Bo Xiao

Tianjin University

H指数:20

被引数:1,278

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

Creep-induced heterogeneous precipitation of Laves phase with two morphologies in tempered martensite ferritic steels

MATERIALS RESEARCH LETTERS

IF7.9

2023-05-062

Additive manufacturing of martensitic stainless steel matrix composites with simultaneously enhanced strength-ductility and corrosion resistance

具有同时增强的强度-延展性和耐腐蚀性的马氏体不锈钢基复合材料的增材制造

COMPOSITES PART B-ENGINEERING

IF14.2

2022-04-0138

PRE

Reversed austenite in additively manufactured martensitic stainless steel

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2022-02-0119

PRE

Deep insights on the creep behavior and mechanism of a novel G115 steel: Micromechanical modeling and experimental validation

对新型G115钢的蠕变行为和机理的深入了解: 微机械建模和实验验证

INTERNATIONAL JOURNAL OF PLASTICITY

IF12.8

2021-12-0131

PRE

Dynamic friction coefficient between tire and compacted asphalt mixtures using tire-pavement dynamic friction analyzer

使用轮胎路面动态摩擦分析仪测量轮胎与压实沥青混合料之间的动态摩擦系数

CONSTRUCTION AND BUILDING MATERIALS

IF8

2020-10-0125

PREAI

New perspectives on the grain boundary misorientation angle dependent intergranular corrosion of polycrystalline nickel-based 625 alloy

CORROSION SCIENCE

IF8.5

2020-08-0149

PREAI

Solute-dislocation interactions and creep-enhanced Cu precipitation in a novel ferritic-martensitic steel

ACTA MATERIALIA

IF9.3

2020-08-0174

PREAI

Crack growth behavior, fracture mechanism, and microstructural evolution of G115 steel under creep-fatigue loading conditions

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

IF9.4

2019-10-0120

PREAI

Microstructure and mechanical properties of vacuum brazed CBN abrasive segments with tungsten carbide reinforced Cu-Sn-Ti alloys

CERAMICS INTERNATIONAL

IF5.6

2019-06-0124

PREAI

Stress state and stress-induced microstructural evolution around the crack tip of G115 steel after dwell-fatigue crack propagation

乏力裂纹扩展后G115钢裂纹尖端周围的应力状态和应力诱导的微观结构演变

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2019-05-2711

PREAI

Cyclic damage behavior of Sanicro 25 alloy at 700 °C: Dispersed damage and concentrated damage

Sanicro 25合金在700 °C下的循环损伤行为: 分散损伤和集中损伤

INTERNATIONAL JOURNAL OF PLASTICITY

IF12.8

2019-05-0124

PREAI

Strain dependent constitutive model and microstructure evolution of a novel 9Cr martensitic steel during high-temperature deformation

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2019-05-0111

PREAI

A piecewise constitutive model, microstructure and fracture mechanism of a nickel-based superalloy 750H during high-temperature tensile deformation

JOURNAL OF MATERIALS SCIENCE

IF3.9

2019-04-0315

PREAI

Investigating crack propagation behavior and damage evolution in G115 steel under combined steady and cyclic loads

THEORETICAL AND APPLIED FRACTURE MECHANICS

IF5.6

2019-04-0120

PREAI

A physical-based yield strength model for the microstructural degradation of G115 steel during long-term creep

G115钢在长期蠕变过程中的微观结构退化的基于物理的屈服强度模型

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2019-02-0142

PREAI

Life, dislocation evolution, and fracture mechanism of a 41Fe-25.5Ni-23.5Cr alloy during low cycle fatigue at 700 °C

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2019-02-0129

PREAI

Deformation-mechanism-based creep model and damage mechanism of G115 steel over a wide stress range

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2019-01-0138

PREAI

Transient creep behavior of a novel tempered martensite ferritic steel G115 (vol 716, pg 284, 2018)

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2019-01-012

PREAI

Creep-fatigue crack growth behavior of G115 steel under different hold time conditions

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2018-11-0125

PREAI

Microstructure and mechanical performance of welded joint between a novel heat-resistant steel and Inconel 617 weld metal

MATERIALS CHARACTERIZATION

IF5.5

2018-05-0143

PREAI

Bo Xiao

个人简介

教育背景

工作经历

荣誉奖项

研究方向