Christian Haase - Publications, H-index & Citations

Christian Haase

technical university berlin

41H指数

220论文数

5.2K被引数

收录论文 71

发表时间

Study of the Role of Geometry on the Residual Stresses Development in Laser-Based Powder Bed Fusion As-Built Ti-6Al-4V Components Using Finite Element Simulations 使用有限元模拟研究几何形状对激光粉末床熔合制造条件下Ti-6Al-4V构件残余应力发展的影响

Advanced Engineering Materials

IF3.3

2026-09-09

PREAI

Avinash Gonnabattula; Avinash Hariharan; David Canelo-Yubero; Emad Maawad; Anil Kumar Vesangi; Christian Haase; Anand K. Kanjarla

Deciphering the effect of microstructural heterogeneities on the macro- and micro-mechanical behaviour of additively manufactured high-strength aluminium alloys 揭示增材制造高强铝合金微观结构异质性对其宏观与微观力学行为的影响

MATERIALS & DESIGN

IF7.9

2026-08-31

OAAI

S. Basu; S. Murugesan; J. Gehlmann; N.J. Peter; A. Hariharan; F. Brasche; C. Haase

Processability and interfacial characteristics in PBF-LB/M-processed nano-B4C/AlSi10Mg composites with superior high-temperature mechanical performance

materials science and engineering: a

IF0

2026-01-28

OAAI

Abdelrahman Elsayed; Ivo Šulák; Frederike Brasche; Tarek Allam; Marion Kreins; Ulrich Krupp; Christian Haase

Influence of isothermal post-treatment on tribocorrosion behaviour of laser powder bed fusion-processed β-type Ti-Nb alloy 等温后处理对激光粉末床熔融制备β型Ti-Nb合金摩擦腐蚀行为的影响

Materials Today Communications

IF4.5

2025-10-31

OAAI

Adnan Akman; Yohan Douest; Jaqueline Gehlmann; Avinash Hariharan; Christian Haase; Ana-Maria Trunfio Sfarghiu; Nicolas Courtois; Benoit Ter-Ovanessian; Stefan Pilz; Martina Zimmermann; Annett Gebert

Cellular Automaton Simulation Model for Predicting the Microstructure Evolution of an Additively Manufactured X30Mn21 Austenitic Advanced High-Strength Steel 基于细胞自动机的增材制造X30Mn21奥氏体先进高强度钢微观结构演化预测模型

Metals 2025, Vol. 15, Page 770

IF2.5

2025-08-24

PREAI

Ashutosh Singh; Christian Haase; Luis A. Barrales-Mora

Harnessing additive manufacturing-induced microstructure and solute heterogeneities for the design of precipitation-strengthened alloys 利用增材制造诱导的微观结构和溶质异质性进行沉淀强化合金的设计

Acta Materialia

IF9.3

2025-08-08

OAAI

Ahmet Turnali; Avinash Hariharan; Efthymios Polatidis; Nicolas J. Peter; Jaqueline Gehlmann; Christos Sofras; Zoltan Hegedüs; Lennart Sayk; Tarek Allam; Johannes Henrich Schleifenbaum; Christian Haase

Influence of vanadium carbides and stacking fault energy on the low-cycle fatigue behavior of a face-centered cubic multi-principal element alloy 碳化钒和层错能对一种面心立方多主元合金低周疲劳行为的影响

International Journal of Fatigue

IF6.8

2025-07-05

PREAI

Felix Oppermann; Christian Hinte; Steffen Wackenrohr; Ulrich Krupp; Hans Jürgen Maier; Christian Haase

High-Speed 3D Printing Coupled with Machine Learning to Accelerate Alloy Development for Additive Manufacturing 高速3D打印与机器学习相结合，以加速增材制造合金开发

ADVANCED SCIENCE

IF14.1

2025-03-07

OAAI

Hariharan, A; Ackermann, M; Koss, S; Khosravani, A; Schleifenbaum, JH; Köhnen, P; Kalidindi, SR; Haase, C

Segregation-guided alloy design via tailored solidification behavior

MATERIALS TODAY ADVANCES

IF8

2025-03-01

OAAI

Turnali, Ahmet; Kibaroglu, Dilay; Evers, Nico; Gehlmann, Jaqueline; Sayk, Lennart; Peter, Nicolas J.; Elsayed, Abdelrahman; Noori, Mehdi; Allam, Tarek; Schleifenbaum, Johannes Henrich; Haase, Christian

In situ carbide formation causing strain-age cracking in additively manufactured, highly alloyed steels

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2025-03-01

OAAI

Oppermann, Felix; Bernsmann, Jan-Simeon; Kies, Fabian; Gehlmann, Jaqueline; Theunissen, Jan; Schleifenbaum, Johannes Henrich; Haase, Christian

Thermo-micro-mechanical modeling of plasticity and damage in single-phase S700 steel

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

IF9.4

2025-01-01

OAAI

Ramalingam, Karthik; Motaman, S. Amir H.; Haase, Christian; Krupp, Ulrich

Influence of vanadium-carbide precipitation on the deformation behavior of Fe-30Mn-10Co-10Cr-2.5 V-1.5C multi-principal element alloy

MATERIALS & DESIGN

IF7.9

2024-05-01

OAAI

Oppermann, Felix; Kies, Fabian; Noori, Mehdi; Pradeep, K. G.; Hallstedt, Bengt; Haase, Christian

High-speed direct energy deposition as a high-throughput design tool for laser-based additive manufacturing 高速直接能量沉积作为基于激光的增材制造的高通量设计工具

ADDITIVE MANUFACTURING LETTERS

IF4.7

2024-02-01

OAAI

Buessenschuett, Klaus; Koehnen, Patrick; Kies, Fabian; Koss, Stephan; Schleifenbaum, Johannes Henrich; Haase, Christian

Evolution of microstructural heterogeneities in additively manufactured low-alloy steel 添加制造的低合金钢中微观结构异质性的演变

ADDITIVE MANUFACTURING

IF11.1

2023-09-01

OAAI

Turnali, Ahmet; Motaman, S. Amir H.; Chang, Yuling; Boettger, Bernd; Serafeim, Alexandros; Sayk, Lennart; Peter, Nicolas J.; Richter, Silvia; Schwedt, Alexander; Hoeges, Simon; Haase, Christian

Understanding the mechanism of columnar-to-equiaxed transition and grain refinement in additively manufactured steel during laser powder bed fusion

ADDITIVE MANUFACTURING

IF11.1

2023-07-01

OAAI

Samy, Venkatesh Pandian Narayana; Schaefle, Moritz; Brasche, Frederike; Krupp, Ulrich; Haase, Christian

3D characterization of magnetic phases through neutron polarization contrast tomography

ADDITIVE MANUFACTURING LETTERS

IF4.7

2023-07-01

OAAI

Busi, Matteo; Polatidis, Efthymios; Samothrakitis, Stavros; Koehnen, Patrick; Malamud, Florencia; Haase, Christian; Strobl, Markus