logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
S

Surajit Kumar Paul

indian institute of technology patna

37H指数
161论文数
4.1K被引数
收录论文 81
发表时间
logo
Investigating tensile and fatigue response, failure behavior of incrementally formed AA6061-O components with different wall angles and incremental depths研究不同壁角和增量深度下增量成型AA6061-O组件的拉伸和疲劳响应及失效行为
errMaterialia
IF2.9
err2026-06-03
err0
PREAI
errMohit Sharma; Anirban Bhattacharya; Surajit Kumar Paul
err分享
err收藏
Influence of single point incremental forming induced residual stresses and surface topography on the high-cycle fatigue performance of AA6061-T6单点 incremental forming 引起的残余应力和表面形貌对 AA6061-T6 高周疲劳性能的影响
errCIRP Journal of Manufacturing Science and Technology
IF5.4
err2026-03-17
err0
PREAI
errMohit Sharma; Anirban Bhattacharya; Surajit Kumar Paul
err分享
err收藏
Cyclic Hardening Response of Twinning Induced Plasticity Steel, 316 and 304 Stainless Steels Under Low-Cycle Fatigue Conditions: Experimental Insights, Microstructural Evolution, and Modelling Approaches孪生诱导塑性钢、316和304不锈钢在低周疲劳条件下的循环硬化响应：实验见解、微观结构演变和建模方法
errAdvanced Engineering Materials
IF3.3
err2026-03-01
err0
PREAI
errSurajit Kumar Paul
err分享
err收藏
Failure behavior in single point incremental forming parts of AA6061-T6AA6061-T6单点增量成形零件的失效行为
errENGINEERING FAILURE ANALYSIS
IF5.7
err2025-05-22
err0
PREAI
errSharma, Mohit; Bhattacharya, Anirban; Paul, Surajit Kumar
err分享
err收藏
Effect of number of deposition layers on the microstructure, corrosion and fretting wear of duplex stainless-steel weld cladding
errSURFACE & COATINGS TECHNOLOGY
IF6.1
err2025-04-01
err0
PREAI
errThakur, Ravi Kumar; Kishore, Kaushal; Shajan, Nikhil; Kumar, D. Vijay; Kumar, B. Nirmal; Prabhakaran, Anand; Paul, Surajit Kumar; Tiwari, Mayank; Arora, Kanwer Singh
err分享
err收藏
Effect of Surface Roughness on the Friction Moment in a Lubricated Deep Groove Ball Bearing
errLUBRICANTS
IF2.9
err2024-12-11
err0
errOAAI
errKumar, Harsh; Gupta, Vaibhav; Bharath, Velamala; Tiwari, Mayank; Paul, Surajit Kumar; Agrawal, Lokesh; Singh, Arendra Pal; Jain, Ayush
err分享
err收藏
Molecular dynamics simulation of dry sliding between non-Gaussian copper rough surfaces
errAPPLIED SURFACE SCIENCE
IF6.9
err2024-08-01
err2
PREAI
errKumar, Sudhanshu; Rajput, Ashutosh; Paul, Surajit Kumar; Tiwari, Mayank
err分享
err收藏
An innovative approach to planar mixed-mode fatigue crack growth study
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2024-07-01
err1
PREAI
errMaity, Rathin; Singh, Akhilendra; Paul, Surajit Kumar
err分享
err收藏
Assessing notch fatigue performance of aluminium alloy AA2024-T4 after uni-axial and equi-biaxial tensile pre-straining: Experimental observations and predictive models
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2024-06-01
err1
PREAI
errRex, Amit Vikram; Paul, Surajit Kumar; Singh, Akhilendra
err分享
err收藏
Explicating tensile response of AA6061-T6 sheet post single point incremental forming: Two camera-DIC strain measurement and texture analysis
errMECHANICS OF MATERIALS
IF4.1
err2024-05-01
err2
PREAI
errSharma, Mohit; Bhattacharya, Anirban; Paul, Surajit Kumar
err分享
err收藏
Zone-wise low cycle fatigue behavior of AA6061-T6 similar friction stir welding
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2024-05-01
err0
PREAI
errSuthar, Harish; Sharma, Mohit; Bhattacharya, Anirban; Paul, Surajit Kumar
err分享
err收藏
Superior strength-ductility balance of an extremely low stacking fault energy (SFE) high-entropy alloy (HEA) processed by novel hybrid-rolling
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2024-03-01
err4
PREAI
errPaul, S.; Bhattacharjee, P. P.
err分享
err收藏
The fatigue crack growth behavior of hydrogenated 9Cr-1Mo steel: An experimental and numerical study
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2024-02-21
err0
PREAI
errBharati, Mahesh; Maity, Rathin; Singh, Akhilendra; Paul, Surajit Kumar
err分享
err收藏
Influence of single point incremental forming on the low-cycle fatigue performance of AA6061-T6
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2024-01-01
err3
PREAI
errSharma, Mohit; Bhattacharya, Anirban; Paul, Surajit Kumar
err分享
err收藏
Local strain evolution and microstructural characterisation of hydrogen-induced damage at different strain rates in dual phase (DP 780) steel
errFORCES IN MECHANICS
IF3.5
err2023-12-01
err1
errOAAI
errKumar, Anuranjan; Paul, Surajit Kumar
err分享
err收藏
Influence of uniaxial and equi-biaxial tensile pre-straining on the high cycle and notch fatigue behaviour of AA2024-T4 aluminium alloy
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2023-12-01
err5
PREAI
errRex, Amit Vikram; Paul, Surajit Kumar; Singh, Akhilendra
err分享
err收藏
A physics-based defect tolerant design approach to predict the tensile performance of aluminium alloys with a defect
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2023-10-01
err4
PREAI
errPaul, Surajit Kumar
err分享
err收藏
The influence of equi-biaxial and uniaxial tensile pre-strain on the low cycle fatigue performance of the AA2024-T4 aluminium alloy
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2023-08-01
err12
PREAI
errRex, Amit Vikram; Paul, Surajit Kumar; Singh, Akhilendra
err分享
err收藏
Assessment of surface and subsurface evolution under rolling contact fatigue of a pearlitic steel评估珠光体钢在滚动接触乏力下的表面和次表面演变
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2023-06-01
err2
PREAI
errKumar, Sudhanshu; Paul, Surajit Kumar; Tiwari, Mayank
err分享
err收藏
A cyclic plastic zone size-based defect tolerant design approach to predict the fatigue life of additively manufactured alloys
errFORCES IN MECHANICS
IF3.5
err2023-05-01
err5
errOAAI
errPaul, Surajit Kumar
err分享
err收藏

研究方向

暂无研究方向
合作学者
合作期刊
P
P.P. Bhattacharjee
H 指数: 40 · 论文数: 177
S
Shashwati Sen
H 指数: 35 · 论文数: 181
S
S. Tarafder
H 指数: 35 · 论文数: 187
K
K. Hariharan
H 指数: 34 · 论文数: 227
A
Akhilendra Singh
H 指数: 33 · 论文数: 197
查看更多