logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
J

J. Ramkumar

Indian Institute of Technology Kanpur

35H指数
233论文数
4.4K被引数
收录论文 46
发表时间
logo
Microstructure and enhanced high-temperature wear properties of TiC reinforced Co-Cr-W metal matrix composite (MMC) coatings fabricated by laser claddingTiC增强Co-Cr-W金属基复合材料（MMC）涂层在激光熔覆制备下的微观结构及高温磨损性能提升
errJournal of Alloys and Compounds
IF6.3
err2025-09-08
err0
PREAI
errV. Tiwari; A. Kumar; M. Sarkar; J. Ramkumar; M. Gupta; K. Mondal; J. Jain; M.K. Singh; S.S. Singh
err分享
err收藏
Enhanced mechanical properties and microstructure of TiC reinforced Stellite 6 metal matrix composites (MMCs) via laser cladding additive manufacturing
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2025-01-01
err1
PREAI
errTiwari, V.; Mandal, V.; Sarkar, M.; Kumar, A.; Bhagyaraj, J.; Singh, Manjesh K.; Mukherjee, S.; Mondal, K.; Ramkumar, J.; Jain, J.; Huang, E. -Wen; Singh, S. S.
err分享
err收藏
Influence of MWCNTs, ZnO, and boric acid nanomaterial blend on the tribological and thermal properties of lithium grease
errTRIBOLOGY INTERNATIONAL
IF6.9
err2024-04-01
err3
PREAI
errPrasad, Deepak Kumar; Tiwari, Saurabh; Amarnath, M.; Chelladurai, H.; Vardhaman, B. S. Ajay; Suresh, B.; Ramkumar, J.; Gupta, Munish Kumar
err分享
err收藏
Effect of ground tire rubber media's viscoelasticity and flow passage geometry on the abrasive flow finishing of helical gear研磨轮胎橡胶介质的粘弹性和流道几何形状对斜齿轮磨料流光整加工的影响
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2023-09-01
err5
PREAI
errAnsari, Irfan Ahmad; Kar, Kamal K.; Ramkumar, J.
err分享
err收藏
Selective electrochemical boring of thin-walled tubes: Methodology, mechanism, and characteristics
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2023-08-01
err2
PREAI
errSharma, Vyom; Kumar, Naveen; Ramkumar, J.; Singh, Amandeep; Jegaraj, J. John Rozario
err分享
err收藏
Fabrication of ex-situ TiN reinforced IN718 composites using laser powder bed fusion (L-PBF): Experimental characterization and high-fidelity numerical simulations使用激光粉末床熔融 (l-pbf) 制造异位TiN增强IN718复合材料: 实验表征和高保真数值模拟
errCERAMICS INTERNATIONAL
IF5.6
err2023-05-01
err8
PREAI
errMandal, Vijay; Tripathi, Pragya; Sharma, Shashank; Jayabalan, Bhagyaraj; Mukherjee, Subrata; Singh, Sudhanshu S.; Ramkumar, J.
err分享
err收藏
Tribological and vibration characteristics of the palm-mineral blend as a sustainable lubricant in steel-steel contacts
errBIOMASS CONVERSION AND BIOREFINERY
IF4.1
err2022-12-13
err3
PREAI
errKamarapu, Santhosh Kumar; Muniyappa, Amarnath; Bheemappa, Suresha; Vardhaman, B. S. Ajay; Ramkumar, J.; Rangappa, Dinesh
err分享
err收藏
3-D fabrication using electrical discharge-milling: an overview
errMATERIALS AND MANUFACTURING PROCESSES
IF4.7
err2022-05-28
err18
PREAI
errSingh, Mahavir; Jain, V. K.; Ramkumar, J.
err分享
err收藏
Effect of addition of strong oxidizer and temperature on the cavitation erosion resistance of different microstructures made from a high carbon steel
errWEAR
IF6.1
err2022-04-01
err6
PREAI
errRajput, Arun; Ramkumar, J.; Mondal, K.
err分享
err收藏
