logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
李小武 封面图

李小武 (Xiaowu Li)

Northeastern University

39H指数
279论文数
4.9K被引数
收录论文 128
发表时间
logo
A comparative study on fatigue behavior of IN740H and H282 Ni-based superalloys at 700 °C700 °C下IN740H和H282镍基高温合金疲劳行为比较研究
errJournal of Materials Research and Technology-JMR&T
IF6.6
err2026-07-22
err0
errOAAI
errF. Shi; M.M. Zhang; X.J. Guan; Y.S. Wu; L.Z. Zhou; X.W. Li
err分享
err收藏
Slip-mode evolution governed by short range order and its decisive effect on strength–ductility synergy in prefatigued Ni–Cr alloys由短程有序调控的滑移模式演化及其对预疲劳Ni–Cr合金强度-塑性协同的决定性影响
errInternational Journal of Fatigue
IF6.8
err2026-06-13
err0
PREAI
errJ. Ma; Z.X. Hua; M.S. Jiang; J. Tan; X.W. Li; F. Liu
err分享
err收藏
Critical Interface/Fiber Energy Ratio Unlocks Optimal Bending Performance in Biological and Bioinspired Crossed-Lamellar Structures关键界面/纤维能量比解锁生物及仿生十字层状结构的最佳弯曲性能
errJournal of Bionic Engineering
IF5.8
err2026-06-08
err0
PREAI
errYingying Li; Simin Liang; Hongmei Ji; Xiaowu Li
err分享
err收藏
Improving strength-ductility match in FCC metals by cyclic pre-deformation: a case study on Cu-7at.%Al alloys with medium stacking fault energy通过循环预变形改善面心立方金属的强度-延性匹配：以中堆垛层错能Cu-7at.%Al合金为例
errmaterials science and engineering: a
IF0
err2026-03-17
err0
PREAI
errHong-Mei Ji; Na Peng; Jin Ma; Zi-Peng Jia; Ying Yan; Xiao-Wu Li
err分享
err收藏
Duplex-Phase Fe-Mn-Al-C Low-Density Steels: A Review on Their Alloy Design, Processing, Mechanical and Application PerformancesDuplex-Phase Fe-Mn-Al-C低密度钢：关于其合金设计、加工、力学性能及应用性能的综述
errMaterials
IF3.2
err2026-03-01
err0
errOAAI
errPeng Chen; Yan Lin; Liu-Jiang Yue; Rong Chen; Yi Wang; Ting-Jun Zhang; Xiao-Wu Li
err分享
err收藏
Influence of Ga Content and Pre-Treatment on the Mechanical Properties of High-Mg-Content Al-Mg-Zn-Ga AlloysGa含量和预处理对高Mg含量Al-Mg-Zn-Ga合金力学性能的影响
errMetals
IF2.5
err2026-02-09
err0
errOAAI
errBoyu Xue; Qilong Liu; Wei Xiao; Xiwu Li; Guanjun Gao; Hongwei Yan; Kai Wen; Xiaowu Li; Yongan Zhang; Ligen Wang; Baiqing Xiong
err分享
err收藏
Fatigue properties of Fe-30.5Mn-8Al-1C austenitic low-density steel: Critical impact of κ-carbide precipitation stateFe-30.5Mn-8Al-1C奥氏体低密度钢的疲劳性能：κ碳化物析出状态的临界影响
errInternational Journal of Fatigue
IF6.8
err2025-12-30
err0
PREAI
errJ.H. Du; P. Chen; Z.P. Jia; X.W. Li
err分享
err收藏
Synchronously improving strength and ductility in CoCrNi medium-entropy alloy by synergy of grain boundary engineering and short-range order tuning通过晶界工程与短程有序调控协同作用，同步提升CoCrNi中熵合金的强度和延性
errMaterials Science and Engineering: A
IF0
err2025-12-22
err0
PREAI
errZ.P. Jia; J.Y. Li; X.J. Guan; J.J. Yi; F. Shi; X.W. Li
err分享
err收藏
Association of glycemic variability with short- and long-term mortality in critically ill patients with trauma创伤性危重患者血糖变异性与短期及长期死亡率的相关性
errScientific Reports
IF3.9
err2025-12-21
err0
errOAAI
errBing Liu; Jianghua Zhang; Chuangye Song; Jianjun Miao; Xiaowu Li; Jin Wang; Ruichang Lv; Xiaomei Wang; Xiaoning Liu; Guohong Jia
err分享
err收藏
Risk assessment of slope failure in 2D spatially variable soils using a verified dual-criteria final slip surface approach基于验证的双准则最终滑动面方法对二维空间变异性土体边坡失稳的风险评估
errEngineering Computations
IF1.9
err2025-12-01
err0
PREAI
errLi, Dongxian; Zhang, Qiyi; Li, Liang; Li, Xiaowu; Zhao, Wenhao
err分享
err收藏
Overcoming grain boundary brittleness at intermediate temperature in L12-strengthened multi-principal element alloys by engineering grain boundary: A case study on (NiCoCr)94Al3Ti3 alloy通过调控晶界克服L12强化多主元合金在中间温度下的晶界脆性：以(NiCoCr)94Al3Ti3合金为例
