logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
N

Nectarios Vidakis

Department of Mechanical Engineering

49H指数
233论文数
7.2K被引数
收录论文 108
发表时间
logo
Optimization of the control process parameters for PETG reinforced with short milled glass fiber in MEX additive manufacturing: impact on tensile and bending metrics在MEX增材制造中优化PETG短切玻璃纤维增强复合材料的控制过程参数：对拉伸和弯曲性能的影响
errInternational Journal of Advanced Manufacturing Technology
IF3.1
err2026-09-09
err0
errOAAI
errMarkos Petousis; Emmanuel Stratakis; Nektarios K. Nasikas; Anastasios Zavos; Maria Spyridaki; Aikaterini Gkagkanatsiou; Konstantinos Zafeiris; Nectarios Vidakis
err分享
err收藏
Optimization of key quality metrics of high-performance polyvinylidene fluoride (PVDF) in MEX additive manufacturing: correlation with mechanical scores高性能聚偏氟乙烯（PVDF）在MEX增材制造中的关键质量指标优化：与力学评分的相关性
errThe International Journal of Advanced Manufacturing Technology
IF0
err2026-07-08
err0
errOAAI
errMarkos Petousis; Constantine David; Dimitris Sagris; Emmanuel Stratakis; Maria Spyridaki; Aikaterini Gkagkanatsiou; Ioannis Valsamos; Nectarios Vidakis
err分享
err收藏
Multi-featured acrylonitrile styrene acrylate doped with biocidal nanoblend for material extrusion 3D printing: antibacterial and thermomechanical metrics多特征丙烯腈苯乙烯丙烯酸酯掺杂生物杀灭纳米混合物用于材料挤出3D打印：抗菌和热机械指标
errResults in Engineering
IF7.9
err2026-05-28
err0
errOAAI
errEmmanuel Stratakis; Markos Petousis; Nikolaos Michailidis; Vassilis M. Papadakis; Maria Spyridaki; Nikolaos Mountakis; Apostolos Argyros; Aikaterini Gkagkanatsiou; Nektarios K. Nasikas; Nectarios Vidakis
err分享
err收藏
Mechanical response optimization of polyvinylidene fluoride (PVDF) in material extrusion (MEX) 3D printing聚偏氟乙烯（PVDF）在材料挤出（MEX）3D打印中的力学响应优化
errJournal of Materials Research and Technology
IF6.6
err2026-04-03
err0
errOAAI
errEmmanuel Stratakis; Markos Petousis; Maria Spyridaki; Ioannis Valsamos; Nikolaos Mountakis; Nektarios K. Nasikas; Aikaterini Gkagkanatsiou; Nectarios Vidakis
err分享
err收藏
Multi-parameter optimization of 3D-printed polyphenylene sulfide (PPS) for enhanced mechanical performance3D打印聚苯硫醚（PPS）的多参数优化以增强机械性能
errResults in Engineering
IF7.9
err2026-03-20
err0
errOAAI
errEmmanuel Stratakis; Markos Petousis; Nektarios K. Nasikas; Nikolaos Mountakis; Ioannis Valsamos; Maria Spyridaki; Aikaterini Gkagkanatsiou; Nectarios Vidakis
err分享
err收藏
Interpreting the effect of critical control settings on the quality metrics of thermoplastic polyimide in extrusion based additive manufacturing
errThe International Journal of Advanced Manufacturing Technology
IF0
err2026-01-27
err0
errOAAI
errMarkos Petousis; Constantine David; Dimitris Sagris; Maria Spyridaki; Nikolaos Mountakis; Emmanuel Stratakis; Nectarios Vidakis
err分享
err收藏
Scrap PMMA valorization with optimized content of Silicon Carbide nanofiller in additive manufacturing废聚甲基丙烯酸甲酯（PMMA）通过优化碳化硅纳米填料含量的增值在增材制造中的应用
errDefence Technology
IF5.9
err2025-12-16
err0
errOAAI
errNectarios Vidakis; Nikolaos Michailidis; Nektarios K. Nasikas; Vassilis Papadakis; Maria Spyridaki; Apostolos Argyros; Markos Petousis
err分享
err收藏
