logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
R

Rahul Swarup Sharma

Dayalbagh Educational Institute

20H指数
106论文数
1.0K被引数
收录论文 23
发表时间
logo
Experimental and machine-learning analysis of the compressive strength of fused filament fabricated MWCNTs reinforced PLA using SHAP, Taguchi, and response surface methodology采用SHAP、田口方法和响应面法对熔融丝材制备的MWCNTs增强PLA压缩强度的实验和机器学习分析
errJournal of Thermoplastic Composite Materials
IF3.4
err2026-06-23
err0
PREAI
errBobby Tyagi; Deepansh Dhall; Srashti Dixit; Anjnay Mahajan; Nishtha Goyal; Gagandeep; Abhishek Raj; Akshay Pathania; Ankit Sahai; Rahul Swarup Sharma
err分享
err收藏
Integrating experimental characterization and machine learning for predicting the tensile behaviour of PLA–MWCNTs FFF composites结合实验表征和机器学习预测PLA–MWCNTs FFF复合材料的拉伸行为
errProgress in Additive Manufacturing
IF5.4
err2026-06-19
err0
PREAI
errTapish Raj; Akash Jain; Ankit Sahai; Rahul Swarup Sharma
err分享
err收藏
Electrochemical energy storage device through fused filament fabrication: mechanical, electrical, and thermal characterisation通过熔融挤压成型制造的电化学储能装置：机械、电气和热特性表征
errJournal of Materials Science: Materials in Electronics
IF0
err2026-03-23
err0
PREAI
errAkash Jain; Tapish Raj; Ankit Sahai; Rahul Swarup Sharma
err分享
err收藏
Nickel material extrusion additive manufacturing with spiky carbonyl powder: Feedstock development, debinding, and sintering镍材料挤压增材制造与刺状羰基粉末：喂料开发、脱脂和烧结
errJournal of Materials Research
IF2.9
err2026-03-06
err0
PREAI
errNaeim Karimi; Hatem Zurob; Ramona Haniyeh Fayazfar; Ankit Sahai; Rahul Swarup Sharma
err分享
err收藏
Geographical trends of drug-resistant strains of Mycobacterium leprae in TLM hospitals: insights from a four-year study across eleven hospitals in eight Indian States麻风分枝杆菌药物耐药菌株的地理趋势：来自印度八个邦11家TLM医院四年研究的研究发现
errEuropean Journal of Clinical Microbiology & Infectious Diseases
IF3
err2025-12-23
err0
PREAI
errRahul Sharma; Itu Singh; Saurabh Gupta
err分享
err收藏
An investigation into topology optimization for weight saving and mechanical property enhancement of FDM 3D printed objects关于拓扑优化以减轻FDM 3D打印物体重量并增强其机械性能的研究
errThe International Journal of Advanced Manufacturing Technology
IF0
err2025-12-10
err0
PREAI
errKaelin Azariah d King; Ramona H. Fayazfar; Saumang Swarup Sharma; Ankit Sahai; Rahul Swarup Sharma
err分享
err收藏
Machine Learning Insights Into the Mechanical Behavior of Fused Filament Fabricated Polylactic Acid Composites Reinforced With Carbon Fiber, Graphene, and Multi-Walled Carbon Nano Tubes机器学习对碳纤维、石墨烯和多壁碳纳米管增强的熔融丝材成型聚乳酸复合材料力学行为的见解
errJournal of Applied Polymer Science
IF2.8
err2025-10-14
err0
PREAI
errBobby Tyagi; Tapish Raj; Abhishek Raj; Saumang Swarup Sharma; Kanishka Pathik; Saloni Upadhyay; Achint Kumar; Sajal Bhaskar; Bhor Varshney; Akash Jain; Haniyeh Fayazfar; Ankit Sahai; Rahul Swarup Sharma
err分享
err收藏
Experimentation and predictive modelling of Fused filament fabrication parts by finite element analysis and fuzzy Inference system通过有限元分析和模糊推理系统对熔融 filament 制造零件进行实验与预测建模
errINTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION
IF1.6
err2025-09-01
err0
PREAI
errKumar, Bhupesh; Singh, Vishal; Pathak, Harsh; Shukla, Ayush; Kavde, Sanjay; Verma, Nigam; Raj, Tapish; Jain, Akash; Yadav, Pushpendra; Sahai, Ankit; Sharma, Rahul Swarup
err分享
err收藏
Advancements in additive manufacturing for electrochemical energy storage devices电化学储能设备增材制造技术的进展
errProceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems
IF0
err2025-08-20
err0
PREAI
errAkash Jain; Tapish Raj; Ankit Sahai; Rahul Swarup Sharma
err分享
err收藏
Machine learning approach in fused filament fabrication for flexural characteristics of polylactic acid reinforced with carbon fibres
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2025-04-01
err0
PREAI
