logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
M

Man Soo Joun

gyeongsang national university

27H指数
170论文数
2.2K被引数
收录论文 52
发表时间
logo
Friction during forward and backward extrusion focusing on the lubrication regime change正反向挤压过程中的摩擦，重点关注润滑状态的变化
errJournal of Materials Research and Technology
IF6.6
err2026-06-06
err0
errOAAI
errMin Cheol Park; Yun Heo; Eung Zu Kim; Dong Hwan Kim; Byoung Yoon Jun; Man Soo Joun
err分享
err收藏
Experimental and FEM Investigation of Dynamic and Static Recrystallization with Grain Growth in SCM440 Steel During Hot CompressionSCM440钢热压缩过程中动态与静态再结晶及晶粒生长的实验与有限元研究
errJournal of Materials Research and Technology
IF6.6
err2026-03-19
err0
errOAAI
errMohd Kaswandee Razali; Nam Yun Kim; Nam Hyeon Kim; Man Soo Joun
err分享
err收藏
Determination of Damage Constant and Critical Damage by the Combined Experiment and FEM Using the Reference Processes通过参考过程结合实验和有限元方法确定损伤常数和临界损伤
errMetals 2025, Vol. 15, Page 1376
IF2.5
err2025-12-16
err0
errOAAI
errBoseung Hong; Hyeonmin Lee; Seokmoo Hong; Mansoo Joun
err分享
err收藏
Flow Characterization Focusing on Simultaneous Compensation of Temperature and Friction Using the Hot Compression Test流动特性表征：聚焦于使用热压缩试验同时补偿温度和摩擦
errSTEEL RESEARCH INTERNATIONAL
IF2.5
err2025-12-01
err0
PREAI
errKim, Nam-yun; Kim, Nam-hyeon; Kim, Min-cheol; Razali, Mohd Kaswandee; Choi, Ji-woong; Joun, Man-soo
err分享
err收藏
A Review of Friction and Lubricant in Metal Forming金属成形中摩擦与润滑的综述
errLubricants 2025, Vol. 13, Page 512
IF2.9
err2025-11-27
err0
errOAAI
errMan Soo Joun; Min Cheol Park; Yun Heo; Dong Hwan Kim
err分享
err收藏
Combined elastoplastic finite element method and tube tensile test method to accurately characterize flow behaviors of tubular metallic materials结合弹塑性有限元法与管材拉伸试验法，以准确表征管状金属材料的流动行为
errThe International Journal of Advanced Manufacturing Technology
IF0
err2025-11-20
err0
PREAI
errBo Seung Hong; Young Bin Shin; Dong Suk Jung; Seok Moo Hong; Man Soo Joun
err分享
err收藏
Evaluation of an empirically evolved tube drawing process design based on the academic process design criteria基于学术工艺设计标准的经验性演变管材拉伸工艺设计评估
errThe International Journal of Advanced Manufacturing Technology
IF0
err2025-09-23
err0
PREAI
errYun Heo; Bo Seung Hong; Yeong Bin Shin; Dong Suk Jung; Man Soo Joun
err分享
err收藏
Experimental and numerical study on fillet rolling of a Ti6Al4V alloy aircraft bolt focusing on fatigue life针对Ti6Al4V合金航空螺栓圆角滚压的疲劳寿命实验与数值研究
errJournal of Manufacturing Processes
IF6.8
err2025-07-21
err0
PREAI
errHyeon Min Lee; Hee Man Kwak; Jeong Muk Choi; Jae Gun Eom; Hae Ji Kim; Wan Jin Chung; Man Soo Joun
err分享
err收藏
Novel finite element analysis model for three-roller fillet rolling focusing on its strength of accuracy and practicability一种新型有限元分析模型，用于三辊角部滚压，重点关注其准确性和实用性。
errJournal of Materials Research and Technology
IF6.6
err2025-07-09
err0
errOAAI
errHyeon Min Lee; Hee Man Kwak; Jeong Muk Choi; Hae Ji Kim; Wan Jin Chung; Man Soo Joun
err分享
err收藏
Analytical and numerical evaluation of the relationship between elongation calibration function and cyber standard tensile tests for ductile materials脆性材料中伸长率校准函数与网络标准拉伸试验关系的解析与数值评估
