logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
R

Rintaro Ueji

Kagawa University

39H指数
196论文数
6.2K被引数
收录论文 67
发表时间
logo
Heterostructure induced superior strength-ductility balance in sigma phase containing low SFE Co30Cr20Fe20Mn20Ni10 FCC high entropy alloy含σ相的低SFE Co30Cr20Fe20Mn20Ni10 FCC高熵合金中异质结构诱导的优异强度-延性平衡
errIntermetallics
IF4.8
err2026-06-10
err0
PREAI
errBikash Tripathy; Florian Tropper; Takahito Ohmura; Ueji Rintaro; Koichi Tsuchiya
err分享
err收藏
Enhancing hydrogen embrittlement resistance in high-strength martensitic steels via tailoring variant selection at prior austenite grain boundaries通过调控先析奥氏体晶界处的变体选择来提高高强度马氏体钢的氢致脆性抗力
errScripta Materialia
IF5.6
err2025-12-30
err0
errOAAI
errXiaodong Lan; Kazuho Okada; Rintaro Ueji; Akinobu Shibata
err分享
err收藏
Three-dimensional morphologies, substructures, and crystallography of pearlite in carbon steel珠光体在碳钢中的三维形貌、亚结构和晶体学
errScience and Technology of Advanced Materials
IF6.9
err2025-08-11
err0
errOAAI
errAkinobu Shibata; Akiko Nakamura; Taku Moronaga; Kazuho Okada; Toru Hara; Rintaro Ueji
err分享
err收藏
Mechanical response in tension of twin-induced Mg alloys in wide strain rate regimes
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-04-01
err2
PREAI
errSomekawa, Hidetoshi; Ueji, Rintaro; Singh, Alok
err分享
err收藏
Plastic anisotropy in yield stress of drawn pearlitic steels
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-04-01
err1
PREAI
errAkada, Takumi; Ueji, Rintaro; Mitsuhara, Masatoshi; Yamasaki, Shigeto; Tanaka, Masaki
err分享
err收藏
Role of deformation on the hydrogen trapping in the pearlitic steel
errSCRIPTA MATERIALIA
IF5.6
err2024-03-01
err11
PREAI
errLi, Z. H.; Sasaki, T. T.; Ueji, R.; Kimura, Y.; Shibata, A.; Ohkubo, T.; Hono, K.
err分享
err收藏
Activation of non type dislocation in near <0001>-oriented Mg by Sc addition
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-01-01
err2
PREAI
errChandiran, Elango; Ogawa, Yukiko; Ueji, Rintaro; Singh, Alok; Somekawa, Hidetoshi; Ohmura, Takahito
err分享
err收藏
Enhancement of damping capacity by deformation-induced martensitic transformation in Mg-Sc alloy
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-07-01
err4
PREAI
errChandiran, Elango; Ogawa, Yukiko; Ueji, Rintaro; Singh, Alok; Somekawa, Hidetoshi
err分享
err收藏
Formation condition and effect on the early stages of plastic deformation of chemical short-range order in Cr-Co-Ni medium-entropy alloy
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2023-04-01
err13
PREAI
errTeramoto, Takeshi; Kitasumi, Kentaro; Shimohara, Ryota; Ito, Yusuke; Shimizu, Ryouga; Tanaka, Katsushi; Ueji, Rintaro
err分享
err收藏
Application of a sparse mixed regression method to design the optimal composition and heat treatment conditions for transformation-induced plasticity steel with high strength and large elongation
errSCRIPTA MATERIALIA
IF5.6
err2023-01-01
err1
PREAI
errUeji, Rintaro; Nagata, Kenji; Somekawa, Hidetoshi; Demura, Masahiko
err分享
err收藏
Stress partitioning between bcc and cementite phases discussed from phase stress and dislocation density in martensite steels
errSCRIPTA MATERIALIA
IF5.6
err2023-01-01
err9
errOAAI
errTsuchida, N.; Ueji, R.; Gong, W.; Kawasaki, T.; Harjo, S.
err分享
err收藏
An inverse Hall-Petch relationship during room-temperature compression of commercially pure magnesium
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2023-01-01
err22
PREAI
errChandiran, Elango; Ogawa, Yukiko; Ueji, Rintaro; Somekawa, Hidetoshi
err分享
err收藏
Yield-Point Phenomenon and Plastic Bands in Ferrite-Pearlite Steels
errMATERIALS
IF3.2
err2022-12-26
err6
errOAAI
errQiu, Hai; Ueji, Rintaro; Inoue, Tadanobu
err分享
err收藏
Compression temperature to activate kinking in pearlitic steel
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2022-11-01
err5
PREAI
errUeji, Rintaro; Somekawa, Hidetoshi; Inoue, Tadanobu; Hara, Toru
err分享
err收藏
Deformation behaviour of novel medium carbon bainitic steels with different retained austenite characteristics designed by the sparse mixed regression model稀疏混合回归模型设计的具有不同残余奥氏体特征的新型中碳贝氏体钢的变形行为
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2022-07-01
err3
errOAAI
errChandiran, Elango; Ueji, Rintaro; Ogawa, Yukiko; Nagata, Kenta; Somekawa, Hidetoshi; Demura, Masahiko
err分享
err收藏
Plastic Instability in Medium-Carbon Tempered Martensite Steel
errMATERIALS
IF3.2
err2021-08-17
err1
errOAAI
errQiu, Hai; Ueji, Rintaro; Inoue, Tadanobu; Kimura, Yuuji
err分享
err收藏
Grain-to-Grain Interaction Effect in Polycrystalline Plain Low-Carbon Steel within Elastic Deformation Region
errMATERIALS
IF3.2
err2021-04-09
err2
errOAAI
errQiu, Hai; Ueji, Rintaro; Kimura, Yuuji; Inoue, Tadanobu
err分享
err收藏
Ductile-to-Brittle Transition and Brittle Fracture Stress of Ultrafine-Grained Low-Carbon Steel
errMATERIALS
IF3.2
err2021-03-26
err26
errOAAI
errInoue, Tadanobu; Qiu, Hai; Ueji, Rintaro; Kimura, Yuuji
err分享
err收藏
Crystallographic orientation dependence of deformation-induced martensitic transformation of 1.3 GPa-class 0.6 %C bainitic steel with retained austenite
errSCRIPTA MATERIALIA
IF5.6
err2021-03-01
err9
PREAI
errUeji, Rintaro; Shibata, Akinobu; Ushioda, Kohsaku; Kimura, Yuuji; Ohmura, Takahito; Inoue, Tadanobu
err分享
err收藏
Effect of strain and deformation mode on cube texture formation in warm bi-axial rolled low-carbon steel
errFINITE ELEMENTS IN ANALYSIS AND DESIGN
IF3.5
err2021-01-01
err7
errOAAI
errInoue, Tadanobu; Ueji, Rintaro
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
K
K. Hono
H 指数: 120 · 论文数: 1.2K
N
Nobuhiro Tsuji
H 指数: 88 · 论文数: 670
H
Hidetoshi Fujii
H 指数: 67 · 论文数: 834
X
Xiaoxu Huang
H 指数: 67 · 论文数: 561
Y
Yoshinobu Baba
H 指数: 62 · 论文数: 823
查看更多