logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
S

Sukhomay Pal

indian institute of technology (iit) - guwahati

28H指数
113论文数
2.5K被引数
收录论文 32
发表时间
logo
Understanding the microstructure and mechanical properties of IN625 weldment reinforced with nano-TiC particles理解纳米TiC颗粒增强的IN625焊件的微观结构和力学性能
errArchives of Civil and Mechanical Engineering
IF4.4
err2026-09-28
err0
PREAI
errDipankar Saha; Sukhomay Pal
err分享
err收藏
Design and processing of alumina ceramics through direct ink writing: insights into mechanical–microstructural characterization通过直接墨水书写设计加工氧化铝陶瓷：机械-微观结构表征的见解
errProgress in Additive Manufacturing
IF5.4
err2026-05-20
err0
PREAI
errGaurav Prakash; Sukhomay Pal; P. S. Robi
err分享
err收藏
Investigation of high temperature tensile properties of TLP bonded IN 718 superalloy高温下TLP连接IN 718超合金的拉伸性能研究
errPROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS
IF2.2
err2026-05-01
err0
PREAI
errTarai, Uk; Saha, Dipankar; Pal, Sukhomay; Robi, P. S.
err分享
err收藏
Short duration aging heat treatment for microstructural and mechanical properties improvement of IN625 weldment短时时效热处理对IN625焊件的微观结构和力学性能的改善
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2025-05-01
err0
PREAI
errSaha, Dipankar; Pal, Sukhomay
err分享
err收藏
Study of mechanical behaviour and microsegregation in interdendritic region of a single-pass plasma arc welding of thick IN625 plate
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2025-03-04
err0
PREAI
errSaha, Dipankar; Pal, Sukhomay
err分享
err收藏
Induction assisted autogenous plasma arc welding of HSLA steelHSLA钢的感应辅助自生等离子弧焊接
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2024-12-01
err1
PREAI
errBiswal, Sunil Kumar; Pal, Sukhomay
err分享
err收藏
Characterization of Mechanical Behavior in Solution-Treated Micro Plasma Arc Welded Blanks of Inconel 625
errMETALS AND MATERIALS INTERNATIONAL
IF4
err2024-11-28
err0
PREAI
errHaldar, Vivekananda; Pal, Sukhomay
err分享
err收藏
A review on phenomenological model subtleties for defect assessment in friction stir welding
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2024-06-01
err5
PREAI
errDas, Debtanay; Bag, Swarup; Pal, Sukhomay; De, Amitava
err分享
err收藏
Probing finite element modelling of defects in friction stir welding by tailoring mass scaling factor
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2023-06-01
err7
PREAI
errDas, Debtanay; Bag, Swarup; Pal, Sukhomay
err分享
err收藏
The effect of post-bond solution treatment and double aging on the microstructural evolution and mechanical properties of TLP-bonded IN718 joint
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2023-04-09
err0
PREAI
errTarai, U. K.; Pal, Sukhomay; Robi, P. S.
err分享
err收藏
Material Defects in Friction Stir Welding through Thermo-Mechanical Simulation: Dissimilar Materials with Tool Wear Consideration通过热机械模拟的搅拌摩擦焊中的材料缺陷: 考虑刀具磨损的异种材料
errMATERIALS
IF3.2
err2022-12-28
err15
errOAAI
errDas, Debtanay; Bag, Swarup; Pal, Sukhomay; Sharma, Abhay
err分享
err收藏
Fabrication and effect of Mg-Zn solid solution via Zn foil interlayer alloying in FSW process of magnesium alloy
errARCHIVES OF CIVIL AND MECHANICAL ENGINEERING
IF4.4
err2020-11-01
err8
PREAI
errSahu, Prakash Kumar; Pal, Sukhomay; Das, Bipul; Shi, Qingyu
err分享
err收藏
Analysis of weld characteristics of micro plasma arc welded thin stainless steel 306 L sheet
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2020-09-01
err23
PREAI
errPrasad, Srikant; Pal, Sukhomay; Robi, P. S.
err分享
err收藏
Friction stir selective alloying of different Al% particulate reinforced to AZ31 Mg for enhanced mechanical and metallurgical properties
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2020-02-01
err19
PREAI
errSahu, Prakash Kumar; Das, Jayashree; Chen, Gaoqiang; Liu, Qu; Pal, Sukhomay; Zeng, Shenbo; Shi, Qingyu
err分享
err收藏
Assessment of self-reacting bobbin tool friction stir welding for joining AZ31 magnesium alloy at inert gas environment
errJOURNAL OF MAGNESIUM AND ALLOYS
IF13.8
err2019-12-01
err22
errOAAI
errSahu, Prakash Kumar; Vasudevan, Nikhil P.; Das, Bipul; Pal, Sukhomay
err分享
err收藏
Effect of FSW parameters on microstructure and mechanical properties of AM20 welds
errMATERIALS AND MANUFACTURING PROCESSES
IF4.7
err2017-10-26
err40
PREAI
errSahu, Prakash Kumar; Pal, Sukhomay
err分享
err收藏
Torque based defect detection and weld quality modelling in friction stir welding process
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2017-06-01
err56
PREAI
errDas, Bipul; Pal, Sukhomay; Bag, Swarup
err分享
err收藏
Design and development of force and torque measurement setup for real time monitoring of friction stir welding process
errMEASUREMENT
IF5.6
err2017-06-01
err35
PREAI
errDas, Bipul; Pal, Sukhomay; Bag, Swarup
err分享
err收藏
Mechanical properties of dissimilar thickness aluminium alloy weld by single/double pass FSW
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2017-05-01
err46
PREAI
errSahu, Prakash Kumar; Pal, Sukhomay
err分享
err收藏
On the effect of tool offset in hybrid-FSW of copper-aluminium alloy
errMATERIALS AND MANUFACTURING PROCESSES
IF4.7
err2017-02-16
err33
PREAI
errYaduwanshi, D. K.; Bag, S.; Pal, S.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
S
Surjya K. Pal
H 指数: 56 · 论文数: 300
史清宇 封面图
史清宇 (Qingyu Shi)
H 指数: 42 · 论文数: 192
A
A. De
H 指数: 40 · 论文数: 143
P
P. Stephan Heyns
H 指数: 39 · 论文数: 224
陈高强 封面图
陈高强 (Gaoqiang Chen)
H 指数: 37 · 论文数: 125
查看更多