logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
P

P. Baláž

agh university of krakow

21H指数
164论文数
1.9K被引数
收录论文 66
发表时间
logo
Optimizing Image Segmentation for Microstructure Analysis of High-Strength Steel: Histogram-Based Recognition of Martensite and Bainite
errMaterials
IF3.2
err2026-01-25
err0
errOAAI
errFilip Hallo; Tomasz Jażdżewski; Piotr Bała; Grzegorz Korpała; Krzysztof Regulski
err分享
err收藏
Deformation-induced martensitic transformation in fused filament fabrication austenitic stainless steels during tension at wide range of temperatures (77 K, RT)在宽温度范围（77 K，RT）拉伸过程中，熔融沉积成型奥氏体不锈钢中的变形诱发马氏体转变
errMaterials Science and Engineering: A
IF0
err2025-12-01
err0
PREAI
errJ. Tabin; J. Kawałko; D. Schob; R. Roszak; A. Brodecki; P. Bała; Ph Maasch; Z. Kowalewski; M. Ziegenhorn
err分享
err收藏
Angle- and energy-dispersive diffraction used to determine stress evolution in 17-4 PH stainless steel produced by ADAM and subjected to SMAT processing角散和能散衍射用于确定由ADAM制备并经过SMAT处理的17-4 PH不锈钢中的应力演化
errJOURNAL OF APPLIED CRYSTALLOGRAPHY
IF2.8
err2025-12-01
err0
PREAI
errMarciszko-Wiackowska, M.; Baczmanski, A.; Apel, D.; Klaus, M.; Genzel, Ch.; Chemkhi, M.; Saferna, M.; Wierzbanowski, K.; Kawalko, J.; Le Joncour, L.; Francois, M.; Bala, P.
err分享
err收藏
Annealing-induced precipitation strengthening and thermal stability of an ultrafine-grained bioresorbable Zn–Li–Mn–Mg alloy processed by rapid solidification退火诱导析出强化及快速凝固处理的超细晶生物可降解Zn–Li–Mn–Mg合金的热稳定性
errJournal of Materials Research and Technology
IF6.6
err2025-09-13
err0
errOAAI
errWiktor Bednarczyk; Witold Chromiński; Grzegorz Cios; Maria Wątroba; Monika Wieczorek-Czarnocka; Grzegorz Cieślak; Marianna Marciszko-Wiąckowska; Johann Michler; Piotr Bała; Małgorzata Lewandowska
err分享
err收藏
Pattern matching workflows for EBSD data analysis: Quartz chirality mappingEBSD数据分析的模式匹配工作流程：石英手性映射
errMATERIALS CHARACTERIZATION
IF5.5
err2025-06-01
err0
PREAI
errCios, Grzegorz; Winkelmann, Aimo; Tokarski, Tomasz; Bala, Piotr
err分享
err收藏
Plastic flow instability in austenitic stainless steels at room temperature: Macroscopic tests and microstructural analysis室温下奥氏体不锈钢的塑性流动不稳定性: 宏观测试和微观结构分析
errINTERNATIONAL JOURNAL OF PLASTICITY
IF12.8
err2024-12-01
err0
errOAAI
errNalepka, K.; Tabin, J.; Kawalko, J.; Brodecki, A.; Bala, P.; Kowalewski, Z.
err分享
err收藏
Melt Pool Changes Characterization in Laser-Processed H11 Hot Work Tool Steel Using Point-by-Point Scanning Mode towards LPBF Process Optimization
errMATERIALS
IF3.2
err2024-09-21
err0
errOAAI
errFryzowicz, Krzysztof; Bardo, Radoslaw; Dziurka, Rafal; Kawalko, Jakub; Cios, Grzegorz; Stwora, Andrzej; Bala, Piotr
err分享
err收藏
Kinetics and mechanisms of high-temperature oxidation in BCC and FCC high-alloy Fe-based alloys with high volume fraction of carbides具有高体积分数碳化物的BCC和FCC高合金铁基合金的高温氧化动力学和机理
errMATERIALS & DESIGN
IF7.9
err2024-08-01
err0
errOAAI
errWieczerzak, Krzysztof; Stygar, Miroslaw; Brylewski, Tomasz; Chulist, Robert; Bala, Piotr; Michler, Johann
err分享
err收藏
The influence of Mo addition on static recrystallization and grain growth behaviour in CoNiFeMn system subjected to prior deformation
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2024-03-15
err4
PREAI
errCichocki, K.; Bala, P.; Kwiecien, M.; Szymula, M.; Chrzan, K.; Hamilton, C.; Muszka, K.
err分享
err收藏
Influence of process parameters on the quality of powder bed fusion-fabricated Ni-Co-Fe-Mn-Ti high entropy alloy prints using elemental powders
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2024-01-01
err4
PREAI
