logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
Z

Zongqing Ma

Jining Medical University

37H指数
233论文数
4.9K被引数
收录论文 139
发表时间
logo
Rapid solidification and microstructural evolution of spherical Al2O3/3YSZ eutectic feedstocks for additive manufacturing快速凝固及球形Al2O3/3YSZ共晶增材制造喂料的微观结构演化
errCeramics International
IF5.6
err2026-09-18
err0
PREAI
errNan Lu; Fuduo Yan; Kai Zhao; Jinzhao Sun; Honghua Li; Jiangtao Li; Fengshi Yin; Zongqing Ma
err分享
err收藏
High-cycle fatigue behavior of different regions in a 12%Cr/30Cr2Ni4MoV welded joint at 330°C在330°C下12%Cr/30Cr2Ni4MoV焊接接头不同区域的高周疲劳行为
errInternational Journal of Pressure Vessels and Piping
IF3.5
err2026-08-01
err0
PREAI
errWang, Wenke; Guo, Wenhui; Guo, Yang; Ai, Zheyue; Zhao, Zhifei; Chen, Yu; Ma, Zongqing
err分享
err收藏
Robust and Generalizable Detection of Scleral Spots and Dots in Complex Ocular Surfaces With Attention and Mamba-Enhanced YOLOv5
errJOURNAL OF BIOPHOTONICS
IF2.3
err2025-10-01
err0
PREAI
errBai, Hantao; Ma, Zongqing; Gao, Chuxiang; Fan, Fan; Meng, Xiaochen; Zhang, Xiaoqing; Zhu, Jiang
err分享
err收藏
The Optimization of Microstructure and Superconducting Properties of Sn Doped Nb3Al Bulks Prepared by Low-Temperature Sintering低温度烧结制备的Sn掺杂Nb₃Al块材微观结构与超导性能的优化
errPHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
IF1.9
err2025-09-01
err0
PREAI
errHe, Yaqi; Li, Xinhua; Zhang, Lihua; Xu, Jiawei; Chen, Songhua; Ma, Zongqing
err分享
err收藏
Aging kinetic and precipitation evolution of Al3BC/2024 Al composites during aging heat treatment时效热处理过程中Al3BC/2024 Al复合材料的时效动力学及析出演化
errJournal of Alloys and Compounds
IF6.3
err2025-08-07
err0
PREAI
errGuoteng Li; Zihan Luo; Baoqi Cheng; Haoyi Gong; Xia Ma; Xiangfa Liu; Chongchong Wu; Guiliang Liu; Zongqing Ma; Kai Zhao; Fengshi Yin; Yongfeng Zhao
err分享
err收藏
Improvement of critical current density in Nb3Al superconductors co-doped by Sn-B
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2025-04-05
err0
PREAI
errHe, Yaqi; Li, Xinhua; Qian, Zhu; Yan, Zupeng; Shi, Guizhen; Sun, Xia; Ma, Zongqing
err分享
err收藏
Effects of pre-heating induced interfacial diffusion on microstructure and related mechanical properties of direct laser metal deposited Inconel 625 superalloy on a Cu-Cr-Zr substrate
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2025-01-01
err1
PREAI
errZhao, Ruohan; Li, Lulu; Nie, Zhenhua; Ma, Zongqing; Guo, Qianying
err分享
err收藏
Effects of residual Laves phase on microstructural evolution and mechanical properties of wire arc additive manufactured GH4169 Ni-based superalloy残余Laves相对电弧增材制造GH4169镍基高温合金组织演变和力学性能的影响
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-11-01
err2
PREAI
errHao, Zhenghua; He, Zhi; Nie, Zhenhua; Li, Jianwei; Ma, Zongqing; Guo, Qianying
err分享
err收藏
Kinetics of voids evolution during diffusion bonding of dissimilar metals on consideration of the realistic surface morphology: Modeling and experiments
errACTA MATERIALIA
IF9.3
err2024-09-01
err6
PREAI
errChang, Ruijiang; Guo, Qianying; Ma, Zongqing; Ding, Ran; Liu, Chenxi; Liu, Yongchang
err分享
err收藏
Improving creep strength of the fine-grained heat-affected zone of novel 9Cr martensitic heat-resistant steel via modified thermo-mechanical treatment
errINTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS
IF7.2
err2024-06-04
err1
PREAI
errZhang, Jingwen; Yu, Liming; Liu, Yongchang; Ding, Ran; Liu, Chenxi; Ma, Zongqing; Li, Huijun; Gao, Qiuzhi; Wang, Hui
err分享
err收藏
