logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
J

J.M. Molina-Aldareguía

universidad politecnica de madrid

55H指数
251论文数
9.0K被引数
收录论文 114
发表时间
logo
Superelastic 3D printed nitinol lattices and wovens lead to dramatic variations of mechanical properties by design超弹性3D打印镍钛诺晶格和织物通过设计导致机械性能的巨大变化
errVIRTUAL AND PHYSICAL PROTOTYPING
IF8.8
err2026-01-22
err0
PREAI
errAguilar Vega, Carlos; Contreras-Almengor, Oscar; Zapata Martinez, Rodrigo; Li, Muzi; Martinez, Vanesa; San Roman, Amalia; Molina-Aldareguia, Jon; Diaz Lantada, Andres
err分享
err收藏
In situ multiscale XCT degradation study of PEO-modified WE43 scaffolds: Correlating microstructure with hydrogen evolution原位多尺度XCT降解研究：PEO改性WE43支架的微观结构与氢气析出关联
errAdditive Manufacturing
IF11.1
err2025-12-04
err0
PREAI
errM.D. Martin-Alonso; G. Dominguez; F. Benn; S. Pöstges; A. Kopp; J. Villanova; P. Lhuissier; J. Molina-Aldareguia; F. Sket
err分享
err收藏
Modulating the Electrocatalytic Activity of Intermetallic Compounds for the Hydrogen Evolution Reaction via Elastic Strain Engineering通过弹性应变工程调节金属间化合物的电催化活性用于氢气生成反应
errACS Catalysis
IF13.1
err2025-11-24
err0
PREAI
errJ. Redondo; J. Subbian; M. A. Monclus; V. Vassilev-Galindo; J. M. Molina-Aldareguia; J. LLorca
err分享
err收藏
Micro-fracture toughness and durability of HiPIMS-deposited hard coatings used for micro-milling of Ti6Al4V alloys微裂纹韧性及HiPIMS沉积硬质涂层的耐久性，用于Ti6Al4V合金的微铣削
errSurface and Coatings Technology
IF6.1
err2025-11-05
err0
PREAI
errA. Garcia-Carrero; M.A. Monclús; J.A. Santiago; P. Díaz-Rodríguez; I. Fernández Martínez; Alvaro Guzman-Bautista; Eloho Okotete; Subin Lee; Christoph Kirchlechner; J. Molina Aldareguia
err分享
err收藏
Influence of manufacturing route and surface modification on the corrosion behavior of WE43 Mg and Zn1Mg bioabsorbable metallic alloys制造路线和表面改性对WE43 Mg和Zn1Mg生物可吸收金属合金腐蚀行为的影响
errsurface coatings technology
IF0
err2025-07-05
err0
errOAAI
errGuillermo Domínguez; Muzi Li; Simon Pöstges; Alexander Kopp; Maria Serdechnova; Carsten Blawert; Javier LLorca; Jennifer Patterson; Mónica Echeverry-Rendón; Jon Molina-Aldareguia
err分享
err收藏
Effect of elastic strains on the electrocatalytic activity of Au thin films for the hydrogen evolution reaction弹性应变对Au薄膜电催化活性在氢气进化反应中的影响
errJOURNAL OF CATALYSIS
IF6.5
err2025-07-01
err0
errOAAI
errRedondo, J.; Subbian, J.; Monclus, M. A.; Pendashteh, A.; Perez, D.; Mehdi, M.; Ruiz-Hervias, J.; Aldareguia, J. M. Molina; Llorca, J.
err分享
err收藏
Effect of surface modification methods on 3D-printed NiTi alloys for cardiovascular applications表面改性方法对用于心血管应用的3D打印NiTi合金的影响
errBIOMATERIALS ADVANCES
IF6
err2025-04-19
err0
PREAI
errContreras-Almengor, O.; Ordono, J.; Li, M.; Matykina, E.; Avella, M.; Echeverry-Rendon, M.; Diaz-Lantada, A.; Molina-Aldareguia, J. M.
err分享
err收藏
The microstructure and mechanical properties of nitinol manufactured by LPBF: differences between Ni-rich and Ti-rich compositions激光粉末床熔融（LPBF）制造的镍钛诺（Nitinol）的微观结构与力学性能：富镍与富钛成分的差异
errVIRTUAL AND PHYSICAL PROTOTYPING
IF8.8
err2025-03-13
err1
errOAAI
errMuzi Li; Oscar Contreras-Almengor; Jesús Ordoño; Carlos Aguilar Vega; Rodrigo Zapata Martínez; M. Echeverry-Rendón; Andrés Díaz-Lantada; Jon Molina-Aldareguia
err分享
err收藏
Comparative analysis of machining and electropolishing for surface quality improvement of shape memory nitinol samples additively manufactured by laser powder bed fusion通过激光粉末床融合增材制造的形状记忆镍钛诺样品的表面质量改善的加工和电抛光的比较分析
errADDITIVE MANUFACTURING LETTERS
IF4.7
err2025-02-01
err1
errOAAI
errMartinez, Rodrigo Zapata; Bose-Bandyopadhyay, Shohom; Burl, Alan; Contreras-Almengor, Oscar; Vega, Carlos Aguilar; Saleeby, Kyle; Kurfess, Thomas; Lantada, Andres Diaz; Molina-Aldareguia, Jon
err分享
err收藏
Short fatigue crack growth and retained austenite in steels processed via quenching and partitioning
errMATERIALS & DESIGN
IF7.9
err2024-09-01
