, Gideon; de Villiers, Wibke; Moelich, Migael
err分享
err收藏
Off-site construction with 3D concrete printing3D混凝土打印的非现场施工
errAUTOMATION IN CONSTRUCTION
IF11.5
err2023-08-01
err19
errOAAI
errTer Haar, Bjorn; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Rivet reinforcement for concrete printing
errADDITIVE MANUFACTURING
IF11.1
err2023-04-01
err8
PREAI
errBester, Frederick; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Improving building thermal comfort through passive design-An experimental analysis of phase change material 3D printed concrete
errJOURNAL OF CLEANER PRODUCTION
IF10
err2023-03-01
err15
PREAI
errChristen, Heidi; van Zijl, Gideon; de Villiers, Wibke
err分享
err收藏
Phase change material infused recycled brick aggregate in 3D printed concrete相变材料在3D打印混凝土中注入再生砖骨料
errHELIYON
IF3.6
err2022-11-01
err19
errOAAI
errChristen, Heidi; Cho, Seung; van Zijl, Gideon; de Villiers, Wibke
err分享
err收藏
A roadmap for quality control of hardening and hardened printed concrete硬化和硬化印刷混凝土的质量控制路线图
errCEMENT AND CONCRETE RESEARCH
IF13.1
err2022-07-01
err79
errOAAI
errMechtcherine, Viktor; van Tittelboom, Kim; Kazemian, Ali; Kreiger, Eric; Nematollahi, Behzad; Nerella, Venkatesh Naidu; Santhanam, Manu; de Schutter, Geert; Zijl, Gideon Van; Lowke, Dirk; Ivaniuk, Egor; Taubert, Markus; Bos, Freek
err分享
err收藏
Foam stability of 3D printable foamed concrete
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2022-04-01
err31
errOAAI
errCho, Seung; van Rooyen, Algurnon; Kearsley, Elsabe; van Zijl, Gideon
err分享
err收藏
Evaluating the effects of porosity on the mechanical properties of extrusion-based 3D printed concrete评估孔隙率对基于挤出的3D打印混凝土力学性能的影响
errCEMENT AND CONCRETE RESEARCH
IF13.1
err2022-03-01
err94
PREAI
errvan den Heever, Marchant; du Plessis, Anton; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
A mechanistic evaluation relating microstructural morphology to a modified Mohr-Griffith compression-shear constitutive model for 3D printed concrete将微观结构形态与3D打印混凝土的改进的mohr-griffith压剪本构模型相关的机械评估
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2022-03-01
err10
PREAI
errvan den Heever, Marchant; du Plessis, Anton; Bester, Frederick; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Numerical modelling strategies for reinforced 3D concrete printed elements
errADDITIVE MANUFACTURING
IF11.1
err2022-02-01
err33
PREAI
errvan den Heever, Marchant; Bester, Frederick; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Mechanical characterisation for numerical simulation of extrusion-based 3D concrete printing基于挤压的3D混凝土打印数值模拟的力学表征
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2021-12-01
err47
PREAI
errvan den Heever, Marchant; Bester, Frederick; Kruger, Jacques; van Zijl, Gideon
err分享
err收藏
Computational assessment of thermal performance of 3D printed concrete wall structures with cavities
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2021-09-01
err57
PREAI
errMarais, Hannelie; Christen, Heidi; Cho, Seung; De Villiers, Wibke; Van Zijl, Gideon
err分享
err收藏
Rheology and application of buoyant foam concrete for digital fabrication
errCOMPOSITES PART B-ENGINEERING
IF14.2
err2021-06-01
err47
PREAI
errCho, Seung; Kruger, Jacques; van Rooyen, Algurnon; van Zijl, Gideon
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
J
Jianzhuang Xiao
H 指数: 87 · 论文数: 540
V
Viktor Mechtcherine
H 指数: 85 · 论文数: 591
G
Geert De Schutter
H 指数: 80 · 论文数: 887
N
Narayanan Neithalath
H 指数: 65 · 论文数: 293
A
Anton du Plessis
H 指数: 51 · 论文数: 342
查看更多