Printability Metrics and Strain Rate Sensitivity of Multirole PVDF in Extrusion-Based Additive ManufacturingVidakis, N.; Nasikas, N.K.; Michailidis, N.; Spyridaki, M.; Mountakis, N.; Argyros, A.; Papadakis, V.M.; Moutsopoulou, A.; Petousis, M. 印刷性能指标和多角色PVDF在基于挤压的增材制造中的应变率敏感性. Polymers 2025, 17, 3085. [Google Scholar] [CrossRef]
errPolymers
IF4.9
err2025-11-20
err0
errOAAI
errNectarios Vidakis; Nektarios K. Nasikas; Nikolaos Michailidis; Maria Spyridaki; Nikolaos Mountakis; Apostolos Argyros; Vassilis M. Papadakis; Amalia Moutsopoulou; Markos Petousis
err分享
err收藏
Optimization of the Mechanical Response in MEX Additive Manufacturing of Thermoplastic Polyimide (PI): The Impact of Key Process Control Settings热塑性聚酰亚胺（PI）MEX增材制造中机械响应的优化：关键工艺控制参数的影响
errACS Omega
IF4.3
err2025-11-05
err0
errOAAI
errMarkos Petousis; Nikolaos Mountakis; Anastasios Zavos; Ioannis Ntintakis; Amalia Moutsopoulou; Maria Spyridaki; Nektarios K. Nasikas; Emmanuel Maravelakis; Nectarios Vidakis
err分享
err收藏
Optimization of Roughness, Dimensional Conformity, and Porosity of 3D-Printed ASA with MEX: Impact of Critical Process Control ParametersSagris, D.; David, C.; Petousis, M.; Nasikas, N.K.; Mountakis, N.; Spyridaki, M.; Vidakis, N. 优化3D打印ASA的粗糙度、尺寸一致性和孔隙率（MEX）：关键工艺控制参数的影响。ACS Omega 2025, 10, 57286–57305. [Google Scholar] [CrossRef]
errACS OMEGA
IF4.3
err2025-11-01
err0
PREAI
errSagris, Dimitrios; David, Constantine; Petousis, Markos; Nasikas, Nektarios K.; Mountakis, Nikolaos; Spyridaki, Maria; Vidakis, Nectarios
err分享
err收藏
Biocidal and reinforced PETG/antibacterial blend nanocomposite for extrusion-based additive manufacturing: Optimization course and printability scores
errInternational Journal of Lightweight Materials and Manufacture
IF0
err2025-11-01
err1
errOAAI
errVidakis, Nectarios; Michailidis, Nikolaos; Nasikas, Nektarios K.; David, Constantine; Sagris, Dimitrios; Argyros, Apostolos; Valsamos, Ioannis; Gkagkanatsiou, Katerina; Papadakis, Vassilis; Petousis, Markos
err分享
err收藏
Extrudability; printability; and strain rate sensitivity metrics of lightweight thermoplastic polyimide (PI) in material extrusion (MEX) additive manufacturing轻质热塑性聚酰亚胺（PI）在材料挤出（MEX）增材制造中的可挤出性、可打印性和应变率敏感性的指标
errRSC Adv.
IF4.6
err2025-10-31
err0
errOAAI
errNectarios Vidakis; Nikolaos Michailidis; Nikolaos Mountakis; Maria Spyridaki; Apostolos Argyros; Vasileios Stratiotou Efstratiadis; Emmanuel Stratakis; Markos Petousis
err分享
err收藏
Two-step optimization of hybrid friction stir welding parameters for MEX 3D printed ABS-ASA joints混合摩擦搅拌焊接参数的两步优化，用于MEX 3D打印的ABS-ASA接头
errResults in Engineering
IF7.9
err2025-09-21
err0
errOAAI
errNikolaos Mountakis; Nektarios K. Nasikas; Amalia Moutsopoulou; Maria Spyridaki; Dimitris Sagris; Constantine David; Nikolaos Michailidis; Markos Petousis; Emmanuel Stratakis; Nectarios Vidakis
err分享
err收藏
Critical quality indicators assessment in MEX additive manufacturing with bacteria-derived PHA: the effect of process control parameters基于细菌来源PHA的MEX增材制造中关键质量指标评估：工艺控制参数的影响
errThe International Journal of Advanced Manufacturing Technology
IF0
err2025-09-20
err0
PREAI
