J.M. Gloaguen - Publications, H-index & Citations

J.M. Gloaguen

centrale lille

27H指数

104论文数

2.7K被引数

收录论文 26

发表时间

How stress triaxiality affects cavitation damage in high-density polyethylene: Experiments and constitutive modeling 应力三轴性如何影响高密度聚乙烯中的空化损伤: 实验和本构模型

POLYMER TESTING

IF6

2021-08-01

OAAI

Mesbah, Amar; Elmeguenni, Mohamed; Yan, Zhu; Zairi, Fahmi; Ding, Ning; Gloaguen, Jean-Michel

Repeated equal-channel angular extrusion of polypropylene: Processing routes and back-pressure influence

MATERIALS TODAY COMMUNICATIONS

IF4.5

2021-03-01

OAAI

Boulahia, Ramdane; Zairi, Fahmi; Voznyak, Yuri; Gloaguen, Jean-Michel

Plasticity and thermally-induced recovery in polycarbonate

MECHANICS OF MATERIALS

IF4.1

2020-09-01

OAAI

Cherief, Mohammed Nadhir D.; Zairi, Fahmi; Ding, Ning; Gloaguen, Jean-Michel; Nait-Abdelaziz, Moussa; Benguediab, Mohamed

Multiscale Observation of the Fatigue-Induced Damage Mechanisms in Carbon-Black Filled Styrene-Butadiene Rubber

Macromolecular Materials and Engineering

IF4.6

2020-06-30

PREAI

Dinari, Amina; Chaabane, Makram; Benameur, Tarek; Guo, Qiang; Gloaguen, Jean-Michel; Zairi, Fahmi

A micromechanical model taking into account the contribution of α- and γ-crystalline phases in the stiffening of polyamide 6-clay nanocomposites: A closed-formulation including the crystal symmetry

COMPOSITES PART B-ENGINEERING

IF14.2

2014-08-01

PREAI

Anoukou, K.; Zairi, F.; Nait-Abdelaziz, M.; Zaoui, A.; Qu, Z.; Gloaguen, J. M.; Lefebvre, J. M.

Molecular chain orientation in polycarbonate during equal channel angular extrusion: Experiments and simulations

COMPUTATIONAL MATERIALS SCIENCE

IF3.3

2014-04-01

PREAI

Bouaksa, F.; Rodas, C. Ovalle; Zairi, F.; Stoclet, G.; Nait-Abdelaziz, M.; Gloaguen, J. M.; Tamine, T.; Lefebvre, J. M.

A visco-hyperelastic damage model for cyclic stress-softening, hysteresis and permanent set in rubber using the network alteration theory

INTERNATIONAL JOURNAL OF PLASTICITY

IF12.8

2014-03-01

PREAI

Ayoub, G.; Zairi, F.; Nait-Abdelaziz, M.; Gloaguen, J. M.; Kridli, G.

Experiments and modeling of high-crystalline polyethylene yielding under different stress states 不同应力状态下高结晶聚乙烯屈服的实验与模拟

INTERNATIONAL JOURNAL OF PLASTICITY

IF12.8

2014-03-01

PREAI

Hachour, K.; Zairi, F.; Nait-Abdelaziz, M.; Gloaguen, J. M.; Aberkane, M.; Lefebvre, J. M.

Molecular dynamics study of the polymer clay nanocomposites (PCNs): Elastic constants and basal spacing predictions

COMPUTATIONAL MATERIALS SCIENCE

IF3.3

2013-09-01

PREAI

Anoukou, K.; Zaoui, A.; Zairi, F.; Nait-Abdelaziz, M.; Gloaguen, J. M.

Fatigue life prediction of rubber-like materials under multiaxial loading using a continuum damage mechanics approach: Effects of two-blocks loading and R ratio 使用连续损伤力学方法预测多轴载荷下橡胶类材料的乏力寿命: 两块载荷和R比的影响

MECHANICS OF MATERIALS

IF4.1

2012-09-01

PREAI

Ayoub, G.; Nait-Abdelaziz, M.; Zairi, F.; Gloaguen, J. M.; Charrier, P.

A continuum damage model for the high-cycle fatigue life prediction of styrene-butadiene rubber under multiaxial loading

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2011-09-01

OAAI

Ayoub, G.; Nait-Abdelaziz, M.; Zairi, F.; Gloaguen, J. M.; Charrier, P.

Study of the effect of size and clay structural parameters on the yield and post-yield response of polymer/clay nanocomposites via a multiscale micromechanical modelling

ACTA MATERIALIA

IF9.3

2011-06-01

PREAI

Zairi, F.; Gloaguen, J. M.; Nait-Abdelaziz, M.; Mesbah, A.; Lefebvre, J. M.

Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: Experiments and constitutive modelling

INTERNATIONAL JOURNAL OF PLASTICITY

IF12.8

2011-04-01

116

PREAI

Ayoub, G.; Zairi, F.; Frederix, C.; Gloaguen, J. M.; Nait-Abdelaziz, M.; Seguela, R.; Lefebvre, J. M.

Modeling the low-cycle fatigue behavior of visco-hyperelastic elastomeric materials using a new network alteration theory: Application to styrene-butadiene rubber

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

IF6

2011-02-01

PREAI

Ayoub, G.; Zairi, F.; Nait-Abdelaziz, M.; Gloaguen, J. M.

A physically-based constitutive model for anisotropic damage in rubber-toughened glassy polymers during finite deformation 基于物理的本构模型，用于在有限变形过程中橡胶增韧的玻璃状聚合物中的各向异性损伤

INTERNATIONAL JOURNAL OF PLASTICITY

IF12.8

2011-01-01

109

PREAI

Zairi, F.; Nait-Abdelaziz, M.; Gloaguen, J. M.; Lefebvre, J. M.

Modelling large deformation behaviour under loading-unloading of semicrystalline polymers: Application to a high density polyethylene 模拟半结晶聚合物在加载-卸载下的大变形行为: 在高密度聚乙烯中的应用

INTERNATIONAL JOURNAL OF PLASTICITY

IF12.8

2010-03-01

211

PREAI

Ayoub, G.; Zairi, F.; Nait-Abdelaziz, M.; Gloaguen, J. M.

Modelling of photodegradation effect on elastic-viscoplastic behaviour of amorphous polylactic acid films 光降解效应对非晶态聚乳酸薄膜弹粘塑性行为的模拟

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS

IF6

2010-02-01

PREAI

Belbachir, S.; Zairi, F.; Ayoub, G.; Maschke, U.; Nait-Abdelaziz, M.; Gloaguen, J. M.; Benguediab, M.; Lefebvre, J. M.

Experimental and numerical study of ECAE deformation of polyolefins

COMPUTATIONAL MATERIALS SCIENCE

IF3.3

2009-05-01

PREAI

Aour, B.; Zairi, F.; Boulahia, R.; Nait-Abdelaziz, M.; Gloaguen, J. M.; Lefebvre, J. M.

Micromechanics-based modelling of stiffness and yield stress for silica/polymer nanocomposites

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2009-04-01

162

PREAI

Boutaleb, S.; Zairi, F.; Mesbah, A.; Nait-Abdelaziz, M.; Gloaguen, J. M.; Boukharouba, T.; Lefebvre, J. M.

Micromechanical modelling and simulation of chopped random fiber reinforced polymer composites with progressive debonding damage

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2008-10-01

OAAI

Zairi, F.; Nait-Abdelaziz, M.; Gloaguen, J. M.; Bouaziz, A.; Lefebvre, J. M.

研究方向