err1
errOAAI
errGarcia-Chao, Pablo; Molina-Aldareguia, Jon M.; Linke, Bernd M.; Thiessen, Richard G.; Sabirov, Ilchat
err分享
err收藏
Topology optimisation and lithography-based ceramic manufacturing of short-stem hip prostheses with enhanced biomechanical and mechanobiological performance具有增强的生物力学和机械生物学性能的短柄髋关节假体的拓扑优化和基于光刻的陶瓷制造
errVIRTUAL AND PHYSICAL PROTOTYPING
IF8.8
err2024-08-11
err0
errOAAI
errSolorzano-Requejo, William; Martinez Cendrero, Adrian; Altun, Altan Alpay; Nohut, Serkan; Ojeda, Carlos; Garcia Molleja, Javier; Molina-Aldareguia, Jon; Schwentenwein, Martin; Diaz Lantada, Andres
err分享
err收藏
The effect of κ-carbides on high cycle fatigue behavior of a Fe-Mn-Al-C lightweight steel
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2024-07-01
err1
errOAAI
errGomez, A.; Banis, A.; Avella, M.; Molina-Aldareguia, J. M.; Petrov, R. H.; Dutta, A.; Sabirov, I.
err分享
err收藏
Microarchitected Compliant Scaffolds of Pyrolytic Carbon for 3D Muscle Cell Growth用于3D肌肉细胞生长的热解碳的微架构顺应性支架
errADVANCED HEALTHCARE MATERIALS
IF9.6
err2024-01-02
err2
errOAAI
errTaale, Mohammadreza; Schamberger, Barbara; Monclus, Miguel A.; Dolle, Christian; Taheri, Fereydoon; Mager, Dario; Eggeler, Yolita M.; Korvink, Jan G.; Molina-Aldareguia, Jon M.; Selhuber-Unkel, Christine; Lantada, Andres Diaz; Islam, Monsur
err分享
err收藏
Microstructural and mechanical properties at the submicrometric length scale under service-like working conditions on ground WC-Co grades
errINTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
IF4.6
err2023-11-01
err5
PREAI
errRiu, G.; Monclus, M. A.; Slawik, S.; Cinca, N.; Tarres, E.; Muecklich, F.; Llanes, L.; Molina-Aldareguia, J. M.; Guitar, M. A.; Roa, J. J.
err分享
err收藏
Does flash sintering alter the deformation mechanisms of tungsten carbide?闪光烧结是否改变了碳化钨的变形机制？
errACTA MATERIALIA
IF9.3
err2023-10-01
err2
errOAAI
errMazo, Isacco; Monclus, Miguel A.; Molina-Aldareguia, Jon M.; Sglavo, Vincenzo M.
err分享
err收藏
Exploring the effect of complex hierarchic microstructure of quenched and partitioned martensitic stainless steels on their high cycle fatigue behaviour探索淬火和分配马氏体不锈钢的复杂层次微观结构对其高周乏力行为的影响
errMATERIALS & DESIGN
IF7.9
err2023-09-01
err5
errOAAI
errSierra-Soraluce, A.; Li, G.; Santofimia, M. J.; Molina-Aldareguia, J. M.; Smith, A.; Muratori, M.; Sabirov, I.
err分享
err收藏
Study of the effect of strain rate on the in-plane shear and transverse compression response of a composite ply using computational micromechanics
errCOMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
IF8.9
err2023-05-01
err17
errOAAI
errRueda-Ruiz, Mario; Herraez, Miguel; Sket, Federico; Galvez, Francisco; Gonzalez, Carlos; Molina-Aldareguia, Jon M.
err分享
err收藏
Role of surface carbon nanolayer on the activation of flash sintering in tungsten carbide
errINTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
IF4.6
err2023-02-01
err11
PREAI
errMazo, Isacco; Vanzetti, Lia E.; Molina-Aldareguia, Jon M.; Molinari, Alberto; Sglavo, Vincenzo M.
err分享
err收藏
Effect of microstructure on tensile properties of quenched and partitioned martensitic stainless steels显微组织对淬火配分马氏体不锈钢拉伸性能的影响
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-02-01
err18
errOAAI
errSierra-Soraluce, A.; Li, G.; Santofimia, M. J.; Molina-Aldareguia, J. M.; Smith, A.; Muratori, M.; Sabirov, I.
err分享
err收藏
Room temperature stability, structure and mechanical properties of cubic tungsten carbide in flash sintered products
errJOURNAL OF MATERIALS SCIENCE
IF3.9
err2023-01-04
err2
PREAI
errMazo, Isacco; Molina-Aldareguia, Jon M.; Molinari, Alberto; Sglavo, Vincenzo M.
err分享
err收藏

研究方向

暂无研究方向
合作学者
合作期刊
D
Dierk Raabe
H 指数: 178 · 论文数: 2.3K
T
Terence G. Langdon
H 指数: 138 · 论文数: 1.5K
Р
Р. З. Валиев
H 指数: 118 · 论文数: 1.1K
L
Lars Hultman
H 指数: 116 · 论文数: 999
I
Irene J. Beyerlein
H 指数: 88 · 论文数: 540
查看更多