Facile synthesis of Al substituted Cu-ferrite infused reduced graphene oxide (rGO) nanohybrid for improving microwave absorption at gigahertz frequencies
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2022-04-01
err32
PREAI
errSingh, Sandeep Kumar; Penke, Yaswanth K.; Ramkumar, J.; Akhtar, M. J.; Kar, Kamal K.
err分享
err收藏
A study on selective laser melting (SLM) of TiC and B4C reinforced IN718 metal matrix composites (MMCs)
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2022-04-01
err50
PREAI
errMandal, Vijay; Tripathi, Pragya; Kumar, Ashwani; Singh, Sudhanshu S.; Ramkumar, J.
err分享
err收藏
Cavitation behavior of various microstructures made from a C-Mn eutectoid steel
errWEAR
IF6.1
err2021-12-01
err6
PREAI
errRajput, Arun; Ramkumar, J.; Mondal, K.
err分享
err收藏
On altering the wetting behaviour and corrosion resistance of a large metallic surface area by wire electrochemical texturing通过线电化学纹理改变大金属表面积的润湿行为和耐腐蚀性
errSURFACE & COATINGS TECHNOLOGY
IF6.1
err2021-09-01
err6
PREAI
errSharma, Vyom; Patel, Divyansh Singh; Gyanprakash, Maurya; Ramkumar, J.
err分享
err收藏
Sustainable Electrochemical Micromachining Using Atomized Electrolyte Flushing使用雾化电解质冲洗的可持续电化学微加工
errJOURNAL OF THE ELECTROCHEMICAL SOCIETY
IF3.3
err2021-04-27
err7
PREAI
errPatel, Divyansh Singh; Sharma, Vyom; Jain, V. K.; Ramkumar, J.
err分享
err收藏
Effect of pearlitic morphology with varying fineness on the cavitation erosion behavior of eutectoid rail steel
errULTRASONICS SONOCHEMISTRY
IF9.7
err2021-03-01
err22
errOAAI
errRajput, Arun; Ramkumar, J.; Mondal, K.
err分享
err收藏
Investigations into machining accuracy and quality in wire electrochemical micromachining under sinusoidal and triangular voltage pulse condition
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2021-02-01
err21
PREAI
errSharma, Vyom; Patel, Divyansh Singh; Agrawal, Vishal; Jain, V. K.; Ramkumar, J.
err分享
err收藏
A comprehensive review of free-form surface milling- Advances over a decade
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2021-02-01
err59
PREAI
errMali, Rahul A.; Gupta, T. V. K.; Ramkumar, J.
err分享
err收藏
Microscratching and fretting of electro-co-deposited Cr-based composite coatings with BN, graphene, and diamond reinforcements
errJOURNAL OF MATERIALS SCIENCE
IF3.9
err2021-01-03
err15
PREAI
errTripathi, Pragya; Ramkumar, J.; Balani, K.
err分享
err收藏
Finish turning of hardened bearing steel using textured PcBN tools
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2020-12-01
err19
PREAI
errLaw, M.; Karthik, R.; Sharma, S.; Ramkumar, J.
err分享
err收藏
Micro-texturing on free-form surfaces using flexible-electrode through-mask electrochemical micromachining使用柔性电极通过掩模电化学微加工在自由曲面上进行微纹理化
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2020-08-01
err34
PREAI
errPatel, Divyansh Singh; Agrawal, Vishal; Ramkumar, J.; Jain, V. K.; Singh, Gaganpreet
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
M
Munish Kumar Gupta
H 指数: 78 · 论文数: 511
V
V.K. Jain
H 指数: 63 · 论文数: 517
B
Bikramjit Basu
H 指数: 55 · 论文数: 366
K
Kamal K. Kar
H 指数: 53 · 论文数: 453
K
Kantesh Balani
H 指数: 49 · 论文数: 302
查看更多