logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
祁超 封面图

祁超 (Chao Qi)

northwestern polytechnical university

32H指数
158论文数
4.4K被引数
收录论文 58
发表时间
logo
Simultaneous enhancement of strength and ductility in additively manufactured pure titanium via in situ TiB reinforcement通过原位TiB增强增材制造的纯钛的强度和韧性同步提升
errJournal of Materials Research and Technology-JMR&T
IF6.6
err2026-10-12
err0
errOAAI
errHangyu Yue; Hongwu Gao; Dongdong Zhu; Qi Chao; Hui Peng
err分享
err收藏
Confusion-Resistant Learning for Few-Shot Oriented Object Detection in Aerial Images抗混淆学习用于小样本有向目标检测的航空图像
errRemote Sensing
IF4.1
err2026-09-08
err0
errOAAI
errYang Yang; Lingjun Li; Yuanhang Wang; Chao Qi; Linlong Peng; Xiwen Yao
err分享
err收藏
Tailoring single-crystal-like textures in a non-weldable Ni-based superalloy by controlling overlap behavior in laser powder bed fusion通过控制激光粉末床熔融过程中的重叠行为，在一种不可焊接的镍基高温合金中定制单晶状织构。
errJournal of Materials Processing Technology
IF7.5
err2025-11-07
err0
PREAI
errFangxian Zhang; Chuanqiang Peng; Tao Zhu; Xinliang Xie; Liping Zhou; Yang Li; Qi Chao; Guohua Fan
err分享
err收藏
Dual role of dissolved oxygen in sulfidation-xanthate flotation of anglesite from zinc leaching residue溶解氧在从锌浸出渣中浮选闪锌矿的硫化-黄药浮选中的双重作用
errSEPARATION AND PURIFICATION TECHNOLOGY
IF9
err2025-05-28
err0
PREAI
errShi, Qing; Zhang, Feng; Qi, Chao; Miao, Yan
err分享
err收藏
Heterogenous lamellar structure designed in additively manufactured 316L stainless steel through layer-wise engineering通过分层工程设计的增材制造316L不锈钢中的异质层状结构
errMaterials Research Letters
IF7.9
err2025-05-28
err0
errOAAI
errXinliang Xie; Bo Zhou; Chuanqiang Peng; Fangxian Zhang; Qingquan Lai; Qi Chao; Guohua Fan; Qing Liu
err分享
err收藏
Achieving balanced mechanical properties in laser powder b e d fusion processed Inconel 718 superalloy through a simplified heat treatment process通过简化的热处理工艺在激光粉末b e d熔融加工的Inconel 718高温合金中实现平衡的机械性能
errJOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
IF14.3
err2025-05-01
err1
PREAI
errDing, Ziyi; Miao, Kesong; Chao, Qi; Xie, Xinliang; Ji, Xia; Wu, Hao; Wang, Xiaojun; Fan, Guohua
err分享
err收藏
Effect of scan strategy and substrate preheating on crack formation in IN738LC Ni-based superalloy during laser powder bed fusion激光粉末床熔融过程中扫描策略和基板预热对IN738LC镍基高温合金裂纹形成的影响
errMATERIALS CHARACTERIZATION
IF5.5
err2025-03-01
err0
PREAI
errXie, Xinliang; Zhang, Fangxian; Peng, Chuanqiang; Yan, Xiaopeng; Chao, Qi; Li, Yang; Li, Rengeng; Liu, Xiaolong; Fan, Guohua
err分享
err收藏
Crack inhibition and crystallographic texture control in an additively manufactured IN738LC Ni-based superalloy
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2024-11-01
err0
errOAAI
errZhang, Fangxian; Zhou, Liping; Xie, Xinliang; Zhang, Zhenbo; Chao, Qi; Fan, Guohua
err分享
err收藏
Enhanced mechanical properties of the additively manufactured IN738LC superalloy through thermal history management during the laser powder bed fusion process通过激光粉末床熔融过程中的热历史管理，增强了增材制造的IN738LC高温合金的机械性能
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2024-11-01
err0
PREAI
errYan, Xiaopeng; Qian, Jinbiao; Xie, Xinliang; Zhang, Fangxian; Wu, Hao; Li, Rengeng; Li, Yang; Chao, Qi; Fan, Guohua
err分享
err收藏
Multibeam water column image super-resolution by combining morphological and intensity features
errINTERNATIONAL JOURNAL OF DIGITAL EARTH
IF4.9
err2024-09-02
err1
errOAAI
