logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
J

Jorge Santolaria

University of Zaragoza

26H指数
167论文数
2.5K被引数
收录论文 43
发表时间
logo
Surface roughness prediction in turning processes for grey cast iron: A hybrid machine learning approach integrating infrared thermography灰铸铁车削过程中表面粗糙度的预测：一种集成红外热成像的混合机器学习方法
errEngineering Applications of Artificial Intelligence
IF8
err2025-09-10
err0
PREAI
errSergio Aguado; Marcos Pueo; Raquel Acero; Ana Cristina Majarena; Jorge Santolaria
err分享
err收藏
Inaccuracy of machine tools due to verification conditions
errMEASUREMENT
IF5.6
err2022-01-01
err3
PREAI
errAguado, Sergio; Perez, Pablo; Albajez, Jose Antonio; Velazquez, Jesus; Santolaria, Jorge
err分享
err收藏
Study on LT Accuracy Improvement by Calibration Based on Network Measurements基于网络测量的校准提高LT精度的研究
errSENSORS
IF3.5
err2021-11-10
err0
errOAAI
errVelazquez, Jesus; Conte, Javier; Majarena, Ana Cristina; Santolaria, Jorge
err分享
err收藏
Design of a Multi-Point Kinematic Coupling for a High Precision Telescopic Simultaneous Measurement System
errSENSORS
IF3.5
err2021-09-23
err2
errOAAI
errAcero, Raquel; Aguilar, Juan Jose; Brosed, Francisco Javier; Santolaria, Jorge; Aguado, Sergio; Pueo, Marcos
err分享
err收藏
Characterization and parameters sensitivity analysis of worm gear rolling measurement
errMEASUREMENT
IF5.6
err2020-12-01
err3
errOAAI
errPueo, M.; Acero, R.; Santolaria, J.
err分享
err收藏
Measuring Sensors Calibration in Worm Gear Rolling Testers
errSENSORS
IF3.5
err2020-06-02
err2
errOAAI
errPueo, Marcos; Acero, Raquel; Gracia, Angel; Santolaria, Jorge
err分享
err收藏
Configuration Optimisation of Laser Tracker Location on Verification Process
errMATERIALS
IF3.2
err2020-01-10
err9
errOAAI
errAguado, Sergio; Perez, Pablo; Antonio Albajez, Jose; Santolaria, Jorge; Velazquez, Jesus
err分享
err收藏
Uncertainty budget analysis for worm and worm gear single-flank rolling tests
errMEASUREMENT
IF5.6
err2020-01-01
err6
errOAAI
errPueo, M.; Acero, R.; Lope, M. A.; Santolaria, J.
err分享
err收藏
Development and Validation of a Calibration Gauge for Length Measurement Systems
errMATERIALS
IF3.2
err2019-11-29
err4
errOAAI
errBrosed, Francisco Javier; Acero Cacho, Raquel; Aguado, Sergio; Herrer, Marta; Aguilar, Juan Jose; Santolaria Mazo, Jorge
err分享
err收藏
Measurement uncertainty evaluation model in radial composite gear inspection
errPRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
IF3.7
err2019-11-01
err12
errOAAI
errPueo, M.; Acero, R.; Lope, M. A.; Santolaria, J.
err分享
err收藏
Design methodology for production systems retrofit in SMEs
errINTERNATIONAL JOURNAL OF PRODUCTION RESEARCH
IF7.3
err2019-08-11
err6
PREAI
errPueo, Marcos; Santolaria, Jorge; Acero, Raquel; Sierra-Perez, Jorge
err分享
err收藏
Study on Machine Tool Positioning Uncertainty Due to Volumetric Verification
errSENSORS
IF3.5
err2019-06-26
err7
errOAAI
errAguado, Sergio; Perez, Pablo; Antonio Albajez, Jose; Santolaria, Jorge; Velazquez, Jesus
err分享
err收藏
Influence of laser tracker noise on the uncertainty of machine tool volumetric verification using the Monte Carlo method
errMEASUREMENT
IF5.6
err2019-02-01
err12
errOAAI
errPerez, P.; Aguado, S.; Albajez, J. A.; Santolaria, J.
err分享
err收藏
Matrix architecture plays a pivotal role in 3D osteoblast migration: The effect of interstitial fluid flow基质结构在3D成骨细胞迁移中起着关键作用: 间质液流动的影响
errJOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
IF3.5
err2018-07-01
err19
errOAAI
errDel Amo, Cristina; Olivares, Vanesa; Condor, Mar; Blanco, Alejandro; Santolaria, Jorge; Asin, Jesus; Borau, Carlos; Manuel Garcia-Aznar, Jose
err分享
err收藏
A review of tangential composite and radial composite gear inspection
errPRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
IF3.7
err2017-10-01
err23
errOAAI
errPueo, M.; Santolaria, J.; Acero, R.; Gracia, A.
err分享
err收藏
Glioblastoma on a microfluidic chip: Generating pseudopalisades and enhancing aggressiveness through blood vessel obstruction events
errNEURO-ONCOLOGY
IF13.4
err2017-01-06
err78
errOAAI
errAyuso, Jose M.; Monge, Rosa; Martinez-Gonzalez, Alicia; Virumbrales-Munoz, Maria; Llamazares, Guillermo A.; Berganzo, Javier; Hernandez-Lain, Aurelio; Santolaria, Jorge; Doblare, Manuel; Hubert, Christopher; Rich, Jeremy N.; Sanchez-Gomez, Pilar; Perez-Garcia, Victor M.; Ochoa, Ignacio; Fernandez, Luis J.
err分享
err收藏
Evaluation of a metrology platform for an articulated arm coordinate measuring machine verification under the ASME B89.4.22-2004 and VDI 2617_9-2009 standards
errJOURNAL OF MANUFACTURING SYSTEMS
IF14.2
err2017-01-01
err11
errOAAI
errAcero, R.; Brau, A.; Santolaria, J.; Pueo, M.
err分享
err收藏
Virtual Distances Methodology as Verification Technique for AACMMs with a Capacitive Sensor Based Indexed Metrology Platform虚拟距离方法作为基于电容式传感器的索引计量平台的aacmm的验证技术
errSENSORS
IF3.5
err2016-11-18
err11
errOAAI
errAcero, Raquel; Santolaria, Jorge; Brau, Agustin; Pueo, Marcos
err分享
err收藏
Analysis of the initial thermal stabilization and air turbulences effects on Laser Tracker measurements
errJOURNAL OF MANUFACTURING SYSTEMS
IF14.2
err2016-10-01
err29
errOAAI
errMunoz, Pablo Perez; Albajez Garcia, Jose Antonio; Mazo, Jorge Santolaria
err分享
err收藏
Improving a real milling machine accuracy through an indirect measurement of its geometric errors
errJOURNAL OF MANUFACTURING SYSTEMS
IF14.2
err2016-07-01
err23
PREAI
errAguado, Sergio; Santolaria, Jorge; Samper, David; Aguilar, Juan J.; Velazquez, Jesus
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
J
Jeremy N. Rich
H 指数: 127 · 论文数: 1.5K
M
M. Doblaré
H 指数: 63 · 论文数: 444
V
Victor M. Pérez-Garcı́a
H 指数: 50 · 论文数: 337
J
José Manuel García‐Aznar
H 指数: 46 · 论文数: 289
P
Pilar Sánchez‐Gómez
H 指数: 35 · 论文数: 179
查看更多