errBardo, R.; Dziurka, R.; Fryzowicz, K.; Cios, G.; Marciszko-Wiackowska, M.; Gajewska, M.; Hain, C.; Bala, P.
err分享
err收藏
Effect of creep deformation on the microstructure evolution of Inconel 625 nickel-based superalloy additively manufactured by laser powder bed fusion蠕变变形对激光粉末床熔融增材制造Inconel 625镍基高温合金组织演变的影响
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-11-01
err6
PREAI
errPasiowiec, Hubert; Dubiel, Beata; Dziurka, Rafal; Bala, Piotr; Ledwig, Piotr; Wrobel, Miroslaw; Gajewska, Marta; Ziaja, Waldemar; Poreba, Marek
err分享
err收藏
Investigation of the structural, magnetic and dielectric properties of NiFe2O4/nanoclay composites synthesized via sol-gel autocombustion
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-11-01
err6
errOAAI
errBaul, S.; Paul, T. C.; Hoque, K.; Khan, M. N. I.; Islam, S.; Sen, S. K.; Kamal, M. M.; Bala, P.
err分享
err收藏
Effect of cooling rate during solidification on structure and mechanical properties of Cu45Zr48Al7 glass-forming alloy
errJOURNAL OF MATERIALS SCIENCE
IF3.9
err2023-10-29
err0
errOAAI
errKoziel, Tomasz; Cios, Grzegorz; Rutkowski, Bogdan; Wierzbicka-Miernik, Anna; Pajor, Krzysztof; Bala, Piotr
err分享
err收藏
Investigation of slip systems activity and grain boundary sliding in fine-grained superplastic zinc alloy
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2023-10-23
err4
errOAAI
errBednarczyk, Wiktor; Kawalko, Jakub; Watroba, Maria; Szuwarzynski, Michal; Bala, Piotr
err分享
err收藏
The Effect of Al and Ti Additions on Solid Solution Strengthening and Precipitation Hardening in CoNiFe Medium-Entropy Alloys
errMATERIALS
IF3.2
err2023-09-20
err5
errOAAI
errBala, Piotr; Gorecki, Kamil; Dziurka, Rafal; Koziel, Tomasz
err分享
err收藏
Point-by-point laser exposure for crack susceptibility reduction in Powder Bed Fusion processing of H11 tool steel
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2023-07-01
err3
errOAAI
errFryzowicz, K.; Dziurka, R.; Bardo, R.; Marciszko-Wiackowska, M.; Bala, P.
err分享
err收藏
Crystallization Kinetics Analysis of the Binary Amorphous Mg72Zn28 Alloy二元非晶Mg72Zn28合金的晶化动力学分析
errMATERIALS
IF3.2
err2023-03-29
err4
errOAAI
errOpitek, Bartosz; Gracz, Beata; Lelito, Janusz; Krajewski, Witold K.; Lucarz, Mariusz; Bala, Piotr; Koziel, Tomasz; Gondek, Lukasz; Szucki, Michal
err分享
err收藏
Assignment of chiral elemental crystal structures using Kikuchi diffraction
errMATERIALS CHARACTERIZATION
IF5.5
err2023-02-01
err3
PREAI
errWinkelmann, Aimo; Cios, Grzegorz; Tokarski, Tomasz; Bala, Piotr; Grin, Yuri; Burkhardt, Ulrich
err分享
err收藏
In vitro cytocompatibility and antibacterial studies on biodegradable Zn alloys supplemented by a critical assessment of direct contact cytotoxicity assay
errJOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
IF3.4
err2022-08-26
err33
errOAAI
errWatroba, Maria; Bednarczyk, Wiktor; Szewczyk, Piotr K.; Kawalko, Jakub; Mech, Krzysztof; Gruenewald, Alina; Unalan, Irem; Taccardi, Nicola; Boelter, Gabriela; Banzhaf, Manuel; Hain, Caroline; Bala, Piotr; Boccaccini, Aldo R.
err分享
err收藏
Fabrication of stainless-steel microfibers with amorphous-nanosized microstructure with enhanced mechanical properties
errSCIENTIFIC REPORTS
IF3.9
err2022-06-24
err8
errOAAI
errSharifikolouei, Elham; Sarac, Baran; Zheng, Yonghui; Bala, Piotr; Eckert, Jurgen
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
T
Terence G. Langdon
H 指数: 138 · 论文数: 1.5K
A
Aldo R. Boccaccini
H 指数: 133 · 论文数: 1.8K
J
J. Eckert
H 指数: 114 · 论文数: 1.8K
I
Irene J. Beyerlein
H 指数: 88 · 论文数: 542
B
Boris B. Straumal
H 指数: 78 · 论文数: 496
查看更多