Jonghun Yoon - Publications, H-index & Citations

Jonghun Yoon

hanyang university

25H指数

124论文数

2.0K被引数

收录论文 84

发表时间

Effect of Gravitational Orientation on Bead Geometry and Position-Dependent Parameter Compensation in Multi-Pass Orbital Gas Tungsten Arc Welding 重力方向对多道摆动钨极氩弧焊中焊珠几何形状和位置依赖参数补偿的影响

Materials

IF3.2

2026-09-23

OAAI

Yuhyeong Jeong; Van Doi Truong; Jaehak Lee; Jonghun Yoon

Deep learning prediction of weld bead geometry during multi-pass multi-layer welding process 多道次多层焊接过程中焊缝熔敷几何形状的深度学习预测

Engineering Applications of Artificial Intelligence

IF8

2026-04-19

PREAI

Van Doi Truong; Jonghun Yoon

Phenomenological modeling of galvannealed coating flaking under various deformation modes 热镀锌涂层在不同变形模式下的现象学建模

Thin-Walled Structures

IF6.6

2026-04-13

PREAI

Kyucheol Jeong; Taeyoung Kim; Jaewook Lee; Jonghun Yoon

Optimization of heating sequences for joint installation of district heating pipeline with heat-shrinkable PEX casing 联合安装区域供热管道与热缩PEX套管时加热序列的优化

International Journal of Pressure Vessels and Piping

IF3.5

2026-03-04

PREAI

Youngjin Jeon; Hyungsu Ju; Seungbeom Jang; Yu-Hyeong Jeong; Jooyong Kim; Yeonsoo Kim; Junghae Hwang; Dongil Choi; Jonghun Yoon

Integrated Ultra-Wideband Microwave System to Measure Composition Ratio Between Fat and Muscle in Multi-Species Tissue Types 集成超宽带微波系统，用于测量多物种组织类型中脂肪和肌肉之间的成分比

Sensors

IF3.5

2026-03-03

OAAI

Lixiao Zhou; Van Doi Truong; Jonghun Yoon

Automated Installation System for Joint Casing with Circumferential Temperature Control in District Heating Pipelines Using a Heat-Shrinkable PEX Tube 利用热缩PEX管进行环形温度控制的区域供热管道接头套管自动化安装系统

Polymers

IF4.9

2026-03-01

OAAI

Jang, Seungbeom; Jeong, Yuhyeong; Jeon, Youngjin; Ju, Hyungsu; Kim, Jooyong; Kim, Yeonsoo; Hwang, Junghae; Choi, Dongil; Yoon, Jonghun

Real-Time Quality Classification in Free-form Bending of AHSS Panels With Principal Component Analysis and Support Vector Machine Method 基于主成分分析和支持向量机方法的自由弯曲高强钢板的实时质量分类

International Journal of Precision Engineering and Manufacturing

IF3.6

2025-11-10

PREAI

HyunKyo Lim; ChanWoo Park; GyuRae Kim; GeunHo Kim; Jonghun Yoon

Deep learning-based machine vision system for real-time edge fracture detection in the hole expansion test 基于深度学习的机器视觉系统，用于孔扩张试验中的实时边缘裂纹检测

Engineering Applications of Artificial Intelligence

IF8

2025-11-07

PREAI

Van Doi Truong; Jonghun Yoon

AI-Assisted Fusion Technique for Orthodontic Diagnosis Between Cone-Beam Computed Tomography and Face Scan Data 基于锥形束计算机断层扫描与面部扫描数据的人工智能辅助正畸诊断融合技术

Bioengineering 2025, Vol. 12, Page 975

IF3.7

2025-09-27

OAAI

Than Trong Khanh Dat; Jang-Hoon Ahn; Hyunkyo Lim; Jonghun Yoon

Monolithic LIG-VIA Embedded in Colorless Polyimide for Durable Interlayer Channels 单块LIG-VIA嵌入无色聚酰亚胺中以实现耐用的层间通道

sensors and actuators a physical

IF0

2025-09-04

PREAI

Jungmin Hong; Eunseung Hwang; Yoon-Wha Song; Hyunkoo Lee; Youngchan Kim; Kee-Ryung Park; Junyeob Yeo; Jonghun Yoon; Junho Oh; Jun-Geol Ahn; Jinhyeong Kwon; Sukjoon Hong