errJain, Akash; Pathik, Kanishka; Upadhyay, Saloni; Raj, Tapish; Sahai, Ankit; Sharma, Rahul Swarup
err分享
err收藏
Structural integrity of fused filament fabricated polymer composites using Taguchi method and XGB regression
errPROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART N-JOURNAL OF NANOMATERIALS NANOENGINEERING AND NANOSYSTEMS
IF5
err2025-02-19
err0
PREAI
errJain, Akash; Raj, Tapish; Upadhyay, Saloni; Pathik, Kanishka; Sahai, Ankit; Sharma, Rahul Swarup
err分享
err收藏
Predictive modelling of flexural behaviour of polymer composites: a machine learning approach through material extrusion
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2024-12-05
err2
PREAI
errJain, Akash; Upadhyay, Saloni; Pathik, Kanishka; Raj, Tapish; Sahai, Ankit; Sharma, Rahul Swarup
err分享
err收藏
A bibliometric study of additively manufactured batteries
errINTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM
IF2.5
err2024-09-09
err0
PREAI
errJain, Akash; Goyal, Ashish; Raj, Abhishek; Rajora, Arsh; Bhardwaj, Lakshya; Chandrakar, Anand Swarup; Gupta, Hritav; Layal, Pohap Kumar; Raj, Tapish; Sharma, Gaurang Swarup; Sahai, Ankit; Sharma, Rahul Swarup
err分享
err收藏
Machine learning-assisted prediction modeling for anisotropic flexural strength variations in fused filament fabrication of graphene reinforced poly-lactic acid composites
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2024-08-26
err6
PREAI
errRaj, Tapish; Tiwary, Amrit; Jain, Akash; Sharma, Gaurang Swarup; Vuppuluri, Prem Prakash; Sahai, Ankit; Sharma, Rahul Swarup
err分享
err收藏
Optimizing the process parameters with statistical and soft computing techniques for enhanced mechanical properties of acrylonitrile butadiene styrene material samples fabricated via fused filament fabrication technique用统计和软计算技术优化工艺参数，以增强通过熔丝制造技术制造的丙烯腈丁二烯苯乙烯材料样品的机械性能
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2024-08-25
err2
PREAI
errRaj, Abhishek; Tyagi, Bobby; Sharma, Gaurang Swarup; Sahai, Ankit; Sharma, Rahul Swarup
err分享
err收藏
Investigating the influence of annealing and nozzle diameter on tensile strength of polyethylene terephthalate glycol composites
errJOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
IF3.4
err2024-03-08
err11
PREAI
errRaj, Tapish; Tyagi, Bobby; Jain, Akash; Sahai, Ankit; Sharma, Rahul Swarup
err分享
err收藏
Fracture morphology and strength characteristics of poly-lactic acid and poly-ethylene terephthalate glycol composites combined with taguchi method and response surface methodology
errJOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
IF3.4
err2023-12-15
err11
PREAI
errJain, Akash; Sahai, Ankit; Sharma, Rahul Swarup
err分享
err收藏
Comparing the flexural and morphological properties of dissimilar FFF-fabricated polymer composites
errJOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
IF3.4
err2023-04-15
err13
PREAI
errJain, Akash; Upadhyay, Saloni; Sahai, Ankit; Sharma, Rahul Swarup
err分享
err收藏
Process parameter tailored evaluation of FFF-fabricated carbon fibre based poly-lactic-acid composites
errJOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
IF3.4
err2023-02-03
err16
PREAI
errJain, Akash; Kant, Krishna; Singh, Sudhir Kumar; Sahai, Ankit; Sharma, Rahul Swarup
err分享
err收藏
Augmenting mechanical design engineering with additive manufacturing
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2022-11-10
err14
PREAI
errSinghal, Ishant; Tyagi, Bobby; Chowdhary, Riya; Saggar, Anami; Raj, Abhishek; Sahai, Ankit; Fayazfar, Haniyeh; Sharma, Rahul Swarup
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
J
Jinhee Kim
H 指数: 43 · 论文数: 349
K
Kyoung Jin Choi
H 指数: 41 · 论文数: 141
H
Hatem S. Zurob
H 指数: 38 · 论文数: 204
L
Lakshya Bhardwaj
H 指数: 27 · 论文数: 111
M
Myung‐Ho Bae
H 指数: 27 · 论文数: 148
查看更多