errMATERIALS & DESIGN
IF7.9
err2025-05-01
err0
errOAAI
errKim, N. Y.; Kim, N. H.; Razali, M. K.; Lee, H. M.; Joun, M. S.
err分享
err收藏
Grain size prediction in SCR420HB hot forging: Combining phenomenological and JMAK models with experimental and numerical analysis
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2024-12-01
err0
PREAI
errRazali, Mohd Kaswandee; Heo, Yun; Irani, Missam; Chung, Suk Hwan; Joun, Man Soo
err分享
err收藏
On Lubrication Regime Changes during Forward Extrusion, Forging, and Drawing
errLUBRICANTS
IF2.9
err2024-10-14
err0
errOAAI
errJoun, Man-Soo; Heo, Yun; Kim, Nam-Hyeon; Kim, Nam-Yun
err分享
err收藏
Friction heat ball in round-to-half circle drawing and its effect on the material's skin shearing
errTRIBOLOGY INTERNATIONAL
IF6.9
err2024-09-01
err2
PREAI
errHeo, Y.; Kim, N. Y.; Nam, J. W.; Chung, I. G.; Joun, M. S.
err分享
err收藏
Ejector pin-related high-cycle fatigue fracture of the critical die corner during automatic multistage cold forging of an automotive wheel nut
errHELIYON
IF3.6
err2024-07-01
err0
errOAAI
errAbd Hamid, Nurhidayah; Byun, Jong Bok; Kang, Sung Muk; Lee, Kwang Hee; Chung, Wan Jin; Joun, Man Soo
err分享
err收藏
Tribological shifting phenomena during automatic multistage cold forging of an automotive Al6082-T6 steering yoke
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2024-03-01
err2
PREAI
errAbd Hamid, Nurhidayah; Kim, Kwang Min; Hwang, Tae Min; Choi, Jeong Muk; Joun, Man Soo
err分享
err收藏
Practical Approach for Determining Material Parameters When Predicting Austenite Grain Growth under Isothermal Heat Treatment
errMATERIALS
IF3.2
err2023-10-06
err3
errOAAI
errRazali, Mohd Kaswandee; Abd Ghawi, Afaf Amera; Irani, Missam; Chung, Suk Hwan; Choi, Jeong Muk; Joun, Man Soo
err分享
err收藏
Realistic finite element analysis model of the pilgering process to deal with initial tube thickness nonuniformity
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2023-06-01
err5
PREAI
errChung, S. H.; Jeong, S. W.; Chung, W. J.; Joun, M. S.
err分享
err收藏
Evaluation of the macroscopic formability of metallic materials using a cylinder compression test
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-03-01
err3
errOAAI
errJi, S. M.; Choi, J. M.; Joun, M. S.
err分享
err收藏
Practical approach for determining material parameters when predicting grain size after static recrystallization
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-03-01
err4
errOAAI
errRazali, Mohd Kaswandee; Ghawi, Afaf Amera Abd; Irani, Missam; Chung, Suk Hwan; Choi, Jeong Muk; Joun, Man Soo
err分享
err收藏
Accurate Flow Characterization of A6082 for Precision Simulation of a Hot Metal Forming Process
errMATERIALS
IF3.2
err2022-12-05
err3
errOAAI
errPark, Jeong-Hwi; Ji, Su-Min; Choi, Jeong-Muk; Joun, Man-Soo
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
S
Sai‐Ho Chung
H 指数: 46 · 论文数: 293
N
Nam‐Young Kim
H 指数: 43 · 论文数: 595
N
Nam Ho Kim
H 指数: 43 · 论文数: 362
Y
Yoon‐Uk Heo
H 指数: 36 · 论文数: 172
B
Bo Hong
H 指数: 35 · 论文数: 262
查看更多