errJournal of Materials Science & Technology
IF14.3
err2025-11-27
err0
PREAI
errShaoxin Cai; Dong Han; Jingping Cui; Baijun Yang; Tianrun Li; Xiaowu Li; Xiaoming Wang; Jianqiang Wang
err分享
err收藏
Entropy-mediated ultrafine PdSnPtAgBi nanoparticles as a high-performance electrocatalyst with enhanced CO tolerance for alcohol oxidation熵介导的超细PdSnPtAgBi纳米颗粒作为具有增强CO耐受性的高性能电催化剂，用于醇氧化。
errJournal of Colloid and Interface Science
IF9.7
err2025-11-19
err0
PREAI
errYuanhang Ma; Sichen Li; Xiaoqi Yang; Yawei Li; Ruoyu Bian; Arslan Hameed; Xiao Chen; Xiaowu Li; Shoujie Liu; Kun Wang; Ping Chen; Peng Li
err分享
err收藏
Short-range ordering dictates unique interpenetrating wavy/planar-slip fatigue dislocation structures in a Ni-Cr alloy with high stacking fault energy短程有序决定了高堆垛层错能的Ni-Cr合金中独特的相互贯穿的波浪状/平面滑移疲劳位错结构。
errJournal of Materials Science & Technology
IF14.3
err2025-10-12
err0
PREAI
errJ. Ma; F. Liu; J. Tan; X.W. Li
err分享
err收藏
Effect of Heterogeneous Microstructural Morphology on Tensile Behavior in a Series of High-Strength Wind Power Steels高风能钢系列中异质微观结构形态对拉伸行为的影响
errActa Metallurgica Sinica (English Letters)
IF0
err2025-10-11
err0
PREAI
errChong Gao; Zi-Hao Chen; Zhi-Zhi Liang; Li-Xi Xiong; Jian-Chao Pang; Heng Ma; Kang He; Shou-Xin Li; Xiao-Wu Li; Zhe-Feng Zhang
err分享
err收藏
Achieving high strength-ductility synergy and wear resistance in a kappa-carbide reinforced high specific Young's modulus steel by vanadium microalloying通过钒微合金化，在κ-碳化物增强的高比杨氏模量钢中实现高强度-延性协同和高耐磨性
errJournal of Materials Research and Technology
IF6.6
err2025-10-07
err0
errOAAI
errPeng Chen; Fu-Ming Yang; Hao-Xuan Zhang; Xiao-Wu Li
err分享
err收藏
Investigation on the Microstructure-Dependent Wear Resistance of a Fe-Al-C-V High Specific Young's Modulus SteelFe-Al-C-V高比杨氏模量钢的微观结构依赖性耐磨性研究
errSTEEL RESEARCH INTERNATIONAL
IF2.5
err2025-10-01
err0
PREAI
errHe, Yukun; Xu, Changbo; Chen, Peng; Yang, Fuming; Zhang, Haoxuan; Li, Xiaowu
err分享
err收藏
Mechanical properties and biomimetic applications of prismatic structures in mollusk shells: a review贝类壳中棱柱状结构的力学性能与仿生应用：综述
errInternational Journal of Structural Integrity
IF3
err2025-08-22
err0
PREAI
errHaoyu Xia; Xin Wang; Hongmei Ji; Xiaowu Li
err分享
err收藏
An optimal grain boundary engineering approach to improving the mechanical properties of FeCoCrNi high-entropy alloys at different temperatures一种优化晶界工程方法以提高FeCoCrNi高熵合金在不同温度下的力学性能
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2025-07-01
err0
PREAI
errJia, Z. P.; Guan, X. J.; Shi, F.; Li, X. W.
err分享
err收藏
Investigation on the fracture toughness of a low-density δ-quenching and partitioning steel sheet
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2025-03-01
err0
errOAAI
errLi, Z. L.; Cui, D. D.; Zhang, Y. S.; Chen, D.; Gao, L.; Wang, X. Q.; Li, X. W.
err分享
err收藏
Influence of prefatigue on the tensile strength and ductility of Ni-10at.%Cr alloys: Critical role of short range ordering
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2025-02-01
err0
PREAI
errMa, J.; Liu, F.; Tan, J.; Li, X. W.
err分享
err收藏

研究方向

金属晶体的循环形变行为及微观变形机制金属材料的强韧化及微观机理先进结构材料的（疲劳）变形与断裂生物仿生材料的微观结构、力学行为及强韧化机理用于组织工程的生物活性陶瓷和金属材料
合作学者
合作期刊
M
Marc A. Meyers
H 指数: 111 · 论文数: 684
李亮 封面图
李亮 (Liang Li)
H 指数: 107 · 论文数: 1.3K
王强 封面图
王强 (Qiang Wang)
H 指数: 102 · 论文数: 1.5K
燕
燕召 (Yan Zhao)
H 指数: 98 · 论文数: 900
Z
Z.Y. Ma
H 指数: 83 · 论文数: 637
查看更多