Janez Kopač - Publications, H-index & Citations

Janez Kopač

University of Ljubljana

43H指数

256论文数

6.8K被引数

收录论文 39

发表时间

Valorization of poultry manure into biochar, bio-oil and gas product by co-pyrolysis with residual biomass and the effects analysis of the feedstock on products yield and their characteristics

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

IF6.2

2025-03-01

PREAI

David, E.; Kopac, J.

Survey on Antioxidants Used as Additives to Improve Biodiesel's Stability to Degradation through Oxidation

MOLECULES

IF4.6

2023-11-24

OAAI

David, Elena; Kopac, Janez

Assessment of the Catalytic Performances of Nanocomposites Materials Based on 13X Zeolite, Calcium Oxide and Metal Zinc Particles in the Residual Biomass Pyrolysis Process

NANOMATERIALS

IF4.3

2022-10-31

OAAI

David, Elena; Kopac, Janez

Efficient removal of tar from gas fraction resulting from thermochemical conversion of biomass using coal fly ash-based catalysts

RENEWABLE ENERGY

IF9.1

2021-06-01

PREAI

David, E.; Kopac, J.

Upgrading the characteristics of the bio-oil obtained from rapeseed oil cake pyrolysis through the catalytic treatment of its vapors

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

IF6.2

2019-08-01

PREAI

David, E.; Kopac, J.

Pyrolysis of rapeseed oil cake in a fixed bed reactor to produce bio-oil

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

IF6.2

2018-09-01

PREAI

David, E.; Kopac, J.

Analysis of the influence of nitrogen phase and surface heat transfer coefficient on cryogenic machining performance

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2016-07-01

PREAI

Pusavec, F.; Lu, T.; Courbon, C.; Rech, J.; Aljancic, U.; Kopac, J.; Jawahir, I. S.

Sustainable machining of high temperature Nickel alloy - Inconel 718: part 2-chip breakability and optimization

JOURNAL OF CLEANER PRODUCTION

IF10

2015-01-01

PREAI

Pusavec, Franci; Deshpande, Ashish; Yang, Shu; M'Saoubi, Rachid; Kopac, Janez; Dillon, Oscar Wiliam, Jr.; Jawahir, I. S.

Innovation investment and economic performance in transition economies: Evidence from Slovenia

INNOVATION-ORGANIZATION & MANAGEMENT

IF1.8

2014-12-17

PREAI

Likar, Borut; Kopac, Janez; Fatur, Peter

Activated carbons derived from residual biomass pyrolysis and their CO2 adsorption capacity 生物质热解活性炭及其CO2吸附性能研究

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

IF6.2

2014-11-01

PREAI

David, E.; Kopac, J.

Sustainable machining of high temperature Nickel alloy - Inconel 718: part 1 - predictive performance models

JOURNAL OF CLEANER PRODUCTION

IF10

2014-10-01

151

PREAI

Pusavec, Franci; Deshpande, Ashish; Yang, Shu; M'Saoubi, Rachid; Kopac, Janez; Dillon, Oscar W., Jr.; Jawahir, I. S.

Tribological behaviour of Ti6Al4V and Inconel718 under dry and cryogenic conditions-Application to the context of machining with carbide tools

TRIBOLOGY INTERNATIONAL

IF6.9

2013-10-01

143

PREAI

Courbon, C.; Pusavec, F.; Dumont, F.; Rech, J.; Kopac, J.

Aluminum recovery as a product with high added value using aluminum hazardous waste 利用铝危险废物回收铝作为高附加值产品

JOURNAL OF HAZARDOUS MATERIALS

IF11.3

2013-10-01

PREAI

David, E.; Kopac, J.

Characterisation of friction and heat partition coefficients at the tool-work material interface in cutting

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2013-01-01

147

PREAI

Rech, J.; Arrazola, P. J.; Claudin, C.; Courbon, C.; Pusavec, F.; Kopac, J.

Cryogenic machining as an alternative turning process of normalized and hardened AISI 52100 bearing steel

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2012-12-01

PREAI

Bicek, M.; Dumont, F.; Courbon, C.; Pusavec, F.; Rech, J.; Kopac, J.

Hydrolysis of aluminum dross material to achieve zero hazardous waste 铝渣材料水解实现零危险废物

JOURNAL OF HAZARDOUS MATERIALS

IF11.3

2012-03-01

111

PREAI

David, E.; Kopac, J.

Investigation of machining performance in high pressure jet assisted turning of Inconel 718: A numerical model

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2011-11-01

PREAI

Courbon, C.; Sajn, V.; Kramar, D.; Rech, J.; Kosel, F.; Kopac, J.

Surface integrity in cryogenic machining of nickel based alloy-Inconel 718

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2011-04-01

287

PREAI

Pusavec, F.; Hamdi, H.; Kopac, J.; Jawahir, I. S.

The influence of cryogenic cooling on process stability in turning operations 低温冷却对车削过程稳定性的影响

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2011-01-01

PREAI

Pusavec, F.; Govekar, E.; Kopac, J.; Jawahir, I. S.

Transitioning to sustainable production - part II: evaluation of sustainable machining technologies

JOURNAL OF CLEANER PRODUCTION

IF10

2010-08-01

275

PREAI

Pusavec, Franci; Kramar, Davorin; Krajnik, Peter; Kopac, Janez

研究方向