errNectarios Vidakis; Constantine David; Dimitrios Sagris; Katerina Gkagkanatsiou; Ioannis Valsamos; Amalia Moutsopoulou; Nektarios K. Nasikas; Markos Petousis
err分享
err收藏
Sustainability-driven additive manufacturing: Implementation and content optimization of fine powder recycled glass in polylactic acid for material extrusion 3D printing可持续性驱动的增材制造: 用于材料挤出3D打印的聚乳酸中细粉再生玻璃的实施和含量优化
errINTERNATIONAL JOURNAL OF LIGHTWEIGHT MATERIALS AND MANUFACTURE
IF0
err2025-09-01
err6
errOAAI
errPetousis, Markos; Michailidis, Nikolaos; Kulas, Vaclav; Papadakis, Vassilis; Spiridaki, Mariza; Mountakis, Nikolaos; Argyros, Apostolos; Valsamos, John; Nasikas, Nektarios K.; Vidakis, Nectarios
err分享
err收藏
Ultra- and high-performance polymers for material extrusion additive manufacturing: Recent advancements, challenges, and optimization perspectives用于材料挤出增材制造的超级和高性能聚合物：近期进展、挑战和优化展望
errmaterials science engineering r reports
IF0
err2025-08-21
err0
errOAAI
errNectarios Vidakis; Markos Petousis; Maria Spyridaki; Nikolaos Mountakis; Evgenia Dimitriou; Nikolaos Michailidis
err分享
err收藏
Biodegradable polyhydroxyalkanoate (PHA) composites with biochar ratios optimized for the additive manufacturing method of material extrusion: engineering; rheological; and morphological insights生物可降解聚羟基烷酸酯（PHA）复合材料，其生物炭比例针对材料挤出增材制造方法进行了优化：工程学、流变学和形态学见解
errMater. Adv.
IF4.7
err2025-08-13
err0
errOAAI
errNectarios Vidakis; Nikolaos Michailidis; Dimitrios Kalderis; Apostolos Argyros; Katerina Gkagkanatsiou; Maria Spyridaki; Ioannis Valsamos; Vassilis Papadakis; Markos Petousis
err分享
err收藏
Sustainability driven additive manufacturing: repetitive mechanical recycling response evaluation to valorize polycarbonate scrap可持续驱动增材制造：重复机械回收响应评价以提升聚碳酸酯废料价值
errEnviron. Sci.: Adv.
IF0
err2025-07-29
err0
errOAAI
errMarkos Petousis; Nikolaos Michailidis; Vassilis Papadakis; Katerina Gkagkanatsiou; Apostolos Argyros; Nikolaos Mountakis; Vasileios Stratiotou Efstratiadis; Constantine David; Dimitrios Sagris; Nectarios Vidakis
err分享
err收藏
Process optimization of material extrusion additive manufacturing with ASA: robust design and predictive models for engineering response metricsASA材料挤出增材制造的工艺优化：稳健设计与工程响应指标的预测模型
errINTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
IF3.1
err2025-05-28
err0
errOAAI
errPetousis, Markos; Mountakis, Nikolaos; Spyridaki, Maria; Gkagkanatsiou, Katerina; Valsamos, Ioannis; Moutsopoulou, Amalia; Stratakis, Emmanuel; Vidakis, Nectarios
err分享
err收藏
Valorization of Polymethylmethacrylate Scrap Reinforced with Nano Carbon Black with Optimized Ratio in Extrusion-Based Additive Manufacturing以优化比例添加纳米碳黑的聚甲基丙烯酸甲酯废料在基于挤压的增材制造中的增值利用
errPOLYMERS
IF4.9
err2025-05-17
err0
errOAAI
errMichailidis, Nikolaos; Vidakis, Nectarios; David, Constantine; Sagris, Dimitrios; Papadakis, Vassilis M.; Argyros, Apostolos; Mountakis, Nikolaos; Spyridaki, Maria; Petousis, Markos
err分享
err收藏

研究方向

暂无研究方向
合作学者
合作期刊
V
Viktor Mechtcherine
H 指数: 85 · 论文数: 588
W
Wenya Li
H 指数: 76 · 论文数: 821
E
Emmanuel Stratakis
H 指数: 65 · 论文数: 484
E
Emmanuel Kymakis
H 指数: 59 · 论文数: 233
K
Konstantinos Salonitis
H 指数: 52 · 论文数: 404
查看更多