Temperature dependence tensile behaviors of additively manufactured GH4099 Ni-based superalloy增材制造GH4099镍基高温合金的温度依赖性拉伸行为
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-05-01
err7
PREAI
errNie, Zhenhua; Guo, Qianying; Zhao, Yanan; Ma, Zongqing; Liu, Yongchang
err分享
err收藏
A new design strategy for purifying and strengthening W alloy by self-decomposing in-situ nanoparticles
errMATERIALS CHARACTERIZATION
IF5.5
err2024-02-01
err2
PREAI
errHu, Weiqiang; Wei, Lianfeng; He, Jun; Chen, Songhua; Liu, Shaocun; Ma, Zongqing; Liu, Yongchang
err分享
err收藏
Phase interface engineering: A new route towards ultrastrong yet ductile Mo alloy
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-01-01
err9
PREAI
errHu, Weiqiang; Wei, Lianfeng; Li, Yanchao; Zhang, Wen; Ma, Zongqing; Liu, Chenxi; Liu, Yongchang
err分享
err收藏
The role of the post-heat treatment on the Cr-based precipitates and related room temperature mechanical properties of the sintered Nb-lean Cu-Cr-Nb alloy
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-01-01
err5
errOAAI
errPan, Yukun; Guo, Qianying; Hu, Zhangping; Wei, Chen; Ding, Ran; Liu, Chenxi; Ma, Zongqing; Liu, Yongchang
err分享
err收藏
The role of ceramic particles on the crack inhibition and mechanical properties improvement of Haynes 230 alloy fabricated by laser powder bed fusion陶瓷颗粒对激光粉末床熔融制备的Haynes 230合金的裂纹抑制和力学性能改善的作用
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2023-11-01
err5
PREAI
errZhao, Yanan; He, Jun; Li, Bo; Gao, Zhengjiang; Guo, Qianying; Ma, Zongqing; Liu, Yongchang
err分享
err收藏
Deformation behavior, microstructure evolution, and rupture mechanism of the novel G115 steel welded joint during creep
errMATERIALS CHARACTERIZATION
IF5.5
err2023-11-01
err6
PREAI
errZhang, Jingwen; Yu, Liming; Ding, Ran; Liu, Chenxi; Ma, Zongqing; Li, Huijun; Liu, Yongchang; Gao, Qiuzhi; Wang, Hui
err分享
err收藏
Significant reduction of grain size and texture intensity in laser powder bed fusion fabricated nickel-based superalloy by increasing constitutional supercooling通过增加结构过冷度显着降低激光粉末床熔融制造的镍基高温合金中的晶粒尺寸和织构强度
errCOMPOSITES PART B-ENGINEERING
IF14.2
err2023-11-01
err21
PREAI
errZhao, Yanan; Ma, Teng; Gao, Zhengjiang; Feng, Yiyu; Li, Chong; Guo, Qianying; Ma, Zongqing; Liu, Yongchang
err分享
err收藏
Multi-task generative adversarial network for retinal optical coherence tomography image denoising
errPHYSICS IN MEDICINE AND BIOLOGY
IF3.4
err2023-02-03
err9
PREAI
errXie, Qiaoxue; Ma, Zongqing; Zhu, Lianqing; Fan, Fan; Meng, Xiaochen; Gao, Xinxiao; Zhu, Jiang
err分享
err收藏
Development of weld filler material to match the advanced martensitic heat resistance steel G115 and tailoring the performance by tempering temperature
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2022-11-01
err8
errOAAI
errZhang, Jingwen; Yu, Liming; Gao, Qiuzhi; Liu, Chenxi; Ma, Zongqing; Li, Huijun; Liu, Yongchang; Wang, Hui
err分享
err收藏
A new strategy to improve the creep strength of a novel G115 steel by accelerating the precipitation of nano-sized MX and Cu-rich particles
errSCRIPTA MATERIALIA
IF5.6
err2022-11-01
err17
PREAI
errZhang, Jingwen; Yu, Liming; Gao, Qiuzhi; Liu, Chenxi; Ma, Zongqing; Li, Huijun; Liu, Yongchang; Wang, Hui
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
窦世学 封面图
窦世学 (Shi Xue Dou)
H 指数: 187 · 论文数: 2.6K
Y
YamauchiYusuke (Yusuke Yamauchi)
H 指数: 169 · 论文数: 1.6K
Y
Yoshio Bando
H 指数: 169 · 论文数: 1.8K
胡文平 封面图
胡文平 (Wenping Hu)
H 指数: 133 · 论文数: 1.4K
张钒 封面图
张钒 (Fan Zhang)
H 指数: 125 · 论文数: 1.1K
查看更多