Minghao Huang

Hangzhou City University

H指数:15

被引数:911

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

End-to-end prediction of internal defects from surface morphology in PBF-LB/M Ni-based superalloys via a multi-modal VAE model

通过多模态VAE模型从PBF-LB/M镍基高温合金表面形貌端到端预测内部缺陷

Progress in Additive Manufacturing

IF5.4

2026-10-140

PRE

Shot peening-induced strengthening mechanism regulation and strength-ductility synergy in powder metallurgy Ti-15Zr alloy

喷丸诱导强化机制调控及粉末冶金Ti-15Zr合金的强度-塑性协同效应

Journal of Materials Research and Technology-JMR&T

IF6.6

2026-09-220

OAAI

Well-Defined RhO4 Species Confined in Self-Pillared Pentasil Zeolite as Efficient Nano Reactors for Hydroformylation of Higher Olefins

在自支撑五硅沸石中限域的规整RhO4物种作为高效纳米反应器用于高级烯烃的氢甲酰化反应

Angewandte Chemie-International Edition

IF16.9

2026-07-270

PRE

Triggering unexpected intra-layer delamination toughening in strong-interface multilayered steel at both room and low temperature

在强界面多层钢中同时引发室温及低温下的意外层内分层增韧

Scripta Materialia

IF5.6

2026-07-010

PRE

Achieving optimal mechanical properties and enhanced formability in the Zr-3 alloy through the application of rolling mode combined with annealing treatment

通过轧制模式与退火处理相结合，实现Zr-3合金的最佳力学性能和增强成形性

Journal of Nuclear Materials

IF3.2

2026-07-010

PRE

Effect of Ethylene Sulfate Additive on the Stability and High-Temperature Performance of Sodium-Ion Batteries

乙烯硫酸添加剂对钠离子电池稳定性和高温性能的影响

ChemElectroChem

IF3.5

2026-05-210

OAAI

Research Progress on Additively Manufactured Porous Structures of Nickel-Based Superalloys

镍基高温合金增材制造多孔结构的研究进展

Materials

IF3.2

2026-05-210

Size-Dependent Mechanical Properties of Additively Manufactured Ti-6Al-4V Thin Walls

增材制造Ti-6Al-4V薄壁的尺寸依赖性力学性能

Materials

IF3.2

2026-05-100

Catalytic Staudinger–Aza-Wittig Reactions through Cycling between a Stibinidene and Isolable Iminostibanes: Chemoselectivity Achieved by Suppressing the Staudinger Reduction

通过在锑烯和可分离的亚胺锑烷之间循环实现催化Staudinger–Aza-Wittig反应：通过抑制Staudinger还原实现化学选择性

Journal of the American Chemical Society

IF15.6

2026-02-200

PRE

First-principles study on the interfacial stability and electronic structure of MgAl2O4/α-Fe heterogeneous nucleation interface in Mg-treated steels

第一性原理研究Mg处理钢中MgAl2O4/α-Fe异质形核界面的界面稳定性和电子结构

Materials Today Communications

IF4.5

2026-02-110

OAAI

Deformation Behavior and Tensile Properties of Layered Bis Austenitic Steel

黄, M.; 贾C.; 沈C.; 许S. 层状双奥氏体钢的变形行为和拉伸性能. JOM 2026, 已录用. [Google Scholar] [CrossRef]

JOM

IF2.3

2026-01-014

PRE

Design and energy absorption analysis of an improved honeycomb-filled origami anti-climber

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES

IF2.9

2025-12-010

PRE

Investigation on High-Temperature Tensile and Wear Properties in an L-PBF-Fabricated TiB2-Reinforced Austenitic Steel

高温拉伸与磨损性能研究：L-PBF制备的TiB2增强奥氏体钢

Metals 2025, Vol. 15, Page 1233

IF2.5

2025-11-090

OAAI

Extraordinary yield strength-ductility synergy by designing layered austenitic stainless and medium Mn steel sheets

通过设计层状奥氏体不锈钢和中锰钢板材实现超常的屈服强度-延性协同效应

Materials Today Communications

IF4.5

2025-07-250

PRE

Deep learning accelerated micrograph-based porosity defect quantification in additively manufactured steels for uncovering a generic process-defect-properties relation

基于深度学习的增材制造钢微观图孔隙缺陷量化加速，以揭示通用的工艺-缺陷-性能关系

MATERIALS CHARACTERIZATION

IF5.5

2025-07-010

PRE

Experimental and first-principles study on the heterogeneous nucleation mechanism of acicular ferrite induced by MgTi2O4 oxides

MATERIALS TODAY COMMUNICATIONS

IF4.5

2025-06-010

PRE

Damage modes and mechanical properties of Ti6Al4V lattice structures under transverse impact loading

Ti6Al4V点阵结构在横向冲击载荷下的损伤模式和力学性能

Additive Manufacturing Letters

IF4.7

2025-05-300

OAAI

Multifunctional strut-plate composite lattice metamaterial for integrated acoustic, energy, and vibration management

多功能支柱-板复合点阵超材料，用于集成声学、能源和振动管理

VIRTUAL AND PHYSICAL PROTOTYPING

IF8.8

2025-05-110

Enhancing the mechanical behaviors of 18Ni300 steel through microstructural evolution in Electron Beam Powder Bed Fusion

通过电子束粉末床熔融过程中的微观结构演变增强18Ni300钢的力学行为

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2025-05-010

OAAI

Microstructure evolution and mechanical properties of Ti-O alloy fabricated via laser powder bed fusion (L-PBF)

激光粉末床熔融 (l-pbf) 制备ti-o合金的组织演变和力学性能

MATERIALS TODAY COMMUNICATIONS

IF4.5

2025-04-010

PRE

Minghao Huang

个人简介

教育背景

工作经历

荣誉奖项

研究方向