Ensemble machine learning model for prediction of inner welding defects in orbital GTAW (Gas Tungsten Arc Welding) process with monitored by multi-sensor system 基于多传感器监测系统的轨道GTAW（气体保护钨极氩弧焊）过程中内部焊接缺陷预测的集成机器学习模型

International Journal of Pressure Vessels and Piping

IF3.5

2025-08-27

PREAI

YuHyeong Jeong; Yunfeng Wang; Van Doi Truong; Seungbeom Jang; Jangwook Lee; Jonghun Yoon

A Deep Learning-Based Machine Vision System for Online Monitoring and Quality Evaluation During Multi-Layer Multi-Pass Welding 基于深度学习的机器视觉系统，用于多道多层焊接过程中的在线监控和质量评估

sensors

IF0

2025-08-14

OAAI

Van Doi Truong; Yunfeng Wang; Chanhee Won; Jonghun Yoon

A Systematic Review of Machine Vision Applications in Factory and Manufacturing Processes: From Quality Control to Predictive Diagnostics 工厂和制造流程中机器视觉应用的系统综述：从质量控制到预测性诊断

International Journal of Precision Engineering and Manufacturing-Green Technology

IF5.6

2025-08-05

PREAI

Seongje Kim; Thong Phi Nguyen; Jonghun Yoon

Experimental Investigation of Delayed Fracture Initiation in Advanced High-Strength Steel Under Accelerated Bending 先进高强度钢在加速弯曲下的延迟断裂起始实验研究

materials

IF0

2025-07-21

OAAI

Kyucheol Jeong; Jaewook Lee; Jonghun Yoon

Predictive capabilities of micromechanical and phenomenological damage models in tension, shear and bending failure for advanced high-strength steels 先进高强钢在拉伸、剪切和弯曲失效情况下的微观力学和唯象损伤模型的预测能力

International Journal of Solids and Structures

IF3.8

2025-06-26

PREAI

Kyucheol Jeong; Jaewook Lee; Jonghun Yoon

Numerical analysis of residual stress in the bending process using kinematic isotropic hardening models for a helical tube in SMR and a U-bent tube in PWR 采用运动各向同性硬化模型对SMR中的螺旋管和PWR中的U形弯管弯曲过程中的残余应力进行数值分析

Nuclear Engineering and Technology

IF2.6

2025-06-03

OAAI

Kyucheol Jeong; Jae-Yoon Jeong; Hyun-Suk Nam; Hyung-Doh Roh; Kwanghyun Ahn; Jonghun Yoon

Room and high-temperature tensile properties of austenitic stainless steel 321 fabricated by wire arc additive manufacturing 由丝材电弧增材制造制备的奥氏体不锈钢321的室温及高温拉伸性能

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2025-05-01

OAAI

Kannan, A. Rajesh; Shanmugam, N. Siva; Sanjeeviprakash, K.; Palguna, Yasam; Korla, Rajesh; Lee, Wonjoo; Jeong, Yuhyeong; Yoon, Jonghun

1.5 GPa Grade High-Strength Steel Sheet Flattening by Roll Gap Adjustment Considering Pattern Roll Effects 1.5 GPa等级高强度钢板通过考虑花纹辊效应的辊缝调整进行展平

MATERIALS

IF3.2

2025-04-09

OAAI

Jeon, Youngjin; Jeong, Kyucheol; Kim, Geun-ho; Yoon, Jonghun

U-Net-Based Deep Learning Hybrid Model: Research and Evaluation for Precise Prediction of Spinal Bone Density on Abdominal Radiographs 基于U-Net的深度学习混合模型：腹部X光片脊柱骨密度精确预测的研究与评估

BIOENGINEERING-BASEL

IF3.7

2025-04-03

OAAI

Zhou, Lixiao; Nguyen, Thongphi; Choi, Sunghoon; Yoon, Jonghun

Automated Measurements of Tooth Size and Arch Widths on Cone-Beam Computerized Tomography and Scan Images of Plaster Dental Models

BIOENGINEERING-BASEL

IF3.7

2024-12-29

OAAI

Nguyen, Thong Phi; Ahn, Jang-Hoon; Lim, Hyun-Kyo; Kim, Ami; Yoon, Jonghun

研究方向