errChen, Jianbing; Wu, Ziyin; Wang, Ruifu; Wang, Mingwei; Liang, Qianyong; Qi, Chao; Yang, Fanlin
err分享
err收藏
The Influence of Post-Treatment on Micropore Evolution and Mechanical Performance in AlSi10Mg Alloy Manufactured by Laser Powder Bed Fusion后处理对激光粉末床熔融AlSi10Mg合金中微孔演变和力学性能的影响
errMATERIALS
IF3.2
err2024-08-30
err0
errOAAI
errPu, Qing; Qian, Jinbiao; Zhang, Yingwei; Yang, Shangjing; Huang, Hongshou; Chao, Qi; Fan, Guohua
err分享
err收藏
Effect of TiB 2 on the microstructure and mechanical properties of TiAl alloy produced by laser direct energy depositionTiB 2对激光直接能量沉积TiAl合金组织和力学性能的影响
errMATERIALS CHARACTERIZATION
IF5.5
err2024-06-01
err2
PREAI
errYue, Hangyu; Yang, Jibang; Wang, Yunluo; Miao, Kesong; Yao, Youxing; Yang, Jixin; Xie, Xinliang; Chao, Qi; Fan, Guohua
err分享
err收藏
3D printing of flexible batteries for wearable electronics用于可穿戴电子产品的柔性电池的3D打印
errJOURNAL OF POWER SOURCES
IF7.9
err2024-05-01
err5
PREAI
errYang, Hao; Fang, Haiqiu; Wang, Wanli; Zhang, Dongqing; Zhu, Jiexin; Chen, Kuo; Sun, Yi; Wang, Peixiang; Zhou, Qiang; Qi, Chao; Wang, Bin; Wu, Mingbo
err分享
err收藏
AlxCoCrFeNi high entropy alloys from metal scrap: Microstructure and mechanical properties
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2024-03-01
err15
errOAAI
errChao, Q.; Joseph, J.; Annasamy, M.; Hodgson, P.; Barnett, M. R.; Fabijanic, D.
err分享
err收藏
Four-In-One Multifunctional Dandelion-Like Gold@platinum Nanoparticles-Driven Multimodal Lateral Flow Immunoassay四合一多功能类蒲公英金 @ 铂纳米颗粒驱动的多模式侧流免疫分析
errSMALL
IF12.1
err2024-02-16
err13
PREAI
errWang, Zexiang; Zou, Rubing; Yi, Jiuhong; Wang, Yidan; Hu, Hong; Qi, Chao; Lai, Weihua; Guo, Yirong; Xianyu, Yunlei
err分享
err收藏
3D printing of customized functional devices for smart biomedical systems
errSMARTMAT
IF12.8
err2023-09-20
err11
errOAAI
errYang, Hao; Fang, Haiqiu; Wang, Chongze; Wang, Yanjiao; Qi, Chao; Zhang, Yunlong; Zhou, Qiang; Huang, Mengxin; Wang, Min; Wu, Mingbo
err分享
err收藏
In-situ control of residual stress and its distribution in a titanium alloy additively manufactured by laser powder bed fusion激光粉末床熔融增材制造钛合金中残余应力及其分布的原位控制
errMATERIALS CHARACTERIZATION
IF5.5
err2023-07-01
err18
PREAI
errChen, Xinyue; Xie, Xinliang; Wu, Hao; Ji, Xia; Shen, Haopeng; Xue, Muhan; Wu, He; Chao, Qi; Fan, Guohua; Liu, Qing
err分享
err收藏
Heat treatment for metal additive manufacturing金属增材制造的热处理
errPROGRESS IN MATERIALS SCIENCE
IF40
err2023-03-01
err192
PREAI
errLaleh, Majid; Sadeghi, Esmaeil; Revilla, Reynier, I; Chao, Qi; Haghdadi, Nima; Hughes, Anthony E.; Xu, Wei; De Graeve, Iris; Qian, Ma; Gibson, Ian; Tan, Mike Y.
err分享
err收藏
The influence of processing and texture on the grain boundary character distribution of an austenitic Ni-30Fe alloy
errMATERIALS CHARACTERIZATION
IF5.5
err2023-03-01
err2
errOAAI
errBeladi, Hossein; Chao, Qi; Tari, Vahid; Rohrer, Gregory S.
err分享
err收藏
A review of boron nitride-based photocatalysts for carbon dioxide reduction
errJOURNAL OF MATERIALS CHEMISTRY A
IF9.5
err2023-01-01
err21
PREAI
errLaghaei, Milad; Ghasemian, Mohsen; Lei, Weiwei; Kong, Lingxue; Chao, Qi
err分享
err收藏

研究方向

复杂系统智能规划优化调度方法公共安全与应急管理航天器运行管理工程管理生产服务
合作学者
合作期刊
N
N. Birbilis
H 指数: 99 · 论文数: 593
王林 封面图
王林 (Lin Wang)
H 指数: 92 · 论文数: 1.4K
M
Martin Z. Bazant
H 指数: 91 · 论文数: 701
S
Simon P. Ringer
H 指数: 87 · 论文数: 768
Xiaozhou Liao 封面图
Xiaozhou Liao (Xiaozhou Liao)
H 指数: 87 · 论文数: 444
查看更多