Meysam Haghshenas - Publications, H-index & Citations

Meysam Haghshenas

University System of Ohio

26H指数

117论文数

2.5K被引数

收录论文 56

发表时间

Mechanical and fatigue failure of wire arc additive manufactured 17-4 PH stainless steel 丝材电弧增材制造17-4 PH不锈钢的力学与疲劳失效

Engineering Failure Analysis

IF5.7

2026-07-01

PREAI

Antu, Md Naimur Rahman; Shakil, Shawkat Imam; Ribble, Riyanka; Krishnamurthy, Ajay; Bednarczyk, Wiktor; Cios, Grzegorz; Lawrence, Joseph; Haghshenas, Meysam

Cryogenic ultrasonic fatigue: mechanisms, advancements, and insights 低温超声疲劳：机制、进展与见解

CRYOGENICS

IF2.1

2025-12-01

PREAI

Mahtabi, MohammadBagher; Roshan, Mojtaba; Muhit, Md Muhiul Islam; Behvar, Alireza; Haghshenas, Meysam

Ambient and high-temperature rotating bending fatigue of as-built and hot isostatic pressed additively manufactured 316L stainless steel 环境及高温下，采用增材制造的316L不锈钢（按原样建造和经过热等静压处理）的旋转弯曲疲劳性能

International Journal of Fatigue

IF6.8

2025-11-05

OAAI

Yahya Aghayar; Alireza Behvar; Md Naimur Rahman Antu; Maryam Avateffazeli; Meysam Haghshenas; Mohsen Mohammadi

Effect of pre-corrosion on the fatigue performance of direct energy deposited nickel–aluminum bronze (NAB)预腐蚀对直接能量沉积镍铝青铜（NAB）疲劳性能的影响

Materials Chemistry and Physics

IF4.7

2025-11-01

OAAI

Mojtaba Roshan; MohammadBagher Mahtabi; Wiktor Bednarczyk; Grzegorz Cios; Meysam Haghshenas

Microstructure, mechanical properties, and fatigue performance of a PBF-LB Al2139ZrTi alloy PBF-LB Al2139ZrTi合金的微观结构、力学性能和疲劳性能

International Journal of Fatigue

IF6.8

2025-08-20

OAAI

Shawkat I. Shakil; Wiktor Bednarczyk; Marta Gajewska; Zaynab Mahbooba; Ankit Saharan; Andrea Tridello; Alessandro Benelli; Meysam Haghshenas

Ultrasonic fatigue of wire arc additive manufactured (WAAM) nickel-Aluminum bronze (NAB): ex-situ corrosion 丝材电弧增材制造 (WAAM) 镍铝青铜 (NAB) 的超声波疲劳：原位腐蚀

Engineering Failure Analysis

IF5.7

2025-06-24

OAAI

MohammadBagher Mahtabi; Mojtaba Roshan; Wiktor Bednarczyk; Meysam Haghshenas

Rotating Bending Fatigue of Laser Powder Bed Fused 316L Stainless Steel at Various Stress Levels: Microstructural Evaluation and Predictive Modeling

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2024-11-17

OAAI

Aghayar, Yahya; Behvar, Alireza; Haghshenas, Meysam; Mohammadi, Mohsen

A Review on Fatigue Characteristics of Nickel-Aluminum Bronze (NAB): Conventionally Fabricated and Additively Manufactured

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2024-11-11

OAAI

Roshan, Mojtaba; Mahtabi, Mohammadbagher; Eslamloo, Sara Ranjbar; Behvar, Alireza; Haghshenas, Meysam

Synergistic impact of corrosion pitting on the rotating bending fatigue of additively manufactured 316L stainless steel: Integrated experimental and modeling analyses 腐蚀点蚀对增材制造316L不锈钢旋转弯曲乏力的协同影响: 综合实验和建模分析

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2024-11-01

OAAI

Behvar, Alireza; Aghayar, Yahya; Avateffazeli, Maryam; Tridello, Andrea; Benelli, Alessandro; Paolino, Davide S.; Mohammadi, Mohsen; Haghshenas, Meysam

Additively manufactured Ti-5Al-5V-5Mo-3Cr: Understanding defect-fatigue relationships

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2024-10-01

PREAI

Yasin, Mohammad Salman; Jam, Alireza; Habibnejad-Korayem, Mahdi; Haghshenas, Meysam; Shao, Shuai; Shamsaei, Nima

Fatigue response of wire-arc additive manufactured nickel-aluminum bronze (NAB) in the post-annealed condition 退火后电弧增材制造的镍铝青铜 (NAB) 的乏力响应

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2024-10-01

OAAI

Shakil, Shawkat I.; Shakerin, Sajad; Rahmdel, Keivan; Mohammadi, Mohsen; Tridello, Andrea; Paolino, Davide S.; Shao, Shuai; Shamsaei, Nima; Haghshenas, Meysam

Very high cycle fatigue of fiber-reinforced polymer composites: Uniaxial ultrasonic fatigue 纤维增强聚合物复合材料的极高循环乏力: 单轴超声乏力

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2024-06-22

PREAI

Behvar, Alireza; Sojoodi, Mahyar; Elahinia, Mohammad; Niutta, Carlo B.; Tridello, Andrea; Paolino, Davide S.; Haghshenas, Meysam

Very high cycle fatigue of laser powder bed fused Al-Cu-Mg-Ag-TiB2 (A20X) Alloy: Stress relief and aging treatments 激光粉末床熔融Al-Cu-Mg-Ag-TiB2 (A20X) 合金的极高循环乏力: 应力消除和时效处理

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2024-06-01

PREAI

Avateffazeli, Maryam; Shakil, Shawkat I.; Behvar, Alireza; Attallah, Moataz M.; Simsiriwong, Jutima; Tridello, Andrea; Paolino, Davide S.; Haghshenas, Meysam

Hydrogen embrittlement and hydrogen-induced crack initiation in additively manufactured metals: A critical review on mechanical and cyclic loading

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

IF8.3

2024-03-01

PREAI

Behvar, Alireza; Haghshenas, Meysam; Djukic, Milos B.

Life prediction and failure analysis in laser powder bed fused TiC/Ti6Al4V titanium matrix composite under high cycle and very high cycle fatigue conditions

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2024-03-01

PREAI

Li, C.; Li, W.; Lashari, M. I.; Sun, C. W.; Wang, S. W.; Haghshenas, M.

Integration of additive manufacturing and thermomechanical processing toward a hybrid production route for PH13-8Mo stainless steel 将增材制造和热机械加工集成到PH13-8Mo不锈钢的混合生产路线中

MATERIALS TODAY COMMUNICATIONS

IF4.5

2024-03-01

PREAI

Benoit, Michael J.; Ganton, Trevor; Kaushik, Harish Chandra; Shakil, Shawkat Imam; Zaker, Nafiseh; Amirkhiz, Babak Shalchi; Nasiri, Ali; Haghshenas, Meysam; Hadadzadeh, Amir

Investigation of frequency-dependent fatigue crack growth behavior in perfluorosulfonic-acid membrane: In-situ experiment, constitutive modeling and crack growth prediction

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2024-02-01

PREAI

Cai, Liang; Mo, Zhenglin; Haghshenas, Meysam; Li, Wei

Interior cracking behavior of laser powder bed fused TiC/Ti6Al4V composites under vacuum environment

VACUUM

IF3.9

2024-01-01

PREAI

Li, C.; Lashari, M. I.; Haghshenas, M.; Sun, C. W.; Wang, S. W.; Li, W.